High-performance liquid chromatographic determination of (S)-(-)-ofloxacin and its metabolites in serum and urine using a solid-phase clean-up

A sensitive and selective method for the simultaneous determination of (S)-(-)-ofloxacin [(S)-(-)-OFLX] and its metabolites in serum and urine was developed using isocratic high-performance liquid chromatography with a specific solid-phase extraction procedure. (S)-(-)-OFLX and its metabolites, desmethyl-(S)-(-)-OFLX and (S)-(-)-OFLX N-oxide, were eluted from a C8 solid-phase column with recoveries of more than 98%. These compounds were separated and determined by means of a reversed-phase column with fluorimetric detection. Validation studies showed that the results were linear for (S)-(-)-OFLX in serum over the range 10-1200 ng/ml and in urine over the range 1-200 micrograms/ml. Analysis for (S)-(-)-OFLX and its metabolites showed good precision and accuracy with a relative standard deviation of less than 6%.     

Aerobic oxidation of 1,3,5-triisopropylbenzene using N-hydroxyphthalimide (NHPI) as key catalyst

The first systematic study on the aerobic oxidation of 1,3,5-triisopropylbenzene was examined by the use of N-hydroxyphthalimide (NHPI) as a key catalyst. It was found that 1,3,5-triisopropylbenzene was efficiently oxidized with O₂ in the presence of a catalytic amount of NHPI and azobisisobutyronitrile (AIBN) at 75 °C. Upon treatment of the resulting products with sulfuric acid followed by acetic anhydride led to 5-acetoxy-1,3-diisopropylbenzene and 3,5-diacetoxy-1-isopropylbenzene as major products and a small amount of 1,3,5-triacetoxybenzene. When t-butylperoxypivalate (BPP) was employed as a radical initiator, the oxidation could be achieved in good yield even at 50 °C. This oxidation provides a facile method for preparing phenol derivatives bearing an isopropyl moiety, which can be used as pharmaceutical starting materials.     

Molecular metamagnet [Ni(4ImNNH)(2)(NO(3))(2)] (4ImNNH = 4-imidazolyl nitronyl nitroxide) and the related compounds showing supramolecular H-bonding interactions

A new chelating radical ligand 4ImNNH (2-(4-imidazolyl)-4,4,5,5-tetramethylimidazolin-1-oxyl 3-oxide) was prepared, and complexation with divalent transition metal salts gave complexes, [M(4ImNNH)(2)X(2)], which showed intermolecular ferromagnetic interaction in high probability (7 out of 10 paramagnetic compounds investigated here). The nitrate complexes (X = NO(3); M = Mn (1), Co (2), Ni (3), Cu (4)) crystallize isomorphously in monoclinic space group P2(1)/a. The equatorial positions are occupied with two 4ImNNH chelates and the nitrate oxygen atoms are located at the axial positions. Magnetic measurements revealed that the intramolecular exchange couplings in 1, 2, and 4 were antiferromagnetic, while that in 3 was ferromagnetic with 2J/k(B) = +85 K, where the spin Hamiltonian is defined as H = -2J(S(1).S(2) + S(2).S(3)) based on the molecular structures determined as the linear radical-metal-radical triads. The intramolecular ferromagnetic interaction in 3 is interpreted in terms of orthogonality between the radical pi and metal dsigma orbitals. Compounds 1-3 exhibited intermolecular ferromagnetic interaction ascribable to a two-dimensional hydrogen bond network parallel to the crystallographic ab plane. Complex 3 became an antiferromagnet below 3.4 K and exhibited a metamagnetic transition on applying a magnetic field of 5.5 kOe at 1.8 K. The complexes prepared from metal halides, [M(4ImNNH)(2)X(2)] (X = Cl, Br; M = Mn, Co, Ni, Cu), showed intramolecular antiferromagnetic interactions, which are successfully analyzed based on the radical-metal-radical system. The crystal structures determined here on 1-4, [Mn(4ImNNH)(2)Cl(2)], and [Cu(4ImNNH)(2)Br(2)] always have intermolecular hydrogen bonds of H(imidazole).X(axial ligand)-M, where X = NO(3), Cl, Br. This interaction seems to play an important role in molecular packing and presumably also in magnetic coupling.     

Infrared spectra of the water-nitrogen complexes (H2O)2-(N2)n(n = 1-4) in argon matrices

The infrared spectra of the water-nitrogen complexes trapped in argon matrices have been studied with Fourier transform infrared absorption spectroscopy. The absorption lines of the H20-N2 1:1, 1:2, 1:n, and 2:1 complexes have been confirmed on the basis of the concentration effects. In addition, we have observed a few lines and propose the assignments for the 2:2, 2:3, and 2:4 complexes in the nu1 symmetric stretching and nu2 bending regions of the proton-acceptor molecule, and in the bonded OH stretching region of the proton-donor molecule. The redshifts in the bonded OH stretching mode and blueshifts in the OH bending mode suggest that the hydrogen bonds in the (H2O)2-(N2)n complexes with n = 1-4 are strengthened by the cooperative effects compared to the pure H2O dimer. Two absorption bands due to the 3:n complexes are also observed near the bonded OH stretching region of the H2O trimer.     

