Investigation of the Li1+xV3O8 electrode–organic electrolyte interface by scanning photoelectron microscopy

To investigate the formation of a solid electrolyte interface (SEI) on the Li_1+xV₃O₈ electrode surface in the thermodynamic stability range of the organic electrolyte, we applied scanning photoelectron microscopy (SPEM) to a pristine electrode and to an electrode after ten cycles. The F K-edge absorption spectrum of the cycled electrode showed that LiF forms on the electrode surface during the lithium insertion–extraction process in the Li_1+xV₃O₈/Li cell. The photoelectron spectrum for the cycled electrode showed intense spectral features corresponding to Li 1s, F 2s, F 2p, and P 2p electron signals, whereas these spectral features were of negligible intensity for the pristine electrode. The above results give strong support for the formation of an SEI that consists of LiF and compounds containing phosphorus during operation of the battery. The SPEM images also revealed that the fluorine distribution on the surface of the cycled electrode was inhomogeneous.     

Liminf results on the increments of an (N,d)-Gaussian process

We establish some liminf theorems on the increments of a (N,d)-Gaussian process with the usual Euclidean norm, via estimating upper bounds of large deviation probabilities on the suprema of the (N,d)-Gaussian process. This revised version was published online in June 2006 with corrections to the Cover Date.     

Transport of surface-modified iron nanoparticle in porous media and application to arsenic(III) remediation

The surface-modified iron nanoparticles (S-INP) were synthesized, characterized and tested for the remediation of arsenite (As(III)), a well known toxic groundwater contaminant of concern. The S-INP material was fully dispersed in the aqueous phase with a particle size distribution of 2–10 nm estimated from high-resolution transmission electron microscopy (HR-TEM). X-ray photoelectron spectroscopy (XPS) revealed that an Fe(III) oxide surface film was present on S-INP in addition to the bulk zero-valent Fe⁰ oxidation state. Transport of S-INP through porous media packed in 10 cm length column showed particle breakthroughs of 22.1, 47.4 and 60 pore volumes in glass beads, unbaked sand, and baked sand, respectively. Un-modified INP was immobile and aggregated on porous media surfaces in the column inlet area. Results using S-INP pretreated 10 cm sand-packed columns containing ∼2 g of S-INP showed that 100 % of As(III) was removed from influent solutions (flow rate 1.8 mL min⁻¹) containing 0.2, 0.5 and 1.0 mg L⁻¹ As(III) for 9, 7 and 4 days providing 23.3, 20.7 and 10.4 L of arsenic free water, respectively. In addition, it was found that 100% of As(III) in 0.5 mg/L solution (flow rate 1.8 mL min⁻¹) was removed by S-INP pretreated 50 cm sand packed column containing 12 g of S-INP for more than 2.5 months providing 194.4 L of arsenic free water. Field emission scanning electron microscopy (FE-SEM) showed S-INP had transformed to elongated, rod-like shaped corrosion product particles after reaction with As(III) in the presence of sand. These results suggest that S-INP has great potential to be used as a mobile, injectable reactive material for in-situ sandy groundwater aquifer treatment of As(III).     

640 × 512 pixel narrow-band, four-band, and broad-band quantum well infrared photodetector focal plane arrays

A 9 μm cutoff 640 × 512 pixel hand-held quantum well infrared photodetector (QWIP) camera has been demonstrated with excellent imagery. A noise equivalent differential temperature (NEDT) of 10.6 mK is expected at a 65 K operating temperature with f/2 optics at a 300 K background. This focal plane array has shown background limited performance at a 72 K operating temperature with the same optics and background conditions. In this paper, we discuss the development of this very sensitive long-wavelength infrared camera based on a GaAs/AlGaAs QWIP focal plane array and its performance in quantum efficiency, NEDT, uniformity, and operability. In the second section of this paper, we discuss the first demonstration of a monolithic spatially separated four-band 640 × 512 pixel QWIP focal plane array and its performance. The four spectral bands cover 4–5.5, 8.5–10, 10–12, and 13.5–15 μm spectral regions with 640 × 128 pixels in each band. In the last section, we discuss the array performance of a 640 × 512 pixel broad-band (10–16 μm full-width at half-maximum) QWIP focal plane.     

