Extraction—spectrophotometric determination of trace amounts of iron in waters with pyrogallol red and zephiramine

The simple removal of excess of co-extracted reagent in the solvent extraction of metal complex anions with a quaternary ammonium salt greatly improves the determination of iron(II) with pyrogallol red and zephiramine. The method with pyrogallol red is suitable for the determination of trace amounts of iron in natural waters. The apparent molar absorptivities of the iron(II) complex in chloroform are 7.5×10⁴ and 10.3×10⁴ 1 mol^-1 cm^-1 at 560 and 298 nm, respectively. A large excess of reagent can be added, and the ternary complex can be completely extracted over the pH range 8.5–10. Masking agents allow most interferences to be suppressed. The method is suitable for the analysis of potable, river and sea waters.     

Generation of 6-(Trifluoromethyl)-4,5-dihydro-2(3H)-pyridone and the Application to Synthesis of Some Fused Nitrogen Heterocycles Carrying a Trifluoromethyl Group on the Bridgehead Position via Radical Cyclization of Dihydropyridones

Staudinger/aza-Wittig reaction of 6,6,6-trifluoro-5-oxohexanoyl azide with PPh(3) or PBu(3) was examined. A reactive intermediate acyl imine 1 was trapped by methanol. Without nucleophile, isomerized enamide form 3 was obtained. N-Iodobenzoylation and N-haloalkylation of 3 and following radical cyclization via the 5-exo or 6-exo mode gave benzoindolizidinone, indolizidinone, and quinolizidinone derivatives 10-14, which have a trifluoromethyl group at the bridgehead position adjacent to nitrogen. Although LiAlH(4) reduction of 10 and 11 gave a mixture of saturated benzoindolizidine 15 and amino alcohol 16, reduction with BH(3)/THF selectively gave the desired 15 and indolizidine 17 from 13.     

Synthesis of chitosan resin possessing 3,4-diamino benzoic acid moiety for the collection/concentration of arsenic and selenium in water samples and their measurement by inductively coupled plasma-mass spectrometry

A chitosan resin functionalized with 3,4-diamino benzoic acid (CCTS-DBA resin) was newly synthesized by using a cross-linked chitosan (CCTS) as base material. The adsorption behavior of trace amounts of elements on the CCTS-DBA resin was examined by the pretreatment with a mini-column and measurement of the elements by inductively coupled plasma-Mass spectrometry (ICP-MS). Arsenic(V) could be retained on the CCTS-DBA resin at pH 3 as an oxoanion of H₂AsO₄⁻. Selenium(VI) is strongly adsorbed at pH 2 and pH 3 as an oxoanion of SeO₄²⁻, while selenium(IV) as HSeO₃⁻ is adsorbed on the resin at pH 3. The sorption capacities are 82, 64, and 88 mg g⁻¹resin for As(V), Se(IV), and Se(VI), respectively. The effect of common anions and cations on the adsorption of As(V), Se(IV), and Se(VI) were studied; there was no interference from such anionic matrices as chloride, sulfate, phosphate, and nitrate up to 20 ppm, as well as from such artificial river water matrices as Na, K, Mg, and Ca after passing samples through the mini-column containing the resin. The CCTS-DBA resin was applied to the collection of arsenic and selenium species in bottled drinking water, tap water, and river water.     

Flow-injection spectrofluorometric determination of trace amounts of formaldehyde in water after derivatization with acetoacetanilide

A novel fluorophotometric method for formaldehyde determination in environmental waters was developed: the method does not require any enrichment procedures. A flow-injection analysis method for the spectrofluorometric determination of formaldehyde in waters, which is based on the reaction of formaldehyde with acetoacetanilide and ammonia, is proposed. The proposed method shows a good linearity from 0.50 to 40 × 10⁻⁷ M, and the limit of detection (LOD) of 3 × 10⁻⁹ M (0.09 ppb) is achievable. The sample throughput is 15 h⁻¹. One of the main advantages in the proposed method is that the reaction can be carried out at room temperature without any heating system. The effect of various interferences possibly present in the real water samples was investigated. Most cations and anions, as well as organic compounds, do not interfere with the determination of formaldehyde in environmental water samples. The proposed method is very simple, rapid, less expensive, and highly sensitive, and can be applied to the environmental water samples, such as rain, tap water and river water, at low concentration levels without any enrichment procedure.     

New highly strained bridgehead imines, 2-azaadamant-1-ene and 4-azaprotoadamant-3-ene

An azaanalog of adamantene, 2-azaadamant-1-ene ($\text{1}$) and 4-azaprotoadamant-3-ene ($\text{7}$) were generated in the nonstatistical ratio via photolysis of 3-azidonoradamantane ($\text{2}$). The highly strained $\text{1}$ and $\text{7}$ could not be isolable but were trapped by MeOH. Acidolysis of $\text{2}$ was also reported, and discussed in comparison with the photolysis.     

