Infrared Spectroscopic and Gravimetric Studies on the Dicyclopentylaminemetal(II) Tetracyanonickellate(II) Host–Aromatic Guest Systems

The host complexes M(Cyclopentylamine)₂Ni(CN)₄ (M=Co or Cd) havebeen prepared in powder form. The spectral data suggest that the structures of thesecompounds are similar to those of the Hofmann-dma-type hosts. The absorptionand the liberation processes of the aromatic guests (benzene, toluene, 1,2-, 1,3-,1,4-dichlorobenzene, 1,4-dibromobenzene o-, m-, p-xylene, naphthalene)in these hosts have been examined at room temperature by gravimetric and spectroscopicmeasurements. The desorption of the benzene guest against time has been measured. Thehost structures do not change on inclusion and liberation of the guests. The host compoundshave been suggested as sorbents for isomeric separations.     

Selenoketene substitution structure

Microwave studies (26.5–40 GHz) of further isotopic species of selenoketene formed by pyrolysis of 1,2,3-selenodiazole (¹²CH₂¹²C^76,77,82Se, ¹²CH₂¹³C⁸⁰Se and ¹³CH₂¹²C⁸⁰Se) and by pyrolysis of 5-deuterio-1,2,3-selenodiazole (¹²CHD¹²C^78,80Se) are reported. In conjunction with earlier results for ¹²CH¹²C^78,80Se an r_s structure has been derived with distances SeC (1.706 Å), CC (1.303 Å), CH (1.0908 A) and a HCH bond angle of 119.7°. The geometry of the CH₂C moiety of selenoketene is closer to allene, CH₂CCH₂, than to ketene, CH₂CO.     

Simultaneous quantification of six phenylethanoid glycosides in some Turkish Scutellaria species by a new HPLC-DAD method

A new HPLC-DAD method was developed and validated for simultaneous determination of six main phenylethanoid glycosides (calceolarioside D, neocalceolarioside D, verbascoside, isoverbascoside, leucoseptoside A and martynoside) in the aerial parts of four Scutellaria L. taxa from flora of Turkey. All standard compounds showed a good linearity (R ² > 0.999) in a relatively wide concentration range (1–120 μg/mL). The LOD of the compounds was in the range of 0.104–1.295 μg/mL and the LOQ was in the range of 0.450–2.536 μg/mL. The recoveries of the selected compounds were calculated in the range of 97.46–117.85%. The amounts of the phenylethanoid glycosides showed variation in the extracts. The developed method was found to be accurate, precise and reproducible, and successfully applied to identify and quantify the phenylethanoid glycoside composition of Scutellaria species.     

A suggested revised conformation of methylthionitrite as seen by its spectra and preliminary ab initio calculations

A proof has recently been given that gaseous methylthionitrite, CH₃SNO, occurs exclusively (or mainly) in its anti conformation [1]. The present paper claims that existing spectral evidence and ab initio calculations now performed suggest that gaseous methylthionitrite is mainly the syn conformer, the extra stability being of the order 1–2 kcal mol^?1. Methyl group rotation in the syn conformer is hindered by a three-fold barrier of height 689 cm^?1 while the methyl group rotation in the anti conformer is hardly hindered. The syn/anti energy difference and the barriers hindering methyl group rotation closely parallel the corresponding measured quantities in methylnitrite, CH₃ONO.     

N,N'-disalicylidene-1,3-diaminopropane as a selective chelating titrant for copper(II)

This study was carried out to develop a new complexometric titration method for determination of copper. For this purpose, the standard solutions of copper(II) (10(-3)-10(-5) M) were potentiometrically titrated using N,N'-disalicylidene-1,3-diaminopropane (Schiff base) as titrant and copper(II)-selective electrode for end-point indication in both ammonium acetate and ammonia/ammonium chloride buffer media. The stoichiometry of titration reaction and interference effects of some metal ions on titration of copper were discussed. There was a good agreement between the results obtained by the proposed titration method and ethylenediaminetetraacetic acid (EDTA) titration method. The accuracy and precision of Schiff base method were tested by five replicate determinations both on the standard solution of copper(II) and standard reference materials. The results have indicated that the percentage of copper in alloys can be safely determined by using the Schiff base method without interference from many other metals in alloys.     

CE Determination of Carbohydrates Using a Dipeptide as Separation Electrolyte

The influence of aminoacid and peptide type buffers as the separation electrolyte to the resolution of underivatized neutral carbohydrates in capillary electrophoresis was investigated. With the use of plain glycylglycine as the background electrolyte, a noticeable improvement in the resolution of carbohydrates was observed. Without any additive, 50 mmol L⁻¹ glycylglycine electrolyte at pH 12 provides both the fast separation and indirect detection of sugars. The electrophoretic mobilities of 16 sugars were calculated at this buffer and the combinations of 10 sugars were simultaneously detected. The method was applied to the determination of sucrose, glucose, and fructose in commercial juice samples.     