Intermodulation and noise suppression of a linearized, low-noise hybrid microwave amplifier

A new type of microwave amplifier module, consisting of a solid-state amplifier, a predistortion linearizer, and a traveling-wave-tube (TWT), is realized. Measurements show a noise figure of 2.2 dB at 9.5 GHz and the third-order intermodulation distortion ratio of 53 dBc at 10 dB back off from P1 dB point.     

Validation of a method for predicting the precision, limit of detection and range of quantitation in competitive ELISA.

The mathematical model for predicting the precision, limit of detection (LOD) and range of quantitation (ROQ) in a competitive enzyme-linked immunosorbent assay (ELISA) proposed by Hayashi et al. (Anal. Chem., 2004, 76, 1295) was validated. The model describes the relative standard deviation (RSD) of concentration estimates by the RSDs of pipetting volumes of analyte, enzyme-conjugated antigen, antibody and substrate solutions, and the standard deviation (SD) of inherent absorbances between the wells in an ELISA plate. For 6 kinds of direct competitive ELISA kits, the LOD and ROQ predicted by the model agreed well with those obtained by experiments with real samples. It was also confirmed that the model is applicable to the prediction of uncertainty that depends on the pipetting error of the viscous antiserum solution. The model was demonstrated to be useful for estimating the LOD and ROQ of competitive ELISA.     

The magnetic properties of Be-codoped GaMnN grown via molecular beam epitaxy

GaMnN and Be-codoped GaMnN were grown via molecular beam epitaxy using a single GaN precursor and their structural and magnetic properties were examined. X-ray diffraction and superconducting quantum interference device (SQUID) measurements revealed that the grown layers are homogeneous without precipitates. The saturation magnetization of GaMnN has increased from ∼4 to ∼16 emu/cm³ via codoping of Be. The d–d exchange interaction between Mn atoms was discussed for the ferromagnetism of GaMnN.     

Oil Migration in Chocolate

Oil migration in filled chocolates limits shelf life due to texture changes and loss of visual appeal. Spatial and temporal oil concentration changes of a two-layer chocolate and peanut butter filling system, which models a filled chocolate, were monitored by magnetic resonance imaging. Formulations of chocolate varied with respect to particle size, milk fat content and emulsifier level. Sorption-time experimental data was used to establish the best fit diffusion coefficient for a Fickian diffusion model. On the basis of the comparison of spatial experimental data to the model, Fickian diffusion alone does not account for oil migration. Authors' address: Michael J. McCarthy, Department of Food Science and Technology, University of California, One Shields Avenue, Davis, CA 95616, USA     

Large Sample Properties of Mixture Models with Covariates for Competing Risks

We study the large-sample properties of a class of parametric mixture models with covariates for competing risks. The models allow general distributions for the survival times and incorporate the idea of long-term survivors. Asymptotic results are obtained under a commonly assumed independent censoring mechanism and some modest regularity conditions on the survival distributions. The existence, consistency, and asymptotic normality of maximum likelihood estimators for the parameters of the model are rigorously derived under general sufficient conditions. Specific conditions for particular models can be derived from the general conditions for ready check. In addition, a likelihood-ratio statistic is proposed to test various hypotheses of practical interest, and its asymptotic distribution is provided.     

SECOND BEST TAXES AND QUOTAS IN NITROGEN REGULATION

This paper investigates second best policies to regulate nitrogen leaching. When the policy maker controls the total nitrogen use, an overall tax is superior to an action equivalent overall quota. When the goal is to regulate the expected level of nitrogen leaching, expected profit of a risk neutral farmer is greater under an overall tax than under an overall quota under a reasonable condition. The welfare ranking of action equivalent taxes and quotas for a risk averse farmer is generally ambiguous. In the numerical analyses, overall taxes turned out to be superior to overall quotas with both targets, despite a very high value of absolute risk aversion, 0.01. These results suggest that an overall tax is probably a superior policy to an overall quota to regulate expected total nitrogen use or expected nitrogen leaching for risk neutral and most of risk averse farmers.