Heat-resistant pyridine-based poly(ether-ester)s: Synthesis, characterization and properties

A pyridine-based diacid was synthesized via nucleophilic substitution reaction of 4-hydroxy benzoic acid with 2,6-dichloropyridine in the presence of potassium carbonate. The diacid was characterized using FT-IR and 1H-NMR spectroscopic methods and also with elemental analysis. Polycondensation reaction of the diacid with different diols including 1,4-dihydroxy benzene, 1,5-dihydroxy naphthalene, bis-phenol A and bis-phenol-P resulted in preparation of pyridine-based poly(ether-ester)s. The polymers were characterized and their physical and thermal properties including inherent viscosity, molecular weight, solubility, thermal stability, thermal behavior and crystallinity were studied. They revealed high heat-resistance and improved solubility in polar solvents. Structure-property relations for the prepared polyester were also studied.     

Synthesis, Characterization, Spectroscopy and Study of Antimicrobial Properties of Two New Substituted Trichloroaluminate（Ⅲ） Complexes [AlCl3X]- （X = SCN-, CN-）

The synthesis and characterization of two new aluminate(Ⅲ) complexes with general formula K[AlCl3X] are reported. These compounds derived from aluminate trichloride and related salts. Potassium trichlorothiocyanoaluminate, PCTA, and potassium trichlorocyanatoalu-minate, PCCA, are two new ionic aluminate complexes. They can be easily synthesized in a nearly quantitative yield by using the direct reaction of AlCl3 and KX. The complexes were characterized by physico-chemical and spectroscopic methods. Theoretical calculations have been used for the extraction of structural and spectroscopic data of these new synthesized complexes. The antibacterial activities of such compounds were studied against the Staphylococcus aureus, Escherichia coli, Staphylococcus Epidermidis, Estreptococo B and Shigella.     

Ultrasound-assisted emulsification microextraction using low density solvent for analysis of toxic nitrophenols in natural waters

An ultrasound-assisted emulsification microextraction (USAEME) based on low-density solvents was successfully applied for the extraction and pre-concentration of four toxic nitrophenols in water samples. The extracted analytes were analyzed by high-performance liquid chromatography-UV detection. The important parameters influencing the extraction efficiency were studied and optimized utilizing two different optimization methods: one variable at a time (OVAT) and central composite design (CCD). The results showed that the emulsification process can be completed in a few seconds using low-density solvents, but almost 10–20?min is necessary for high-density solvents. Under the optimum conditions (extraction solvent, 1-octanol; extraction solvent volume, 40?µL; sample pH, 3.0; salt concentration, 20% (w/v) NaCl; extraction temperature, 40 (±3)°C), limits of detection of the method were in the range of 0.25 to 1?µg?L^?1 and the repeatability and reproducibility of the proposed method, expressed as relative deviation, varied in the range of 2.2–4.2% and 4.7–6.9%, respectively. Linearity was found to be in the range of 1 to 200?µg?L^?1 and the preconcentration factors (PFs) were between 77 and 175. The relative recoveries of the four nitrophenols from water samples at spiking level of 10.0?µg?L^?1 were in the range of 92.0 to 115.0%.     

A combined experimental and computational investigation of the binary mixtures of 2-methylcyclohexanol and isobutanol

Structural Chemistry - The measured densities and viscosities of the binary mixtures of the isobutanol and 2-methylcyclohexanol were reported experimentally in a certain range of concentrations at...     

A highly sensitive spectrophotometric determination of ultra trace amounts of azide ion in water and biological samples after preconcentration using dispersive liquid-liquid microextraction technique

A simple and highly sensitive method developed for preconcentration and spectrophotometric determination of ultra trace amounts of azide ion (N ₃ ^? ) in water and biological samples using dispersive liquid-liquid microextraction (DLLME) technique. The method is based on ion association formation of azide ion with malachite green and extraction of the ion pairing product using DLLME technique. Some important parameters, such as reaction conditions and the kind and volume of extraction solvent and disperser solvent were studied and optimized. The calibration curve was linear in the range of 0.5–50 μg/L of azide ion. Also, the enrichment factor and extraction recovery obtained were 24.7 and 98.7%, respectively. The method was applied to the determination of azide ion in water and biological samples.     

