in vitro Selection of Aptamer for Imidacloprid Recognition as Model Analyte and Construction of a Water Analysis Platform

Pesticide use in agriculture is one of the threats to water safety. Therefore, detection of pesticide residues is crucial for human health. Compared to conventional chromatographic methods, aptasensors are promising tools for fast, cheap and sensitive detection of environmental contaminants. To the best of our knowledge, such an aptasensor has not been reported for imidacloprid (Imi) which is one of the most widely used pesticides. In order to meet this demand, we initially selected two novel aptamers designated as ‘Apta‐1’ and ‘Apta‐2’ by graphene oxide‐SELEX (GO‐SELEX) method. Then, these aptamers were used to fabricate the gold electrode‐based aptasensor platforms and characterized by using electrochemical methods such as cyclic voltammetry, and electrochemical impedance spectroscopy as well as X‐Ray photoelectron spectroscopy. It was found that the limit of detection value of Apta‐1 based sensor for the Imi was found better than Apta‐2 based system, although linear ranges were similar. Based on that finding, Apta‐1 based system was further tested against possible interference molecules. The proposed platform was successfully used for detection of very low concentrations of Imi in the range of ng/mL. Thus, it eliminates the need for sample pre‐treatment and enables a practical analysis in real wastewater samples.     

Utilization of cascade chemo-bio catalysis for the synthesis of R -1-phenylethyl acetate

Liquid phase tert-butylation of m-cresol was carried out using 12-tungstosilicic acid supported on neutral alumina by varying different parameters. The reaction has also been carried out by using calcined samples under optimized conditions. The present catalyst shows an excellent activity of 93.2%, conversion of 100% selectivity for the o-isomer, an important industrial product.     

Polymer supported 5,10,15,20-tetrakis(phenoxy acetic acid)porphyrin derivative for separation and preconcentration of d- and f-electron metals

5,10,15,20-tetrakis(phenoxy acetic acid) porphyrin (PAAP) was covalently linked to Merrifield chloromethylated resin. Characterization of PAAP and the modified polymeric matrix were performed by ¹H NMR, FTIR and elemental analysis. The sorbent was used for the separation and enrichment of the d-electron metals (Mn(II), Co(II), Ni(II), Cu(II) and Zn(II)) at pH 6–8 and of the f-electron metals U(VI) and Th(IV) at pH 4–5. The metals ions were preconcentrated with a concentration factor range of 115–215 and then determined by flame atomic absorption spectrometry or visible spectrophotometry using Arsenazo(III). The retained metals were eluted with 2.0 mol L⁻¹ HNO₃ in the case of the d-electron metals and 0.1/0.25 mol L⁻¹ HCl in the case of the f-electron metals. The procedure was validated by analyzing the NIST standard reference material 2709 (San Joaquin Soil). Correspondence: Melek Merdivan, Chemistry Department, Faculty of Arts and Sciences, Dokuz Eylul University, 35160 Buca, Izmir, Turkey     

A One‐Dimensional Pyrazine Bridged Copper(II)‐Saccharinato Coordination Polymer

A one‐dimensional copper(II) complex {[Cu(sac)₂(μ‐pyz)(H₂O)]·H₂O}_n ( 1 ) (pyz = pyrazine, and sac = saccharinate) has been synthesized and characterized by elemental analysis, IR spectroscopy, thermal and single crystal X‐ray analyses. Complex 1 crystallizes in the triclinic space group . The [Cu(sac)₂(H₂O)] units are bridged by pyz leading to a one‐dimensional alternating chain in which the copper(II) ions exhibit a distorted square–pyramidal coordination of CuN₄O. The intradimer Cu···Cu distance is 6.881Å, while interdimer Cu···Cu distance is 7.066Å. The supramolecular interactions are mainly controlled by the sac anion and water molecules. The individual chains are linked by strong OW–H···O(sac) hydrogen bonds into a two‐dimensional layers, which are further arranged in a three‐dimensional supramolecular network by aromatic π(sac)···π(sac) stacking interactions and CH···π(pyz) interactions. Thermal analysis of complex 1 shows that the decompositions of the aqua, pyz and sac ligands are observed as distinct steps on the DTA and TG curves.     

A new approach to liquid penetrant inspection: radiolabeled QDots

Penetrant technique is a sensitive non-destructive testing (NDT) method for detecting and locating the presence of cracks in sample surface. Today, NDT is used in a wide range of industries including aerospace, biotechnology, defence, marine, oil–gas and energy plants. This work focuses on potential use of radiolabeled ZnS coated CdTe quantum dots (QDots) as a penetrant for liquid penetrant testing. The synthesized QDots as a precursor were tested for surface defects detection in welded joints. The experimental results show the highest activities were found in defects on the sample surface. These finding are consistent with the sample NDT inspection test report.     

