Kinetics of the reactions of OH radicals with 2‐methoxy‐6‐(trifluoromethyl)pyridine,diethylamine, and 1,1,3,3,3‐pentamethyldisiloxan‐1‐ol at 298 ± 2 K

Rate constants for the reactions of 2‐methoxy‐6‐(trifluoromethyl)pyridine, diethylamine, and 1,1,3,3,3‐pentamethyldisiloxan‐1‐ol with OH radicals have been measured at 298 ± 2 K using a relative rate method. The measured rate constants (cm³ molecule^?1 s^?1) are (1.54 ± 0.21) × 10^?12 for 2‐methoxy‐6‐(trifluoromethyl)pyridine, (1.19 ± 0.25) × 10^?10 for diethylamine, and (1.76 ± 0.38) × 10^?12 for 1,1,3,3,3‐pentamethyldisiloxan‐1‐ol, where the indicated errors are the estimated overall uncertainties including those in the rate constants for the reference compounds. No reaction of 2‐methoxy‐6‐(trifluoromethyl)pyridine with gaseous nitric acid was observed, and an upper limit to the rate constant for the reaction of 1,1,3,3,3‐pentamethyldisiloxan‐1‐ol with O₃ of <7 × 10^{? 20} cm³ molecule^?1 s^?1 was determined. Using a 12‐h average daytime OH radical concentration of 2 × 10⁶ molecule cm^?3, the lifetimes of the volatile organic compounds studied here with respect to reaction with OH radicals are 7.5 days for 2‐methoxy‐6‐(trifluoromethyl)pyridine, 1.2 h for diethylamine, and 6.6 days for 1,1,3,3,3‐pentamethyldisiloxan‐1‐ol. Likely reaction mechanisms are discussed. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 631–638, 2011     

Rapid initiation of reactions in Al/Ni multilayers with nanoscale layering

Research into nanoenergetic materials is enabling new capabilities for controlling exothermic reaction rates and energy output, as well as new methods for integrating these materials with conventional electronics fabrication techniques. Many reactions produce primarily heat, and in some cases it is desirable to increase the rate of heat release beyond what is typically observed. Here we investigate the Al-Ni intermetallic reaction, which normally propagates across films or foils at rates lower than 10 m/s. However, models and experiments indicate that local heating rates can be very high (10⁷ K/s), and uniform heating of such a multilayer film can lead to a rapid, thermally explosive type of reaction. With the hopes of using a device to transduce electrical energy to kinetic energy of a flyer plate in the timescale of 100's of nanoseconds, we have incorporated a Ni/Al nanolayer film that locally heats upon application of a large electrical current. We observed flyer plate velocities in the 2-6 km/s range, corresponding to 4-36 kJ/g in terms of specific kinetic energy. Several samples containing Ni/Al films with different bilayer thicknesses were tested, and many produced additional kinetic energy in the 1.1-2.3 kJ/g range, as would be expected from the Ni-Al intermetallic reaction. These results provide evidence that nanoscale Ni/Al layers reacted in the timescale necessary to contribute to device output.     

Computational studies of the cone and 1,2,3 alternate calix[6]arene bis‐crown‐4 isomers: structures,NMR shifts,atomic charges,and steric compression

The cone and 1,2,3 alternate isomers of calix[6]arene bis‐crown‐4 were investigated computationally. Structural optimizations, energies, bond distances, and Mulliken charges were calculated by the application of the B3LYP/6‐31g(d) method/basis, followed by NMR calculations via both B3LYP/6‐31g(d) and HF/6‐31g(d). Calculations were completed at three different levels of imposed symmetry, and two calculations investigated the chloroform solvent effects. Better NMR results were obtained from HF/6‐31g(d) calculations that did not impose molecular symmetry constraints. Consideration of solvent effects improved ground state energies, but other improvements were minimal and not significant enough to justify the added computational expense of solvent calculations. Overall results are consistent with known experimental assignments and were valuable for assigning previously unknown NMR peaks. Net charges, electrostatic forces, and local dipoles – but not bond lengths – are strongly correlated to spectroscopic manifestations of steric compression. Copyright © 2009 John Wiley & Sons, Ltd.     

SU(1,1) Coherent States for Position-Dependent Mass Singular Oscillators

The Schr?dinger equation for position-dependent mass singular oscillators is solved by means of the factorization method and point transformations. These systems share their spectrum with the conventional singular oscillator. Ladder operators are constructed to close the su(1,1) Lie algebra and the involved point transformations are shown to preserve the structure of the Barut-Girardello and Perelomov coherent states.     