New gem-dicyanocyclobutane-containing hydroxyesters

Six new gem-dicyanocyclobutanes containing carbomethoxy and hydroxyl/acetoxy functions were synthesized by cycloaddition of the appropriate vinyl ethers or alkoxystyrenes to methyl β,β-dicyanoacrylate. They proved to be too thermally labile to allow polycondensation to potentially piezoelectric linear polyesters.     

Stereoselective synthesis of procyanidin B3-3-O-gallate and 3,3″-di-O-gallate, and their abilities as antioxidant and DNA polymerase inhibitor

A simple method for the synthesis of procyanidin B3 substituted with a galloyl group at the 3 and 3″ position is described. Condensation of a benzylated catechin-3-O-gallate electrophile with a nucleophile, catechin and catechin-3-O-gallate, proceeded smoothly and stereoselectively to afford the corresponding dimer gallates, procyanidin B3-3-O-gallate and procyanidin B3-3,3″-di-O-gallate, in good yields. Further, their antioxidant activities on UV-induced lipid peroxide formation, DPPH radical scavenging activity and inhibitory activity of DNA polymerase were also investigated. Among three procyanidin B3 congeners (procyanidin B3, 3-O-gallate and 3,3″-di-O-gallate), the 3,3″-di-O-gallate derivative showed the strongest antioxidant and radical scavenging activity. Interestingly, the 3-O-gallate derivative was the strongest inhibitor of mammalian DNA polymerase with IC₅₀ value of 0.26 μM, although it showed the weakest antioxidant and radical scavenging activity. It became apparent that the presence of a galloyl group at the C-3 position in the proanthocyanidin oligomer was very important for biological activity, however, the antioxidant activity of these compounds was not parallel to the DNA polymerase inhibitory activity.     

Effect of pressure on the thermotropic phase behavior of surfactant assemblies in water

The temperature (T)—pressure (P) phase diagrams of aqueous solutions of a homologous series of cationic surfactants, tetradecyl- (C14TAB), hexadecyl- (C16TAB), and octadecyltrimethylammonium bromide (C18TAB), have been determined by observing the sudden change of the transmittance accompanying the phase transition under high pressure up to 160 MPa. Regarding three kinds of phase transitions which have been previously assigned by the differential scanning calorimetry (DSC) (S. Kaneshina and M. Yamanaka, J. Colloid Interface Sci.131, 493, 1989), all the transition temperatures were linearly elevated by applying pressure. The volume changes associated with the transitions were estimated from the Clapeyron—Clausius equation by using the values of the T—P slopes on the phase diagrams and of the transition entropies taken from the DSC study. A chemical potential vs pressure profile, of which slope reflects the partial molar volume, among the states of surfactant assemblies, i.e., micelle, gel, and coagel, was drawn schematically on the basis of the transition volumes. The phase boundary between the coagel phase and the micellar solution should be the critical solution line of the surfactant, representing the pressure dependence on the Krafft temperature. In the C18TAB-water system, the phase boundary line between the metastable gel and the supercooled micelle had a break point at 45 MPa, suggesting the existence of a new pressure-induced mesophase above 45 MPa. The metastable gel phase of C14TAB disappeared in the pressure range up to 160 MPa.     

Functionalization of chitosan with 3-nitro-4-amino benzoic acid moiety and its application to the collection/concentration of molybdenum in environmental water samples

A chitosan resin functionalized with 3-nitro-4-amino benzoic acid moiety (CCTS-NABA resin) was newly synthesized for the collection/concentration of trace molybdenum by using cross-linked chitosan (CCTS) as base material. The carboxyl group of the moiety was chemically attached to amino group of cross-linked chitosan through amide bond formation. The adsorption behavior of molybdenum as well as other 60 elements on the resin was examined by passing the sample solutions through a mini-column packed with the resin. After the elution of the elements collected on the resin with 1 M HNO₃, the eluates were analyzed by inductively coupled plasma-mass spectrometry (ICP-MS) and atomic emission spectrometry (ICP-AES).

The CCTS-NABA resin can adsorb several metal ions, such as vanadium, gallium, arsenic, selenium, silver, bismuth, thorium, tungsten, tin, tellurium, copper, and molybdenum at appropriate pHs. Among these metal ions, only molybdenum could be adsorbed almost completely on the resin at acidic regions. An excellent selectivity toward molybdenum could be obtained at pH 3–4. The adsorption capacity of CCTS-NABA resin for Mo(VI) was 380 mg g⁻¹ resin. Through the column pretreatment, alkali and alkaline earth metals in river water and seawater samples were successfully removed.

The CCTS-NABA resin was applied to the adsorption/collection of molybdenum in river water and seawater samples. The concentrations of molybdenum in river water samples were found in the range of 0.84 and 0.95 ppb (ng g⁻¹), whereas molybdenum in seawater was about 9 ppb. The validation of the proposed method was carried out by determining molybdenum in the certified reference materials of SLRS-4, CASS-4, and NASS-5 after passing through the CCTS-NABA resin; the results showed good agreement with the certified values.