Weakly automorphism invariant modules and essential tightness

While a module is pseudo-injective if and only if it is automorphism-invariant, it was not known whether automorphism-invariant modules are tight. It is shown that weakly automorphism-invariant modules are precisely essentially tight. We give various examples of weakly automorphism-invariant and essentially tight modules and study their properties. Some particular results: (1) R is a semiprime right and left Goldie ring if and only if every right (left) ideal is weakly injective if and only if every right (left) ideal is weakly automorphism invariant; (2) R is a CEP-ring if and only if R is right artinian and every indecomposable projective right R-module is uniform and essentially R-tight.     

A spiro to ansa rearrangement in cyclotriphosphazene derivatives

Nucleophilic substitution reactions of cyclotriphosphazene derivatives having five-membered spiro rings, N(3)P(3)Cl(4)[O(CH(2))(2)X] (X = NH or O) with alkoxides (of tetraethylene glycol and some mono-functional alcohols) give unexpected rearrangements to form stable seven-membered ring ansa compounds, even though crystallographic evidence shows ring distortion and compression of the cyclophosphazene ring. With weaker nucleophiles such as sodium phenoxide and pyrrolidine substitution at a PCl2 group is preferred and no rearrangement takes place. In contrast, reactions of the analogous phosphazenes containing six-membered spiro rings, N(3)P(3)Cl(4)[O(CH(2))(3)X], with all of the above reagents give only normal substitution reactions at the PCl2 moieties and no rearrangement products. The spiro to ansa rearrangements in cyclophosphazenes are remarkable as the reported primary reaction products with the same difunctional reagents HO(CH(2))(2)XH are predominantly spiro, with some dangling and bridging derivatives, but no ansa compounds.     

Fabrication of collagen immobilized electrospun poly (vinyl alcohol) scaffolds

In the development of tissue engineering scaffolds, the interactions between material surface and cells play crucial roles. The biomimetic 3‐D scaffolds absolutely provide better results for fulfilling requirements such as porosity, interconnectivity, cell attachment and proliferation. In this study, 3‐D electrospun scaffolds were prepared by using an electrospinning technique. Photo cross‐linkable polyvinyl alcohol was used as a polymeric matrix. During the electrospinning, the nanofibers were cross‐linked with in situ ultraviolet radiation. The crosslinked polymer fibers were achieved in a simple process at a single step. Nanofiber surface was modified with collagen by a chemical approach. The chemical structures were proven by attentuated total reflectance Fourier transform infrared spectroscopy and proton nuclear magnetic resonance. The surface morphology of the nanofibers was characterized by scanning electron microscope (SEM). Morphological investigations show that the resulting nanofibrous matrix has uniform morphology with a diameter of 220–250 nm. In vitro attachment and growth of 3T3 mouse fibroblasts and human umbilical vein endothelial cells (ECV304) cells on polyvinyl alcohol‐based nanofiber mats were also investigated. Cell attachment, proliferation, and methylthiazole tetrazolium cytotoxicity assays indicated good cell viability throughout the culture time, which was also confirmed by SEM analysis. Copyright © 2015 John Wiley & Sons, Ltd.     

Tuning Photoinduced Intramolecular Electron Transfer by Electron Accepting and Donating Substituents in Oxazolones

The solvatochromic and spectral properties of oxazolone derivatives in various solvents were reported. Fluorescence spectra clearly showed positive and negative solvatochromism depending on substituents. The solvatochromic plots and quantum chemical computations at DFT-B3LYP/6-31?+?G(d,p) level were used to assess dipole moment changes between the ground and the first excited singlet-states. The electron accepting nitro substituent at the para-position increased the π-electron mobility, however, the 3,5-dinitro substituent decreased the π-electron mobility as a result of inverse accumulation of the electronic density as compared with that of its ground state. Experimental and computational studies proved that the photoinduced intramolecular electron transfer (PIET) is responsible for the observed solvatochromic effects. We demonstrate that PIET can be finely tailored by the position of the electron accepting and donating substituents in the phenyl ring of the oxazolone derivatives. We propose that the photoactive CPO derivatives are new molecular class of conjugated push-pull structures using azlactone moiety as the π-conjugated linker and may find applications in photovoltaic cells and light emitting diodes.