Photoinduced [4?+?2] cycloaddition reactions of benzo[b]thiophene-2,3-dione with alkenes

[4?+?2]-Photocycloadditions of benzo[b]thiophene-2,3-dione with electron-rich and electron-deficient alkenes have been described. Olefins preferentially add at both carbonyl groups to give the head-to-head [4?+?2] cycloadducts, i.e., dioxanes only. Comprehensive molecular orbital calculations at DFT-B3LYP level have been carried out to address the mechanism as well as regiochemical course of the reaction.     

La(OTf)3-catalyzed one-pot synthesis of meso-substituted porphyrinic thiazolidinones

Abstract  

An improved synthetic procedure is developed for the regioselective nitration of a phenyl group of meso-tetraphenylporphyrin by using NaNO₂ in a mixture of trichloroacetic acid and AcOH. The meso-(4-nitrophenyl)porphyrins are successfully reduced to corresponding meso-(4-aminophenyl)porphyrins by SnCl₂ under acidic conditions. In addition, an efficient one-pot methodology for synthesizing a series of novel meso-substituted porphyrinic thiazolidinone conjugates is developed by reacting meso-(4-aminophenyl)porphyrins with various aromatic aldehydes and mercaptoacetic acid in refluxing toluene using La(OTf)₃ as a catalyst. The products obtained are characterized on the basis of their spectral data. Preliminary photophysical properties of the newly synthesized compounds are reported.     

Investigation of folding patterns in homo-oligomers of (R)-β2,2-amino acids with carbohydrate side chain

The study describes the synthesis of new β^2,2-peptides made from geminally disubstituted β^2,2-amino acid and their folding propensities. The (R)-C-linked carbo-β^2,2-amino acid [(R)-β^2,2-Caa] was prepared from d-glucose and converted into the homo-oligomeric di-, tetra-, and hexapeptides. The conformational studies were carried out using NMR (in CDCl₃), CD, IR, and MD calculations. These β^2,2-peptides were interestingly stabilized by five-membered (mr) inter-residue H-bonds NH(i)?O(i-1) (furanoside) and a 6-mr intra-residue H-bond between amide proton (NH(i)) and the oxygen of –OMe(i) at the C3 carbon of the carbohydrate side chain. These results amply demonstrate that the ‘epimerization’ at the spiro carbon center has an effect on the conformational behavior of these peptides. Finding of these, H-bonding patterns, which are not so common to stabilize the folds in this class of β^2,2-Caa derived peptides would further facilitate augmentation in the domain of foldamer.     

Solid supported palladium(0) nano/microparticle: a ligand-free efficient recyclable heterogeneous catalyst for mono- and β,β-double-Heck reaction

Solid supported palladium nano/microparticles were found to be active catalysts to perform mono- and β,β-double-Heck reactions. Different β-unsubstituted and substituted alkenes including acrylate, methacrylate, crotonate, styrene, acrylonitrile, and acrylamide were investigated successfully for mono- and β,β-double-Heck reactions with aryl iodide under milder reaction condition. One-pot β,β-double-Heck reaction of aryl iodides with α,β-unsaturated ester, amide, nitrile, and styrene derivatives were also performed under standard reaction conditions. Wide functional group tolerance, easy catalyst recovery, and recyclability up to twelve times without significant loss of catalytic activity added extra importance to the present process.     

A generalization of K-contact and (k, μ)-contact manifolds

We study a generalization of K-contact and (k, μ)-contact manifolds, and show that if such manifolds of dimensions ≥ 5 are conformally flat, then they have constant curvature +1. We also show under certain conditions that such manifolds admitting a non-homothetic closed conformal vector field are isometric to a unit sphere. Finally, we show that such manifolds with parallel Ricci tensor are either Einstein, or of zero ${\xi}$ -sectional curvature.     

Thermoluminescence response in gamma and UV irradiated Dy2O3 nanophosphor

Low temperature solution combustion method was employed to synthesize Dy₂O₃ nanophosphors using two different fuels (sugar and oxalyl dihydrazine (ODH)). Powder X-ray diffraction confirm pure cubic phase and the estimated particle size from Scherrer's method in sugar and ODH fuel was found to be 26 and 78 nm, respectively, and are in close agreement with those obtained using TEM and W–H plot analysis. SEM micrographs reveal porous, irregular shaped particles with large agglomeration in both the fuels. An optical band gap of 5.24 eV and 5.46 eV was observed for Dy₂O₃ for sugar and ODH fuels, respectively. The blueshift observed in sugar fuel is attributed to the particles size effect. Thermoluminescence (TL) response of cubic Dy₂O₃ nanophosphors prepared by both fuels was examined using gamma and UV radiations. The thermoluminescence of sugar used samples shows a single glow peak at 377 °C for 1–4 kGy gamma irradiations. When dose is increased to 5 kGy, two more shouldered peaks were observed at 245 and 310 °C. However, in TL of ODH used samples, a single glow peak at 376 °C was observed. It is observed that TL intensity is found to be more in sugar used samples. In UV irradiated samples a single glow peak at 365 °C was recorded in both the fuels with a little variation in TL intensity. The trapping parameters were estimated by different methods and the results are discussed.     

