A study of peroxyoxalate-chemiluminescence of acriflavine

The chemiluminescence arising from the reaction of bis(2,4,6-trichlorophenyl)oxalate (TCPO) with hydrogen peroxide in the presence of acriflavine has been studied. The relationship between the chemiluminescence intensity and concentrations of TCPO, H2O2, acriflavine and the base sodium salicylate are reported. The kinetic parameters for the peroxyoxalate-chemiluminescence (PO-CL) of acriflavine were evaluated from the computer fitting of the corresponding chemiluminescence intensity-time plots.     

Identification of the function of gene lndM2 encoding a bifunctional oxygenase-reductase involved in the biosynthesis of the antitumor antibiotic landomycin E by Streptomyces globisporus 1912 supports the originally assigned structure for landomycinone

The angucycline antibiotic family of the landomycins displays potent antitumor activity. To elucidate early post polyketide synthase (PKS) tailoring steps of the landomycin E biosynthetic pathway in Streptomyces globisporus 1912, the mutant S. globisporus M12 was prepared through gene replacement experiment of lndM2. It encodes an enzyme with putative oxygenase and reductase domains, according to sequencing of the gene and its counterpart lanM2 from S. cyanogenus S136 landomycin A biosynthetic gene cluster. The isolation of the novel shunt products 11-hydroxytetrangomycin and 4-hydroxytetrangomycin along with the well-known angucyclines tetrangomycin and tetrangulol from the culture of S. globisporus M12 provides evidence for the involvement of lndM2 in the early biosynthetic pathway of the landomycins, in particular in the formation of the alicyclic 6-hydroxy function of the landomycin aglycon. We therefore propose LndM2 to be responsible for both hydroxylation of the 6-position and its subsequent reduction. These reactions are necessary before the glycosylation reactions can occur. The results are in agreement with the originally published structure of landomycin but do not support the recently suggested revised structure.     

Synthesis and characterization of adducts of dichlorosulphato bis(1,3-propylenediamine)metal(II) complexes with dialkyltin dichlorides

Summary Adducts of dichlorosulphato bis(1,3-propylenediamine)-metal(II) complexes with dialkyltin dichlorides, [R₂Sn(MeCN) ₂]₂[M(NH(CH₂)₃NH)₂(SO₃Cl)₂] (M = Cr, Fe, Co, Ni or Cu; R = Me or n-Bu) have been prepared. The positive shift in the symmetric SO₃ stretch and splitting of the doubly degenerate (E) modes in their i.r. spectra suggest a covalent linkage for the SO₃Cl^– group. The adducts are non-electrolytes; magnetic moments and ligand field data suggest that each SO₃Cl^– group is monodentate, generating an octahedral geometry around the metal ions, except for Ni^II where tetragonal distortion is observed.Author to whom all correspondence should be directed.     

Ethylenediamine complexes of transition metalbis(chlorosulphates)

Summary The number and positions of the i.r. active modes in ethylenediamine complexes of M(SO₃Cl)₂ (M = Mn, Fe, Co, Ni or Cu) suggest that the SO₃Cl^– anion is covalently bound in these non-electrolytic complexes. Magnetic moments and ligand field data suggest that each SO₃Cl^– group is monodentate, giving an octahedral geometry around the metal ions.     

Growth promotion of HepG2 hepatoma cells by antisense-mediated knockdown of glypican-3 is independent of insulin-like growth factor 2 signaling

Glypican-3 (GPC3) encodes a cell-surface heparan- sulfate proteoglycan and its expression is frequently silenced in ovarian cancer, mesotheliomas, and breast cancer cell lines and ectopic expression of GPC3 inhibited the growth of these cells, suggesting that GPC3 plays a negative role in cell proliferation. In contrast, up-regulation of GPC3 is often observed in hepatoma, neuroblastoma, and Wilms' tumor. Whether GPC3 plays the same growth inhibitory role in these tumors remains to be studied. Here we report that antisense-mediated knockdown of GPC3 in the HepG2 hepatoma cells significantly promotes the growth of hepatoma cells. In addition, we show that this growth promotion is independent of insulin-like growth factor 2 (IGF2) signaling. Our data suggest that GPC3 plays a growth-suppressing role in hepatoma and provide cell biological evidence inconsistent with the hypothesis that GPC3 acts as a growth suppressor by downregulating IGF2.     

MICELLIZATION STUDIES OF DODECYL BENZENESULFONIC ACID AND ITS INTERACTION WITH POLYVINYLPYRROLIDONE

Dodecyl benzenesulfonic acid (DBSA) surfactant was used in the present study to find the effect of concentration on its electrical conductance in solution from 293-323K above and below the critical micelle concentration (CMC). The micellization parameters i.e. degree of counter ion binding (β), aggregation number (n) and number of counter ion micelle(m) were measured. The interaction of DBSA with polyvinylpyrrolidone (PVP) was also studied at 293K throughconductance and surface tension measure ments. A number of important parameters i.e. critical aggregation concentration (CAC), Gibb‘s free energy (△G) and binding ratio (R) were determined and the effect of NaCl on the CAC and polymer saturation point (PSP) was also investigated.     

