Determination of starane (fluroxypyr) herbicide using flow injection spectrophotometry.

The starane herbicide was spectrophotometrically determined by the diazotization method in a flow injection assembly. Since starane is a substituted pyridyl compound the NH2 group at the p-position was exploited for diazotization. Starane was diazotized with nitrite and the diazotized product is coupled with beta-naphthol. The absorbance of the resulting azo dye was measured at 395 nm with a molar absorptivity of 1.5 x 10(4) L mol(-1) cm(-1). The calibration graph was linear over the range of 0.6 to 10 microg/mL, with a relative standard deviation (RSD) of 1.67% and a sampling through put of 60 samples h(-1). The % recovery for the determination of starane was found to be 96%. The method was successfully applied to the determination of the active ingredient of starane herbicide in its formulation as well as in food samples.     

Synthesis,characterization and thermal degradation kinetics of ferrocene‐containing aramids

Low‐temperature solution‐phase polycondensation of 1,1′‐ferrocenedicarboxylic acid chloride with different aromatic diamines was carried out in tetrahydrofuran in the presence of triethylamine to afford ferrocene‐containing aramids. The products were characterized by their solubilities, inherent viscosities, elemental analysis, FTIR spectroscopy, differential scanning calorimetry and thermogravimetry. All of them were insoluble in common solvents tested, except aramid‐IV (derived from 1,8‐naphthalene diamine), which was slightly soluble in N,N′‐dimethylacetamide, N,N′‐dimethylformamide, dimethylsulfoxide and formic acid. However, all were miscible with concentrated H₂SO₄, forming red‐coloured solutions. These all show a reduction in their solution viscosities at ambient conditions in concentrated H₂SO₄ which may be attributed to their non‐Newtonian behaviour. The glass transition temperature for each aramid was quite high, and stable up to 390 °C. The integral procedural decomposition temperatures for the products were calculated using Doyle's method and were found to be intermediate to that of Nylon 66 (419 °C) and Teflon (555 °C), and the activation energy for decomposition of each product was calculated by the Horowitz and Metzger method. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis,characterization and biological activities of organotin(IV) complexes with l-lysine monohydrate

Russian Journal of General Chemistry - The new organotin(IV) complexes have been synthesized by the reaction of l-lysine monohydrate with CS2 and R2SnCl2/R3SnCl. The organotin(IV) complexes and the...     

Magnetic,Electrical and Thermal Studies of Polypyrrole-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> Nanocomposites

This research paper comprises of the synthesis of polypyrrole (PPy)-Fe₂O₃ nanocomposites by employing the in situ chemical oxidative polymerization method. The concentration of the filler material was adjusted between 10–50 wt % of PPy. The synthesized nanocomposites were characterized by using X-ray diffraction (XRD). Magnetic analysis and DC electrical conductivity of the samples were carried out using vibrating sample magnetometer (VSM) and two probe DC conductivity method, point towards magnetically active and electrically conductive samples. The magnetic parameters under applied magnetic field demonstrated that the values of coercivity (H _c ), saturation magnetization (M _s ) and remanence (M _r ) can be tailored by carefully controlling the amount of dopant material into the nanocomposites indicating their suitability for controllable switching devices and microwave absorption applications. The DC electrical conductivity showed an increase up to 20 wt % of filler material and thereafter a decrease in the conductivity of nanocomposites with increase in filler content is observed. Thermogravimetric analysis (TGA) showed an increase in thermal stability with an increase in ferrite content in nanocomposites.     

On Perturbed Fractional Differential Inclusions with Nonlocal Multi-point Erdélyi–Kober Fractional Integral Boundary Conditions

In this paper, by using a nonlinear alternative for a sum of compact upper semicontinuous and contractive multivalued operators, we establish sufficient conditions for the existence of solutions for perturbed fractional differential inclusions with nonlocal multi-point Erdélyi–Kober fractional integral boundary conditions. For the applicability of the main result, we include an example.     