Analysis of surface and guided wave plasmon polariton modes in insulator–metal–insulator planar plasmonic waveguides

Theoretical and experimental study of the surface plasmon–polariton and guided wave plasmon polariton modes is presented for the Sapphire/Ag/Polycarbonate/Air structure. Theoretical results are obtained by solving complex multilayer eigenvalue equations as well as the reflectivity equation for this structure. It is proposed that the mode attenuation can be significantly reduced by inserting a low index dielectric buffer between the metal and the guiding dielectric layer. The dispersion and attenuation curves are generated. Both the surface plasmon and guided wave plasmon polariton modes are studied experimentally. The experimental values of the effective refractive indices agree well with the theoretical values. The electric field profiles are generated and used to examine the nature of modes. After optimization of various parameters the condition for low loss single mode guiding is obtained for the proposed structure. Effect of metal thickness on surface plasmon mode is also discussed. It is inferred that in a properly optimized plasmonic waveguide, the losses can be reduced by a factor of 4.     

Selenadiazolopyridine: a synthon for supramolecular assembly and complexes with metallophilic interactions

The synthesis and characterization of the complexes of Cu(I), Ag(I), Cu(II), and Co(II) ions with 1,2,5-selenadiazolopyridine (psd) is reported. The following complexes have been prepared: [Cu(2)(psd)(3)(CH(3)CN)(2)](2+)2(PF(6)(-)); [(CuCl)(2)(psd)(3)]; [Cu(2)(psd)(6)](2+)2(ClO(4))(-); [Ag(2)(psd)(2)](2+)2(NO(3))(-); [Ag(2)(psd)(2)](2+)2(CF(3)COO)(-); [Cu(psd)(2)(H(2)O)(3)](2+)2(ClO(4))(-)·(psd)(2); [Cu(psd)(4)(H(2)O)](2+)2(ClO(4))(-)·(CHCl(3)); [Cu(psd)(2)(H(2)O)(3)](2+)2(NO(3))(-)·(H(2)O)·(psd)(2), and [Co(psd)(2)(H(2)O)(4)](2+)2(ClO(4))(-)·(psd)(2). The electronic structure of ligand psd, in particular the bond order of Se-N bonds, has been probed by X-ray diffraction, (77)Se NMR, and computational studies. A detailed analysis of the crystal structures of the ligand and the complexes revealed interesting supramolecular assembly. The assembly was further facilitated by the presence of neutral ligands for some complexes (Cu(II) and Co(II)). The molecular structure of the ligand showed that it was present as a dimer in the solid state where the monomers were linked by strong secondary bonding Se···N interactions. The crystal structures of Cu(I) and Ag(I) complexes revealed the dinuclear nature with characteristic metallophilic interactions [M···M] (M = Cu, Ag), while the Cu(II) and Co(II) complexes were mononuclear. The presence of M···M interactions has been further probed by Atoms in Molecules (AIM) calculations. The paramagnetic Cu(II) and Co(II) complexes have been characterized by UV-vis, ESI spectroscopy, and room temperature magnetic measurements.     

Spin-adapted density matrix renormalization group algorithms for quantum chemistry

We extend the spin-adapted density matrix renormalization group (DMRG) algorithm of McCulloch and Gulacsi [Europhys. Lett. 57, 852 (2002)] to quantum chemical Hamiltonians. This involves using a quasi-density matrix, to ensure that the renormalized DMRG states are eigenfunctions of S?(2), and the Wigner-Eckart theorem, to reduce overall storage and computational costs. We argue that the spin-adapted DMRG algorithm is most advantageous for low spin states. Consequently, we also implement a singlet-embedding strategy due to Tatsuaki [Phys. Rev. E 61, 3199 (2000)] where we target high spin states as a component of a larger fictitious singlet system. Finally, we present an efficient algorithm to calculate one- and two-body reduced density matrices from the spin-adapted wavefunctions. We evaluate our developments with benchmark calculations on transition metal system active space models. These include the Fe(2)S(2), [Fe(2)S(2)(SCH(3))(4)](2-), and Cr(2) systems. In the case of Fe(2)S(2), the spin-ladder spacing is on the microHartree scale, and here we show that we can target such very closely spaced states. In [Fe(2)S(2)(SCH(3))(4)](2-), we calculate particle and spin correlation functions, to examine the role of sulfur bridging orbitals in the electronic structure. In Cr(2) we demonstrate that spin-adaptation with the Wigner-Eckart theorem and using singlet embedding can yield up to an order of magnitude increase in computational efficiency. Overall, these calculations demonstrate the potential of using spin-adaptation to extend the range of DMRG calculations in complex transition metal problems.