Redoxable nanosheet crystallites of MnO2 derived via delamination of a layered manganese oxide

This paper reports on the swelling and exfoliation behavior of a layered protonic manganese oxide, H(0.13)MnO(2).0.7H(2)O, in a solution of tetrabutylammonium (TBA) hydroxide and the formation and characterizations of unilamellar two-dimensional crystallites of MnO(2). At low doses of TBA ions, layered manganese oxide was observed to undergo normal intercalation, yielding a TBA intercalated phase with a gallery height of 1.25 nm. With a large excess of TBA ions, osmotic swelling occurred, giving rise to a very large intersheet separation of 3.5-7 nm. In an intermediate TBA concentration range, the sample exhibited a broad X-ray diffraction profile with superimposed diffraction features due to intercalation and osmotic swelling. The component responsible for the broad profile was isolated by centrifuging the mixture twice at different speeds, and the recovered colloid was identified as a pile of MnO(2) nanosheets, corresponding to the individual host layer of the precursor layered manganese oxide. Observations by transmission electron microscopy and atomic force microscopy revealed high two-dimensional anisotropy with a lateral dimension of submicrometers and a thickness of approximately 0.8 nm. The nanosheet exhibited broad optical absorption with a peak at 374 nm (epsilon = 1.13 x 10(4) mol(-1) dm(3) cm(-1)). The restacking process of the colloidal MnO(2) nanosheets was followed by aging the colloid at a relative humidity of 95%. The broad diffraction pattern due to the exfoliated sheets weakened with time and eventually resolved into two sharp distinct profiles attributable to a TBA intercalation compound with an intersheet spacing of 1.72 nm and an osmotically swollen hydrate with >10 nm at a very early stage. As drying progressed, the former phase became more abundant without a change in interlayer distance, while the degree of swelling of the latter phase gradually decreased to 2.7 nm that remained unchanged on further aging. Subsequent drying at a lower humidity collapsed the 2.7 nm phase. The resulting single 1.72 nm phase was dehydrated by heating at 150 degrees C to produce a phase with a contracted interlayer spacing of 1.3 nm.     

The reactions of beta- and alpha-pyranose peracetates with PCl5, and utilization of the products to construct sarsasapogenin glycosides.

The reactions of beta- and alpha-pyranose peracetates with PCl5 gave products regioselectively chlorinated. The reactions of 1,2,3,4,6-penta-O-acetyl-beta-D-glucopyranose (5) and -beta-D-galactopyranose (6) with PCl5 in CCl4 and that of methyl 2,3,4-tri-O-acetyl-beta-D-glucuronatopyranose (7) with PCl5 in toluene gave 2-O-trichloroacetyl-beta-D-pyranosyl chlorides 4, 12 and 14, respectively, as major products, and alpha-D-pyranosyl chlorides 11, 13 and 15, respectively, as minor products. On the other hand, the reactions of compounds 8 and 9 which were alpha-anomers of 5 and 6, respectively, with PCl5 gave as major products transformed acetyl groups at C-6 to -C(Cl) = CCl2 or -C(Cl)2-CCl3 group (16 and 17 from 8 and 18 from 9). The same reaction of 10, which was alpha-anomer of 7, gave alpha-chloride 15 as a major product. The glycosidation of sugar derivative 4 with sarsasapogenin 23 gave beta-glycoside 24 (29.1%) and alpha-glycoside 25 (46.9%), and that of 12 with 23 gave beta-glycoside 26 (24.0%) and alpha-glycoside 27 (40.8%). The improvement of the yields of beta-glycosides 24 and 26 (66.9 and 62.1% for 24 and 26, respectively) in the glycosidations were accomplished by the employment of alpha-bromides 28 and 29 obtained from 4 and 6, respectively. The glycosidations of monoglycosides 30 and 31 obtained by the treatment 24 and 26, respectively, with ammonia-saturated ether with sugar acetate bromides 32 and 34 gave diglycoside derivatives 35 and 33, respectively.     

Mass spectrometric studies on gibberellins

Based on the element maps of twenty-two gibberellin methyl esters fragmentations are discussed, which are characteristic of the common structural features as well as structural modification in gibberellin homologues.     