Production of highly conductive textile viscose yarns by chemical vapor deposition technique: a route to continuous process

An oxidative chemical vapor deposition (OCVD) process was used to coat flexible textile fiber (viscose) with highly conductive polymer, poly (3,4‐ethylenedioxythiophene) (PEDOT) in presence of ferric (III) chloride (FeCl₃) oxidant. OCVD is a solvent free process used to get uniform, thin, and highly conductive polymer layer on different substrates. In this paper, PEDOT coated viscose fibers, prepared under specific conditions, exhibited high conductivity 14.2 S/cm. The effects of polymerization conditions, such as polymerization time, oxidant concentration, dipping time of viscose fiber in oxidant solution, and drying time of oxidant treated viscose fiber, were carefully investigated. Scanning electron microscopy (SEM) and FT‐IR analysis revealed that polymerization of PEDOT on surface of viscose fiber has been taken place and structural analysis showed strong interactions between PEDOT and viscose fiber. Thermogravimetric analysis (TGA) was employed to investigate the amount of PEDOT in PEDOT coated viscose fiber and interaction of PEDOT with viscose fiber. The effect of PEDOT coating on the mechanical properties of the viscose fiber was evaluated by tensile strength testing of the coated fibers. The obtained PEDOT coated viscose fiber having high conductivity, could be used in smart clothing for medical and military applications, heat generation, and solar cell demonstrators. Copyright © 2010 John Wiley & Sons, Ltd.     

Facile design and nanostructural evaluation of silver-modified titania used as disinfectant

Fundamental research has been carried out to define optimal "green" synthesis conditions for the production of titania (TiO(2)) and silver (Ag) nanocomposites (TANCs) ranging from 12.7-22.8 nm in diameter. A bottom-up colloidal approach was employed to accurately control TANC monodispersity and composition. TANCs were found to be effective at inactivating Escherichia coli (E. coli) in water. The presence of Ag in the nanocomposites induced a decrease in TiO(2) band gap energy, which favoured valence to conduction band electron transfer and allowed for electron excitation using visible light. Aggregation of ultra-fine particles was prevented through the use of a long-chain polymer as evidenced by electrophoretic mobility studies. The TANCs catalyzed oxidation of bacterial membranes and cell death or disinfection. Theoretically, the TANC mode of E. coli disinfection is via water photolysis, which results in production of hydroxyl radicals and hydrogen peroxide. These interact with the outer membrane polysaccharides and lipids, leading to lipid peroxidation, membrane weakening and resulted in cell death. Our overarching goals were to optimize the variables involved in TANC "green" synthesis and to characterize its nanostructure. High resolution (HR) transmission and scanning electron microscopic (TEM and SEM) studies demonstrated that TANCs were highly crystalline and mono-dispersive. Elemental composition of Ag and Ti, as measured by X-ray energy dispersive (EDS) and X-ray photoelectron spectroscopy (XPS) confirmed sample purity. Ultraviolet-visible (UV-VIS) spectroscopy showed that the energy band-gap of Ag modified TiO(2) was in the visible range.     

Dynamical behavior of a stochastic Nicholson’s blowflies model with distributed delay and degenerate diffusion

Nonlinear Dynamics - The mathematical model with time delay is often more practical because it is subject to current and past state. What remains unclear are the details, such as how time delay and...     

The growth of nanoscale periodic and dot-like structures on the surface of stainless steel with femtosecond laser pulses in the dry and wet ambient environment

The present work deals with growth of nanoscale periodic and dot-like structures on the surface of stainless steel (SS) by the irradiation of femtosecond laser pulses. For this purpose Ti: Sapphire femtosecond laser pulses (wavelength of 800 nm, pulse length of 25 fs and pulse repetition rate of 1 kHz) were employed in a dry (air) and liquid confined (deionized water and ethanol) environments. The targets were exposed to 1000 succeeding pulses for various fluences ranging from 50 to 150 mJ?cm^?2. Nanoscale structures including ripples, and dots were observed by SEM analysis. The growth and dependence of structure-formation on the ambient environment and laser fluence in both central as well as peripheral ablated areas is systematically investigated. The development of nanostructures and nanoripples is correlated with structural analysis carried out by micro Raman spectroscopy.