以方沸石负载Ni(Ⅱ)催化剂修饰的电极电氧化甲醇(英文)

There is a high overvoltage in the oxidation of methanol in fuel cells,and so modified electrodes are used to decrease it.A modified electrode that used Ni(II) loaded analcime zeolite to catalyze the electrooxidation of methanol in alkaline solution was proposed.Analcime zeolite was synthesized by hydrothermal synthesis,and Ni(II) ions were incorporated into the analcime structure,which was then mixed with carbon paste to prepare modified electrode.The electrocatalytic oxidation of methanol on the surface of the modified electrode in alkaline solution was investigated by cyclic voltammetry and chronoamperometry.The effects of the scan rate of the potential,concentration of methanol,and amount of zeolite were investigated.The rate constant for the catalytic reaction of methanol was 6 × 103 cm3 mol-1 s-1 from measurements using chronoamperometry.The proposed electrode significantly improved the electron transfer rate and decreased the overpotential for methanol oxidation.     

A counterexample to the paper ��Weakly associated primes and primary decomposition of modules over commutative rings��

In this note we will show that finitely generated condition is necessary in Theorem 1.2 of the above mentioned paper.     

Intra-operative acoustic hemostasis of liver: production of a homogenate for effective treatment

Objective: We have shown that High-Intensity Focused Ultrasound (HIFU) can effectively control bleeding from injuries to solid organs such as liver, spleen, and lung. Achievement of hemostasis was augmented when a homogenate of tissue and blood was formed. The objective of this study was to investigate quantitatively the effect of homogenate production on HIFU application time for hemostasis. Possible mechanisms involved in homogenate production were also studied.Methods: Ten anesthetized rabbits had laparotomy and liver exposure. Liver incisions, 15-25 mm long and 3-4 mm deep, were made followed immediately by HIFU application. Two electrical powers of 80 and 100 W corresponding to focal acoustic intensities of 2264 and 2829 W/cm², respectively were used. Tissue and homogenate temperatures were measured. Smear and histological tissue sample analysis using light microscopy were performed.Results: In treatments with homogenate formation, hemostasis was achieved in 76 ± 1.3 s (Mean ± Standard Error Mean: SEM) at 80 W. In treatments without homogenate formation (at 80 W), hemostasis was achieved in 106 ± 0.87 s. At 100 W, hemostasis was achieved in 46 ± 0.3 s. The time required for homogenate formation, at 80 and 100 W were 60 ± 2.5 and 23 ± 0.3 s, respectively. The homogenate temperature was 83 °C (SEM 0.6 °C), and the non-homogenate tissue temperature at the treatment site was 60 °C (SEM 0.4 °C). The smear and histological analysis showed significant blood components and cellular debris in the homogenate, with some intact cells.Conclusion: The HIFU-induced homogenate of blood and tissue resulted in a statistically significant shorter HIFU application time for hemostasis. The incisions with homogenate had higher temperatures as compared to incisions without homogenate. Further studies of the correlation between homogenate formation and temperature must be done, as well as studies on the long-term effects of homogenate in achieving hemostasis.     

Microstructure of nickel nanoparticles embedded in carbon films: case study on annealing effect by micromorphology analysis

The presented study is aimed at analyzing the surface texture of amorphous hydrogenated carbon layers containing nickel nanoparticles (Ni‐NPs@a‐C:H) within their structure, which were deposited by Radio Frequency (RF) sputtering and RF‐Plasma Enhanced Chemical Vapor Deposition (RF‐PECVD) methods on glass substrates. Prepared films were then used as research material following their annealing at two different temperatures of 250 °C and 350 °C in an inert argon atmosphere. Series of height samples were taken with the help of atomic force microscopy (AFM) operating in a non‐contact mode and examined in order to determine their fractal characteristics. Raw AFM data were first plane‐fitted to remove the surface bow exhibiting the so‐called residual surface, and then numerically processed to calculate the Areal Autocorrelation Function (AACF), which was later used to compute the Structure Function (SF). The log–log plots of the latter served for calculation of fractal properties of surfaces under investigation, including fractal dimension D, and pseudo‐topothesy K. The analysis of 3‐D surface texture helps to understand their essential characteristics and their implications as well as graphical models and their implementation in computer simulation. Copyright © 2016 John Wiley & Sons, Ltd.