Solid phase extraction of gold by sorption on octadecyl silica membrane disks modified with pentathia-15-crown-5 and determination by AAS

A simple and selective method for rapid and efficient concentration and determination of μg l⁻¹ levels of Au(III) ions in aqueous solution using octadecyl silica membrane disks modified by pentathia-15-crown-5 and flame atomic absorption spectrometry is presented. The influence of flow rates of eluent and sample solution, amount of ligand, types and least amount of eluent for elution of Au from disks were investigated. Break through volume and limit of detection of the membrane disks modified by 5 mg of the thiacrown ether was found to be 2.0 l and 1.0 μg l⁻¹, respectively. The effects of various cationic interferences on percent recovery of gold were studied. The method was successfully applied for the determinations of gold in some pharmaceutical samples and for the recovery of trace Au³⁺ ions from synthetic and water samples.     

Transfer of radiation technology to developing countries

Transfer of technology is a complex process with many facets, options and constraints. While the concept is an important step in bringing industrialization process to agricultural based countries, it is clear, however, that a country will only benefit from a new technology if it addresses a real need, and if it can be absorbed and adapted to suit the existing cultural and technological base.

International Atomic Energy Agency, as UN body, has a mandate to promote nuclear applicationsand assist Member States in transfer of technology for peaceful applications. This mandate has been pursued by many different mechanisms developed in the past years: technical assistance, coordinated research programmes, scientific and technical meetings, publications, etc. In all these activities the Agency is the organizer and initiator, but main contributions come from expert services from developed countries and, increasingly, from developing countries themselves. The technical cooperation among developing coutries more and more becomes part of different programmes.

In particular, regional cooperation has been demonstrated as an effective instrument for transfer of technology from developed and among developing countries.

Some examples of actual programmes are given.     

Stability-indicating methods for determination of pyritinol dihydrochloride in the presence of its precursor and degradation product by derivative spectrophotometry

A first-derivative spectrophotometric (1D) method and a derivative-ratio zero-crossing spectrophotometric (1DD) method were used to determine pyritinol dihydrochloride (I) in the presence of its precursor (II) and its degradation product (III) with 0.1N hydrochloric acid as a solvent. Linear relationships were obtained in the ranges of 6-22 microg/mL for the (1D) method and 6-20 microg/mL for the (1DD) method. By applying the proposed methods, it was possible to determine pyritinol dihydrochloride in its pure powdered form with an accuracy of 100.36 +/- 1.497% (n = 9) for the (1D) method and an accuracy of 99.92 +/- 1.172% (n = 8) for the (1DD) method. Laboratory-prepared mixtures containing different ratios of (I), (II), and (III) were analyzed, and the proposed methods were valid for concentrations of < or = 10% (II) and < or = 50% (III). The proposed methods were validated and found to be suitable as stability-indicating assay methods for pyritinol in pharmaceutical formulations.     

Modification of the resistance of two epoxy resins to accelerated weathering using calcium sulfate as a photostabilizer

Epoxy-timber composites have received increasing attention during the last decades because there are many advantages related to their uses as construction materials in applications such as timber bridges. However, the durability of epoxy-timber composites under outdoor conditions has become a concern for many epoxy resins. This study evaluated the chemical, thermal, and mechanical properties of two cured epoxies, the product of the diglycidyl ether of bisphenol A with 2,4-trimethyl-1,6-hexanediamine (DGEBA-TMDA) and the analogous resin prepared with the hydrogenated diglycidyl ether of bisphenol A (HDGEBA-TMDA), each mixed with 2?wt. % calcium sulfate (CS). We hypothesized that the use of CS, as an inorganic UV absorber, could decrease undesirable effects arising from exposure to UV light, moisture, and extreme temperatures.

An accelerated aging chamber simulated natural weathering for 1, 2, 3, 4, and 6?months. Chemical changes in cured epoxy systems over time in the presence and absence of CS fillers were determined using Fourier transform infrared spectroscopy (FT-IR). Thermal degradation profiles before and after exposure to accelerated weathering were followed by thermogravimetric analysis (TGA). The glass transition temperatures (T_g) before and after accelerated weathering were measured, and the effect of accelerated weathering on the surface morphology of the epoxy systems was investigated by scanning electron microscopy (SEM). In the presence of CS, after 6?months accelerated weathering the tensile strength of DGEBA-TMDA reduced by 23.8?±?2.4%, compared to 46.5?±?5.5% in its absence, while the corresponding values for HDGEBA-TMDA were 21.4?±?2.1% and 28.7?±?1.8%.