Decomposition behaviors of various crystalline celluloses as treated by semi-flow hot-compressed water

Various types of crystalline cellulose consisting of group I (cell I, III_I, IV_I) and group II (cell II, III_II, IV_II) prepared from cotton linter were adjusted for their degree of polymerization (DP) as starting materials. These celluloses were then treated by semi-flow hot-compressed water (HCW) at 230–270 °C/10 MPa/2–15 min to study their decomposition behaviors. The treatments performed resulted in residues of celluloses and water-soluble (WS) portions. Consequently, the crystallinity of the residues was found to remain the same, but the DP was reduced as the temperature increased. Additionally, X-ray diffractometry and Fourier transform-infrared analyses demonstrated that crystallographic changes occurred for residues of cell III_I, IV_I and III_II. Despite these changes, the overall results of the residues showed that group I has higher resistance to decomposing than group II. As for the WS portions, the yields of the hydrolyzed and degraded products were higher in group II than group I, indicating that group II is less resistant to decomposition by HCW treatment. Results for both the residues and WS portions are in agreement with each other, showing that the degree of difficulty of decomposition was higher in group I than group II. Therefore, the decomposition behaviors of the celluloses are due to differences in the crystalline forms.     

57Fe-Mössbauer study of electrically conductive alkaline iron vanadate glasses

A relationship between local structure, thermal stability and electrical conductivity (σ) of xR₂O·10Fe₂O₃·(90 ? x)V₂O₅ glasses (abbreviated as xRFV glasses, where R = Li, Na, K; x = 20 and 40 in mol %) was investigated by ⁵⁷Fe-Mössbauer spectroscopy, X-ray diffractometry, differential thermal analysis (DTA) and DC two- and four-probe method. From DTA study, thermal stability of 20RFV glasses is lower than that of 40RFV glasses by evaluating Hruby parameter (K _gl). Constant activation energy for crystallization (E _a) of 2.5 eV obtained from both 20RFV and 40RFV glasses indicate that the crystallization proceeds with the cleavage of Fe–O bond having the energy of 2.6 eV. Isochronally annealed 20RFV glass at 400–450 °C resulted in the increase in electrical conductivity (σ) from the order of 10^?3 to 10^?1 S cm^?1, whereas slight decrease in σ was observed for 20RFV glass annealed above 460 °C. A paramagnetic doublet with an identical isomer shift (δ) of 0.39 mm s^?1 was observed in the ⁵⁷Fe-Mössbauer spectra of 20RFV glass after isothermal annealing conducted at 400–450 °C for 100 min, which caused a decrease of quadruple splitting (Δ) from 0.67 to 0.52 mm s^?1 for 20LiFV glass and from 0.66 to 0.53 mm s^?1 for 20NaFV glass. On the other hand, three paramagnetic doublets with δ and Δ of 0.40 and 0.25, 0.38 and 0.60, and 0.31 and 1.11 mm s^?1 respectively were observed for 20RFV glass annealed at 460–550 °C, reflecting precipitation of semiconducting FeVO₄ phase having σ of 6.0 × 10^?7 S cm^?1. It can be concluded that isochronal annealing of 20RFV glass below 450 °C resulted in increase in σ due to the structural relaxation, while annealing above 500 °C resulted in the decrease of σ due to the precipitation of FeVO₄ phase.     

Sterically Demanding Unsymmetrical Diaryl-λ3-iodanes for Electrophilic Pentafluorophenylation and an Approach to α-Pentafluorophenyl Carbonyl Compounds with an All-Carbon Stereocenter

A sterically demanding unsymmetrical pentafluorophenyl-triisopropylphenyl-λ³-iodane was developed as an effective reagent for the electrophilic pentafluorophenylation of various β-keto esters and a β-keto amide. 17 examples of α-pentafluorophenylated 1,3-dicarbonyl compounds 3 having a quaternary carbon center are provided. The resulting compounds were nicely transformed into chiral α-pentafluorophenyl ketones with an all-carbon stereogenic center in high yields and high enantioselectivities using asymmetric organocatalysis (up to 98 % ee) or asymmetric metal catalysis (up to 82 % ee).     

Hardness and slip systems of orthorhombic hen egg-white lysozyme crystals

Hardness and slip systems by an indentation method were investigated on different habit planes of orthorhombic hen egg-white lysozyme (O-HEWL) crystals containing water. A dependence of the hardness on the water-evaporation time exhibits three stages as incubation, transition and saturated ones, as tetragonal (T)-HEWL crystals reported previously. The hardness values of (1 1 0), (0 1 0) and (0 1 1) habit planes of O-HEWL in the incubation stage or wet condition exhibits 6, 8 and 10 MPa, respectively. The hardness depends on indented planes but it is independent of the air-humidity and crystal volumes. These values correspond to the intrinsic hardness for O-HEWL crystals containing water. In the incubation stage, the slip traces are clearly observed around the indentation mark and the corresponding six kinds of slip systems are identified to be {0 1 1}<1 0 0>, {1 1 0}<1 1 0>, {0 1 1}<0 1 1>, {1 1 0}<0 0 1>, {1 0 0}<0 0 1> and {0 1 0}<0 0 1>.     