Direct synthesis of isothiocyanates from isonitriles by molybdenum-catalyzed sulfur transfer with elemental sulfur

The direct molybdenum-catalyzed sulfuration of a variety of isonitriles with elemental sulfur or propene sulfide as sulfur donors affords the corresponding isothiocyanates in good yields and under mild reaction conditions. A catalytic cycle is suggested, in which the molybdenum oxo disulfur complex operates as the active sulfur-transferring species. A novel adduct between the isonitrile and the molybdenum complex has been characterized by X-ray analysis and its association constant determined by UV-vis spectroscopy, but this adduct appears not to be involved in the sulfur-transfer process.     

Reduction of RF-induced sample heating with a scroll coil resonator structure for solid-state NMR probes

Heating due to high power 1H decoupling limits the experimental lifetime of protein samples for solid-state NMR (SSNMR). Sample deterioration can be minimized by lowering the experimental salt concentration, temperature or decoupling fields; however, these approaches may compromise biological relevance and/or spectroscopic resolution and sensitivity. The desire to apply sophisticated multiple pulse experiments to proteins therefore motivates the development of probes that utilize the RF power more efficiently to generate a high ratio of magnetic to electric field in the sample. Here a novel scroll coil resonator structure is presented and compared to a traditional solenoid. The scroll coil is demonstrated to be more tolerant of high sample salt concentrations and cause less RF-induced sample heating. With it, the viable experimental lifetime of a microcrystalline ubiquitin sample has been extended by more than an order of magnitude. The higher B1 homogeneity and permissible decoupling fields enhance polarization transfer efficiency in 15N-13C correlation experiments employed for protein chemical shift assignments and structure determination.     

Structural and morphological investigation of ceria-promoted Al(2)O(3) under severe reducing/oxidizing conditions

A series of CeO(2)/Al(2)O(3) samples with different ceria loadings in the range 0-25 wt % (0, 2, 5, 7.5, 15, and 25%) were prepared by incipient wetness and studied using several complementary techniques such as Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), temperature-programmed reduction (TPR), Raman, high-resolution transmission electron microscopy (HRTEM), and extended X-ray absorption fine structure (EXAFS). The aim of the investigation was to understand the behavior of ceria when deposited on alumina and treated under oxidizing and reducing conditions at high temperature (T >/= 1273 K). It is shown that ceria can partially stabilize alumina toward the formation of low-surface-area phases up to 1373 K under oxidizing conditions, while enhanced stabilization is observed under reducing conditions, being effective up to 1473 K. A detailed quantitative temperature-programmed reduction (TPR) analysis made at different loadings and calcination temperatures allowed us to identify three characteristic regions where the reduction of small and large ceria crystallites occurs with the formation of CeAlO(3) crystallites at high temperature. These are likely responsible for surface-area stabilization. For dispersed ceria samples, reduction takes place almost exclusively at low temperature (<700 K), while a shift to higher temperatures is observed upon increasing the ceria particle size. A fraction of Ce, in samples at low loadings, is stable in the lower oxidation state, even if subjected to strongly oxidizing conditions.     

Magnetic interactions of iron nanoparticles in arrays and dilute dispersions

The magnetic properties of monodisperse Fe nanoparticles with over 4 orders of magnitude difference in concentration are studied by a combination of ordinary and remanent hysteresis loops, zero field cooled magnetization as a function of temperature, and magnetic relaxation rates. We compare the behavior of dilute dispersions with different concentrations, dispersions, and arrays made from the same particles, and nanoparticle arrays with different particle sizes and separations. The results are related to theoretical predictions and are used to create a unified picture of magnetostatic interactions within the assemblies.     

An adiabatic linearized path integral approach for quantum time correlation functions: electronic transport in metal-molten salt solutions

We generalize the linearized path integral approach to evaluate quantum time correlation functions for systems best described by a set of nuclear and electronic degrees of freedom, restricting ourselves to the adiabatic approximation. If the operators in the correlation function are nondiagonal in the electronic states, then this adiabatic linearized path integral approximation for the thermal averaged quantum dynamics presents interesting and distinctive features, which we derive and explore in this paper. The capability of these approximations to accurately reproduce the behavior of physical systems is demonstrated by calculating the diffusion constant for an excess electron in a metal-molten salt solution.     

New chromogenic probes into nanoscopic pockets in enhanced sensing protocols for amines in aqueous environments

[structure: see text] A new sensory MCM-41-based material for the colorimetric sensing and discrimination of amines has been developed.