Fabrication of polymer Langmuir-Blodgett films containing regioregular poly(3-hexylthiophene) for application to field-effect transistor

Semiconducting thin films consisting of regioregular poly(3-hexylthiophene) (RR-PHT) and poly(N-dodecylacrylamide) (pDDA) were constructed by the Langmuir-Blodgett (LB) technique. A mixture of RR-PHT and pDDA spread from a chloroform solution on a water surface forms a stable monolayer, which can be transferred onto solid substrates by the LB method, yielding a well-defined polymer LB film. Surface morphology studies of the LB film indicate that the RR-PHT is dispersed uniformly throughout the surface. The polymer thin film was chemically doped by contacting with FeCl3 acetonitrile solution, and a conductivity of 5.6 S/cm was achieved. Further, the LB film was utilized as the semiconducting film in the field-effect transistor (FET), and mobilities of 2.2 x 10(-4) and 4.4 x 10(-4) cm2 V(-1) s(-1) were obtained by analyzing the saturated and linear regions of the current-voltage characteristic, respectively.     

Surface treatment of silicon carbide using TiO2(IV) photocatalyst

Silicon carbide (SiC) and diamond were decomposed to CO(2)(g) by the photocatalysis with TiO(2) at room temperature, although the decomposition rate of diamond was very slow. According to the XPS spectra of Si2p on the SiC surface, SiO(2) was simultaneously formed on the surface by the TiO(2) photocatalysis. The thickness of the SiO(2) formed on the SiC surface during the photocatalytic oxidation for 1 h was estimated to be about 40 A from the depth profile of the XPS spectra using Ar etching. The SiC surface was oxidized by the TiO(2) photocatalysis even under the condition without a direct contact with the TiO(2). This indicates that the photocatalytic oxidation of the SiC occurs due to active oxygen species photogenerated on the TiO(2) surface, but not by hole produced in the valence band of the TiO(2). Moreover, a remote surface treatment system using the quartz beads coated with TiO(2) was developed for the SiC surface oxidation. Consequently, the TiO(2) photocatalysis will be very useful for the surface treatment of SiC such as photopatterning without defects and damage to the substrate because the photocatalytic reaction is carried out under mild conditions.     

High-molecular-weight poly(p-phenyleneterephthalamide) by the direct polycondensation reaction with triphenyl phosphite

Poly(p-phenyleneterephthalamide) of high molecular weight was obtained when the polycondensation of terephthalic acid and p-phenylenediamine was carried out in N-methylpyrrolidone (NMP) that contained dissolved CaCl₂ and LiCl in the presence of pyridine. The molecular weight of the polymer obtained varied with the amount of pyridine relative to the metal salts and with the molar ratios of CaCl₂ to LiCl, the maximum η_inh value of 4.5 being obtained under the conditions Py/(CaCl₂ + LiCl) ≈ 2.5 (mol/mol), CaCl₂/LiCl ≈ 1.2 (mol/mol), and LiCl + CaCl₂ ≈ 4 g. Among the solvents tested, NMP was significantly effective for the reaction. Polycondensations of several combinations of other dicarboxylic acids and diamines were carried out with limited success.     

Molecular numbers in core and shell: structural dependence of reactivity of alkylcarboxylate-stabilized silver nanoparticles

Spectroscopic, chemical, thermal, and voltammetric analyses on six kinds of alkylcarboxylate-stabilized silver nanoparticles 4.7 nm in diameter were carried out with an aim to reveal the effect of alkylcarboxylates on the optical, thermal, geometric, and electrochemical properties of the nanoparticles. These nanoparticles are composed of silver atoms and silver alkylcarboxylates having even numbers, m, of carbon atoms from 8 to 18. As a measure of the structure of the nanoparticles, the ratio of the number of silver atoms (nAg) to that of alkylcarboxylates (ns) per nanoparticle was evaluated by means of titration through chemical oxidation, voltammetric currents, and thermal gravimetric analysis. It increased with an increase in m and ranged from 1.3 to 9.8. Properties of the nanoparticle have been exhibited in absorbance of the UV-vis spectra at the point of the proportionality to n(Ag), voltammetric currents of which values were close to the theoretical values at the diffusion of particle itself, and the m-independent kinetic energy of the thermal decomposition and the overpotential of the reduction. They are not observed for the composed species, that is, silver atoms and silver alkylcarboxylate molecules.     

Site-selective photocycloadditions of 2-pyrones with electron-poor olefins and the derivation from the cycloadducts

Photosensitized cycloaddition of 4,6-dimethyl-2-pyrone ( 1 ) with methacrylonitrile ( 3b ) afforded two types of [2 + 2]cycloadducts, 4b and 6b , across the C₅-C₆ and C₃-C₄ double bonds in 1 , respectively. Photosensitized reactions of 1 with dimethyl maleate and dimethyl cyclobutene-1,2-dicarboxylate gave [2 + 2]cycload-ducts 4d, 4e across the C₅-C₆ double bond, in addition to [4 + 2]cycloadduct 9d or bicyclo[4.2.0]octadiene 10e . The photoreactions of methyl 2-pyrone-5-carboxylate ( 2 ) with 3b and 2-chloroacrylonitrile ( 3c ) gave [4 + 2]cycloadducts 5b, 5c in addition to [2 + 2]cycloadducts 11b and 11c across the C₅-C₆ double bond in 2 . The photocycloaddition mechanism was explained from results calculated by means of PM3-CI method. Namely, the site- and/or regio-selective products, 4, 5, 8, 9 and 10 were thought to come from the same site-selective radical intermediates in the case of electron-poor olefins. Pyrolysis and/or hydrolysis of the cycload-ducts 4e, 5b, 5c gave 5,6-dihydro-2-pyrone 12 or benzene derivatives.     

Synthesis of enantiopure 1,2-diamine attached to cross-linked polystyrene and its application to an insoluble catalyst for asymmetric hydrogenation

A novel enantiopure 1,2-diamine (5) having two phenolic hydroxy groups was attached into chloromethylated polystyrene through benzyl ether linkage, which was used as a chiral ligand of the catalyst in asymmetric hydrogenation of acetophenone.