4,4′‐Bipyridyl N,N′‐dioxide–3‐hydroxy‐2‐naphthoic acid (1/2)

4,4′‐Bipyridyl N,N′‐dioxide crystallizes with 3‐hydr­oxy‐2‐naphthoic acid to give a centrosymmetric three‐component adduct, C₁₀H₈N₂O₂·2C₁₁H₈O₃, which is engineered into a two‐dimensional layer structure by two kinds of π–π inter­actions. Weak C—H⋯O inter­actions further link the two‐dimensional structure into a three‐dimensional structure.     

温度及pH值敏感水凝胶的合成和应用

直接将丙烯酸单体与N-异丙基丙烯酸胺共聚交联合成了温度及pH值敏感的水凝胶。包埋于水凝胶中的药物的释放随温度升高和pH值增大而加快，药物的释放兼有温度和pH值敏感性，对pH值的响应更加显著。     

Preconcentration of trace elements from natural water with palladium precipitation

Palladium salts can be used as a coprecipitation carrier for the preconcentration of trace elements from natural water prior to their measurement by atomic spectrometry (AAS). The palladium is subsequently reduced by the introduction of hydrogen gas into the sample solution. The procedure is applied to the determination of Cu, Pb and Cd in seawater (enrichment factor 50) and synthetic water samples. Operating conditions have been optimized for the analysis of real samples. With the technique established an enrichment factor (500 fold) is feasible in synthetic samples. The recoveries of Cu, Cd and Pb from seawater are 95, 103 and 100%, respectively. This simple and rapid method can be applied in a wide pH-range and with complex matrices.     

脱氧核糖核酸电分析化学研究进展

就DNA电分析化学研究及其应用方面进行综述，主要叙述了DNA的各种电分析化学方法，以及DNA电化学传感器的原理，应用以及发展，本文引用文献77篇。     

Extraction Kinetics of Rare Earth Elements with sec—Octyl—phenoxy Acetic Acid

ＩｎｔｒｏｄｕｃｔｉｏｎＩｔｉｓｗｅｌｌｋｎｏｗｎｔｈａｔｙｔｔｒｉｕｍｃａｎｂｅｕｓｅｄｉｎｍａｎｙｆｉｅｌｄｓ ,ｓｕｃｈａｓｍｅｔａｌｌｕｒｇｙ ,ｃｅｒａｍｉｃｓ ,ｌａｓｅｒｓａｎｄｅｌｅｃｔｒｏｎ ｉｃｓ ,ｅｓｐｅｃｉａｌｌｙｉｎｆｌｕｏｒｅｓｃｅｎｔｍａｔｅｒｉａｌｓｗｈｏｓｅｎｅｅｄｆｏｒｈｉｇｈｐｕｒｉｔｙｙｔｔｒｉｕｍｏｘｉｄｅｉｓｉｎｃｒｅａｓｉｎｇ .ＩｎＣｈｉｎａ ,ｔｈｅｒｅ ｓｏｕｒｃｅｏｆｙｔｔｒｉｕｍｉｓｒｉｃｈ ,ａｎｄｔｈｅｈｉｇｈｐｕｒｅｙｔｔｒｉｕｍｉｓｂｅ ｉｎｇｏ…     

EPO检测技术的研究进展

促红细胞生成素（EPO）是一种临床上广泛应用的重要药物，也是近年来兴奋剂检测的热点。本文主要从EPO的产生和应用出发，对EPO的结构、特性及其检测方法进行了介绍及评价，重点探讨了竞技体育中EPO的检测技术，并对检测前景作了展望。     

用红外光谱法对热固性酚醛树脂固化过程的研究

用红外光谱法研究了四种热固性酚醛树脂在固化过程中的化学变化。结果表明热固性酚醛树脂的固化过程,首先是羟甲基发生缩合反应,缩合反应形成醚键是主要的。热固性酚醛树脂在进一步固化时(150—200°)出现了羰基,它的出现不是亚甲基氧化所致,而是部分醚键断裂形成了醛羰基。对热固性酚醛树脂的固化过程的机理进行了讨论。     

Phenyl and Phenylethyl Glycosides from Picrorhiza scrophulariiflora

Three new phenyl glycosides, scrophenoside A ( 1 ), B ( 2 ), and C ( 3 ), and two new phenylethyl glycosides, scroside D ( 4 ) and scroside E ( 5 ), were isolated from the stem of Picrorhiza scrophulariiflora Pennell (Scrophularlaceae), besides five known compounds. On the basis of spectroscopic evidence, the structures of the new compounds were elucidated as 4‐acetyl‐2‐methoxyphenyl 6‐O‐[4‐(β‐D ‐glucopyranosyloxy)vanilloyl]‐β‐D ‐glucopyranoside ( 1 ), 4‐acetylphenyl 6‐O‐[(E)‐p‐coumaroyl]‐β‐D ‐glucopyranoside ( 2 ), 4‐[(1R)‐ and (1S)‐1‐hydroxyethyl]‐2‐methoxyphenyl β‐D ‐glucopyranoside ( 3a and 3b , resp.), 2‐(3,4‐dihydroxyphenyl)ethyl O‐β‐D ‐glucopyranosyl‐(1→3)‐4‐O‐[(E)‐feruloyl]‐β‐D ‐glucopyranoside ( 4 ), and 2‐(3,4‐dihydroxyphenyl)ethyl O‐β‐D ‐glucopyranosyl‐(1→3)‐6‐O‐[(E)‐feruloyl]‐β‐D ‐glucopyranoside ( 5 ).     

Determination of aluminum in highly concentrated iron samples: Study of interferences using high-resolution continuum source atomic absorption spectrometry

High-resolution continuum source atomic absorption spectrometry (HR-CS AAS) has been used to investigate spectral and non-spectral interferences found with a conventional line source atomic absorption spectrometer in the determination of aluminum in pharmaceutical products containing elevated iron and sugar concentrations. A transversely heated graphite furnace was used as the atomizer in both spectrometers. The two most sensitive aluminum lines at 309.3 nm and 396.2 nm were investigated and it was found that an iron absorption line at 309.278 nm, in the vicinity of the aluminum line at 309.271 nm, could be responsible for some spectral interference. The simultaneous presence of iron and the organic components of the matrix were responsible for radiation scattering, causing high continuous and also structured background absorption at both wavelengths. The aluminum and iron absorption could not be separated in time, i.e., the iron interference could not be eliminated by optimizing the graphite furnace temperature program. However, an interference-free determination of aluminum was possible carrying out the measurements with HR-CS AAS at 396.152 nm after applying least squares background correction for the elimination of the structured background. Analytical working range and other figures of merit were determined and are presented for both wavelengths using peak volume registration (center pixel ± 1) and the center pixel only. Limits of detection and characteristic masses ranged from 1.1 to 2.5 pg and 13 to 43 pg, respectively. The method was used for the determination of the aluminum contamination in pharmaceutical formulations for iron deficiency treatment, which present iron concentrations from 10 to 50 g l^− 1. Spike recoveries from 89% to 105% show that the proposed method can be satisfactorily used for the quality control of these formulations.