A first photochemical bis-germylation of C60 with digermirane

[reaction: see text]In the photochemical bis-germylation of C60 with 1,1,2,2-tetrakis(2,6-diethylphenyl)-1,2-digermirane (1), a cycloadduct (2) is obtained in high yield for the first time. Spectroscopic analysis and theoretical investigation confirm that 2 (which has C1 symmetry) results from 1,4-cycloaddition. Control experiments and laser flash photolysis experiments suggest that an exciplex intermediate is responsible for the formation of 2. The redox properties of 2 were examined by differential pulse voltammetry.     

Validation of the CALUX bioassay for the screening of PCDD/Fs and dioxin-like PCBs in retail fish

The chemical-activated luciferase expression (CALUX) assay is a reporter gene assay that detects dioxin-like compounds based on their ability to activate the aryl hydrocarbon receptor (AhR) and thus expression of the reporter gene. In this paper, the CALUX assay was examined for its application in the screening of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (dioxin-like PCBs) in retail fish. The sample extracts were cleaned up on a sulfuric acid-silica gel column followed by an activated carbon column, and the AhR activity of the separated PCDD/F and dioxin-like PCB fractions was determined using the assay. The quantitative limit for 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8-TCDD) was 0.98 pg ml(-1) (0.19 pg assay(-1) in the standard curve, corresponding to 0.16 pg g(-1) of CALUX-based toxic equivalency (2,3,7,8-TCDD equivalents) in the tested sample. Recovery tests in which dioxins were added to fish samples resulted in acceptable recoveries (77-117%). The CALUX assay performed well in the analysis of dioxins in fish samples and a comparative study revealed a strong correlation between the CALUX assay and high-resolution gas chromatography-high-resolution mass spectrometry analysis for the determination of PCDD/Fs (r = 0.89) and dioxin-like PCBs (r = 0.91) in retail fish (n = 22). These data revealed that the CALUX assay would be a useful screening method for PCDD/Fs and dioxin-like PCBs in retail fish.     

Protein identification by peptide mass fingerprinting and peptide sequence tagging with alternating scans of nano-liquid chromatography/infrared multiphoton dissociation Fourier transform ion cyclotron resonance mass spectrometry

We have developed a method for protein identification with peptide mass fingerprinting and sequence tagging using nano liquid chromatography (LC)/Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). To achieve greater sensitivity, a nanoelectrospray (nano-ES) needle packed with reversed-phase medium was used and connected to the nano-ES ion source of the FTICR mass spectrometer. To obtain peptide sequence tag information, infrared multiphoton dissociation (IRMPD) was carried out in nano-LC/FTICR-MS analysis. The analysis involves alternating nano-ES/FTICR-MS and nano-ES/IRMPD-FTICR-MS scans during a single LC run, which provides sets of parent and fragment ion masses of the proteolytic digest. The utility of this alternating-scan nano-LC/IRMPD-FTICR-MS approach was evaluated by using bovine serum albumin as a standard protein. We applied this approach to the protein identification of rat liver diacetyl-reducing enzyme. It was demonstrated that this enzyme was correctly identified as 3-alpha-hydroxysteroid dehydrogenase by the alternating-scan nano-LC/IRMPD-FTICR-MS approach with accurate peptide mass fingerprinting and peptide sequence tagging.     

Rate Coefficient for Self-Association Reaction of CF2 Radicals Determined in the Afterglowof Low-Pressure C4F8 Plasmas

We have analyzed decay kinetics of CF₂ radicals in the afterglow of low-pressure, high-density C₄F₈ plasmas. The decay curve of CF₂ density has been approximated by the combination of first- and second-order kinetics. The surface loss probability evaluated from the frequency of the first-order decay process has been on the order of 10^–4. This small surface loss probability has enabled us to observe the second-order decay process. The mechanism of the second-order decay is self-association reaction between CF₂ radicals (CF₂+CF₂C₂F₄). The rate coefficient for this reaction has been evaluated as (2.6–5.3)×10^–14 cm³/s under gas pressures of 2 to 100 mTorr. The rate coefficient was found to be almost independent of the gas pressure and has been in close agreement with known values, which are determined in high gas pressures above 1 Torr.