Solvent-Vapor-Induced Reversible Single-Crystal-to-Single-Crystal Transformation of a Triphosphaazatriangulene-Based Metal–Organic Framework

A triphosphaazatriangulene (H₃L) was synthesized through an intramolecular triple phospha-Friedel–Crafts reaction. The H₃L triangulene contains three phosphinate groups and an extended π-conjugated framework, which enables the stimuli-responsive reversible transformation of [Cu(HL)(DMSO)⋅(MeOH)]_n, a 3D-MOF that exhibits reversible sorption characteristics, into (H₃L⋅0.5 [Cu₂(OH)₄⋅6 H₂O] ⋅4 H₂O), a 1D-columnar assembled proton-conducting material. The hydrophilic nature of the latter resulted in a proton conductivity of 5.5×10⁻³ S cm⁻¹ at 95 % relative humidity and 60 °C.     

Relativistic correlating basis sets for 57La and 89Ac

Developed and reported are compact yet efficient correlating basis sets for the ₅₇La and ₈₉Ac atoms, missing in the literature. Good performance of these correlating sets is exemplified in molecular applications to diatomic oxides and fluorides. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2010     

A comparative study on chemical conversion of cellulose between the batch-type and flow-type systems in supercritical water

Microcrystalline cellulose (avicel) was treated in supercritical waterusing batch-type and flow-type systems. The flow-type system made it possibletoshorten the heating, treating and cooling times, compared with the batch-typesystem. As a result, the flow-type system was able to liquefy avicel withoutproducing any supercritical water-insoluble residue. Although hydrolyzedproducts such as glucose and fructose, and pyrolyzed products such aslevoglucosan, 5-hydroxymethyl furfural, erythrose, methylglyoxal,glycolaldehydeand dihydroxyacetone were found in common from the water-soluble portiontreatedby both systems, the flow-type system gave a water-soluble portion with morehydrolyzed and less pyrolyzed products, together with water-solubleoligosaccharides consisting of cellobiose to cellododecaose and theirdecomposedproducts at their reducing end of glucose, such as[–glucopyranosyl]_1–11 –levoglucosan,[–glucopyranosyl]_1–11 –erythrose and[–glucopyranosyl]_1–11 –glycolaldehyde. Inaddition, the precipitates of polysaccharides were recovered after 12h setting of the water-soluble portion. These results indicatedthat the flow-type system can hydrolyze cellulose with minimizing pyrolyzedproducts. On the other hand, the batch-type system resulted in a higher yieldof the pyrolyzed products due to the longer treatment, but a higher yield ofglucose due possibly to the higher pressure and concomitantly higher ionicproduct of water. Based on these lines of evidence, the process to increase theyield of the sugar is discussed under supercritical water treatment.     

Metallic conductivity and ferromagnetic interaction of iron(III) d spins in the needle crystals of (ethylenedithiotetrathiafulvalenoquinone-1,3-dithiolemethide)(2).FeBr(4) salt

The 2:1 charge-transfer (CT) salts (1(2).FeBr(4) and 1(2).GaBr(4)) of ethylenedithiotetrathiafulvalenoquinone-1,3-dithiolemethide (1) with FeBr(4)(-) and GaBr(4)(-) counteranions were obtained as needle crystals, whose structures are almost the same as each other. The 1 molecules form a one dimensionally stacked column with alternation of their molecular axis direction, while the counteranions are aligned in parallel with the 1-stacked columns with the direction of their distorted-tetrahedral geometry maintained. The room-temperature electrical conductivities measured on the single crystals of 1(2).FeBr(4) and 1(2).GaBr(4) were 4.6 and 2.1 S cm(-1), respectively. From the temperature dependences of their electrical conductivities in both cases the electrical conducting properties were metallic between ca. 170 and 300 K, but below ca. 170 K converted to be semiconducting and continued till 5 K, although the activation energies are very small (4-10 meV). For 1(2).FeBr(4) very weak and antiferromagnetic interaction occurred between the d spins of FeBr(4)(-) ions in the temperature range of ca. 1-300 K. However, below ca. 15 K the ferromagnetic interaction was reversely preferential possibly by participation of the pi spin of 1.     

An assembled complex of palladium and non-cross-linked amphiphilic polymer: a highly active and recyclable catalyst for the Suzuki-Miyaura reaction

An insoluble and assembled catalyst of palladium and a non-cross-linked amphiphilic polymer were developed. In the presence of 50-500 ppm mol equiv of catalyst, the Suzuki-Miyaura reaction proceeded efficiently under organic solvent-free conditions. The catalyst was reused 10 times without any decrease in activity and was recycled without any special treatment.[structure: see text]