N,S-Substituted Dienes from Mono(arylthio)substituted- and S-, S,S-Substituted Dienes

Mono(thio)substituted dienes 1a-1b gave compounds 3a-c and 5d-g with piperazine and piperidine derivatives in dichloromethane. Compounds 8 , 9 , and 10 were obtained from the reactions of perchlorobutadiene ( 6 ) with 1,4-butanedithiol ( 7 ) in ethanol in the presence of sodium hydroxide. Compounds 12a-b , 13a-b were obtained from the reactions of perchlorobutadiene ( 6 ) with allylmercaptan (CH 2 =CH--CH 2 --SH) and mercaptoethanol (HO--CH 2 --CH 2 --SH).     

Novel anhydrous proton conducting copolymers of 1‐vinyl‐1,2,4‐triazole and diisopropyl‐p‐vinylbenzyl phosphonate

Phosphonic acid functional polymers are currently of interest because of their high proton conductivity in humidified and anhydrous systems. In addition, heterocyclic compounds are used in anhydrous proton conducting polymer membranes. In that study, a new copolymer based on 1‐vinyl‐1,2,4‐triazole (VTri) and diisopropyl‐p‐vinylbenzyl phosphonate (VBP) was synthesized, and their thermal, chemical, and proton conducting properties were investigated. The copolymers were synthesized by free radical copolymerization of the corresponding monomers at several monomer feed ratios to obtain P(VTri‐co‐VBP) copolymers. The copolymer samples were then hydrolyzed to produce poly(vinyl triazole‐co‐vinyl phosphonic acid) copolymers. The composition of the copolymers was determined by elemental analysis. The copolymerization and hydrolysis reactions were verified by Fourier transform infrared spectroscopy and ion exchange capacity measurements. Thermogravimetry analysis indicates that the copolymers are thermally stable up to 300°C. In order to increase the proton conductivity, the copolymers were doped with H₃PO₄ at several stoichometric ratios. The proton conductivity increases with triazole and phosphoric acid content. In the absence of humidity, the copolymer electrolyte, P(VTri‐co‐VBPA)1:0.5 X = 2, showed a proton conductivity of 0.005 S/cm at 150°C. Copyright © 2013 John Wiley & Sons, Ltd.     

Proton‐conducting poly(vinylpyrrolidon)–polyphosphoric acid blends

Anhydrous, proton‐conducting polymer electrolytes of poly(vinylpyrrolidon) (PVP) with polyphosphoric acid (PPA) were prepared. PVP‐x‐PPA blends were obtained for 0.5 ≤ x ≤ 3, where x was the number of moles of PO per polymer repeat unit. Fourier transform infrared studies indicated protonation of the carbonyl group in the five‐member ring. Thermogravimetric analysis showed that these materials were stable up to about 180 °C. Differential scanning calorimetry data demonstrated that the addition of the acid plasticized the material, shifting the glass‐transition temperature from 180 °C for the pure polymer to ?23 °C for x = 3. The temperature dependence of the mechanical properties was investigated with shear experiments. The direct‐current conductivity increased with x and reached about 10^?5 S/cm at ambient temperature. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1987–1994, 2001     

A comparative study on aldol‐type condensation reactions of cyclic,acyclic and substituted cyclic ketones by the W(CO)6/CCl4/UV system

Aldol‐type condensation reactions of a number of cyclic, acyclic and substituted cyclic ketones were investigated using the W(CO)₆/CCl₄/UV system. The progress of the reactions was followed by IR and GC‐MS techniques. The cyclic ketone derivatives with β‐ and γ‐substituent gave the expected condensation products. However, the α‐substituted cyclic, acyclic and unsubstituted cyclic ketones with rings larger than six did not. Formation of [W]–ketone complexes with all of the ketones used was observed by FTIR. With respect to our studies, a mechanism involving an intermediate seven‐coordinate tungsten complex has been proposed. Copyright © 2005 John Wiley & Sons, Ltd.     

Densitometric HPTLC Analysis of the 5-Hydroxymethylfurfural Content of Turkish Fruit Wines and Vinegars

JPC – Journal of Planar Chromatography – Modern TLC - A thin-layer chromatographic method with densitometric UV detection at 286 nm after ethyl acetate extraction is described for...     

Effect of Li2CO3 on formation temperature of hBN by modified O'Connor model

This study is interested in the effect of lithium carbonate on the formation of hexagonal boron nitride (hBN) by means of the available experimental methods including TGA, XRD, FTIR, SEM and HR‐TEM. hBN samples were synthesized at the 1450 °C with different molar ratios of lithium carbonate by modified O'Connor routine. The crystalline hBN formation tended to improve with the increment of the Li₂CO₃ concentration level (especially after more 20 %). The dopant quantity decreased the residual stresses due to the presence of possible relaxation mechanisms along with the nanocrystal structure, even favored by XRD experimental findings regarding the enhancement of crystal plane alignments, crystallite sizes and lattice parameters. As for the FTIR surveys, the Li₂CO₃ foreign impurities strengthened more and more the covalent bonds between boron and nitrogen atoms. At the same time, the samples with 40 % lithium carbonate were annealed at the varied temperatures of 1000, 1150, 1300 and 1450 °C to determine the optimum annealing temperature. The XRD+FTIR investigations indicated that the degree of hexagonality improved with the increased annealing temperature. Similarly, the surface morphology confirmed not only the formation of regularity and flaky hexagonal BN structures, but also the strengthening of covalent bonds between the atoms.     

A fluorescent chemical sensor for ethanol determination in alcoholic beverages

A sensor for ethanol is described that is based on the fluorescent probe 5,10,15,20-tetraphenyl porphyrin (TPP). Response is based on the quenching of the fluorescence of TPP by ethanol as a result of electrostatic attraction. The sensor linearly responds to ethanol in the concentration range from 1 to 75 vol.% and was applied to the determination of ethanol in various kinds of wines and whisky.     

Synthesis and proton conductivity studies of polystyrene‐based triazole functional polymer membranes

In this study, poly(vinylbenzylchloride) (PVBC) was produced by free‐radical polymerization of 4‐vinylbenzylchloride, and then it was functionalized with 3‐amino‐1,2,4‐triazole (ATri) and 1H‐1,2,4‐triazole (Tri). The composition of the polymers was verified by elemental analysis, and the structure was characterized by Fourier transform infrared and ¹³C‐nuclear magnetic resonance spectra. PVBC was modified by ATri with 68% and Tri with 50% yield. The polymers were doped with trifluoromethanesulfonic acid (TA) at various molar ratios, X = 0.5, 1, 2, and 3 with respect to aminotriazole and triazole units. Proton transfer from TA to the triazole rings was proved with Fourier transform infrared spectroscopy. Thermogravimetric analysis showed that the samples are thermally stable up to approximately 200 °C. Differential scanning calorimetry results illustrated the homogeneity of the materials. Under anhydrous conditions, PVBCATri3TA and PVBCTri3TA showed highest proton conductivity of 0.086 and 0.042 S/cm, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Fabrication and characterization of calix[4]arene Langmuir–Blodgett thin film for gas sensing applications

Microwave irradiation has been found to be a highly efficient method for etherification of p-tert-butylcalix[4]arene with alkyl bromides or ditosylate. The corresponding products were obtained as a pure form in modest yield within short reaction time when the reactions were performed under microwave irradiation.