A novel method for the spectrophotometric determination of nitrite in water

A rapid, simple, selective and sensitive method for the spectrophotometric determination of nitrite in water has been developed and optimum reaction conditions along with other analytical parameters have been evaluated. Nitrite reacts with barbituric acid in acidic solution to give the nitroso derivative, violuric acid. At analytical wavelength of 310 nm, Beer's law is obeyed over the concentration range 0.00–3.22 ppm of nitrite. The molar absorptivity is 15330 ± 259.7 (95%) with pooled standard deviation of 355.57 and R.S.D. of 2.32%. As well as the method is sensitive (2.99 × 10⁻³ μg NO₂ cm⁻²) and selective, it tolerates most of the potential interferents. It has been successfully applied to nitrite determination in natural waters by use of a calibration graph with determination limit of 1.66 μg NO₂ in 100 mL working solution corresponding to minimum 9.5 ppb NO₂–N in water samples. Lower concentrations of nitrite (3.0 μg NO₂/L sample) is precisely analyzed by using the method of dilution with sample, with R.S.D. of lower than 0.5%. The results were compared with standard N-(1-naphtyl)ethylenediamine dihydrochloride method and very good agreement between the data was observed. The method can easily be applied in the field.     

N-Heterocyclic carbene complexes of palladium(II) and rhodium(I) with pendant ferrocenylmethyl groups: synthesis and electrochemistry

1-Ferrocenylmethyl-3-benzylimidazolidinium iodide and 1-ferrocenylmethyl-3-(2,4,6-trimethylbenzyl)imi-dazolidinium iodide were prepared in good yields by boiling, under reflux, a solution of (ferrocenylmethyl)- trimethylammonium iodide and the appropriate N-alkyl-2-imidazoline in MeCN. From the 1-ferrocenylmethyl-3-ben- zylimidazolidinium iodide salt, N-heterocylic carbene complexes of Pd^II and Rh^I were synthesized by in situ deprotonation and subsequent trapping. The new compounds were characterized by C, H, N analyses, ¹H-n.m.r., ¹³C-n.m.r. and by cyclic voltammetry. The n.m.r. properties of the complexes are compared with those of non-ferrocenylated carbene derivatives. The c.v.'s of these compounds show a number of resolved redox processes, indicating that CH₂Fc substituents are electronically isolated from the remaining molecular framework.     

Determination of Anomalin and Deltoin in Seseli resinosum by LC Combined with Chemometric Methods

Liquid chromatography–chemometric methods [LC-Partial least squares (LC-PLS), LC-principle component regression (LC-PCR) and LC-artificial neural network (LC-ANN)] were developed for the determination of (?)-anomalin (ANO) and deltoin (DEL) in the root and aerial part of Seseli resinosum Freyn et Sint. (Umbelliferae). Firstly, chemometric conditions were optimized by testing different mobile phases at various proportions of solvents with various flow rates in different wavelengths by using a normal phase column to obtain the best separation and recovery results. As a result, a mobile phase consisting of n-hexane and ethyl acetate (75:25 v/v) at a constant flow rate of 0.8 mL min^?1 on the above column system at ambient temperature were found to be the optimal chromatographic condition for good separation and determination of ANO and DEL in samples. Multichromatograms for the concentration set containing ANO and DEL compounds in the concentration range of 50–400 ng mL^?1 were obtained by using a diode array detector (DAD) system at selected wavelength sets, 300 (A), 310 (B), 320 (C), 330 (D) and 340 (E). Three LC-chemometric approaches were applied to the multichromatographic data to construct chemometric calibrations. As an alternative method, traditional LC at single wavelength was used for the analysis of the related compounds in the plant extracts. All of the methods were validated by analyzing various synthetic ANO–DEL mixtures. After the above step, traditional and chemometric LC methods were applied to the real samples consisting of extracts from roots and aerial parts of S. resinosum. The results obtained by LC-chemometric approaches were compared to each other and with those obtained by traditional LC.     

Liquid-membrane electrode sensitive to ammonia and aliphatic amines based on 1-[(2-oxyphenyl)iminomethly]-2-oxybenzene-O,O',N-ammin-nickel(II) complex

In this study, an ammonia-gas-sensing liquid-state membrane electrode based on 1-[(2-oxyphenyl)iminomethyl]-2-oxybenzene-O,O',N-ammin-nickel(II) (Ni(II)-Schiff base) as an ionophore was developed. This membrane electrode gave a very good performance and exhibited linear response with near-Nernstian slope of 50.7+/-0.5 mV per decade, within a concentration range of 1.0x10(-1)-1.0x10(-3) M. The electrode performance depends on the pH of the test solution and the optimum pH range was 10.0-11.5. The effect of concentration of internal solutions in the electrode was also investigated. The selectivity properties of the electrode towards aliphatic amines at a pH value of 10.2 were investigated with the mixed-solution method. Furthermore, the response time and lifetime of the electrode prepared were determined.