Determination of camptothecin in biological fluids using reversed-phase high-performance liquid chromatography with fluorescence detection

Camptothecin, a plant alkaloid with antitumor activity, is a potent and rapidly acting inhibitor of DNA synthesis. The objective of this study was to develop a sensitive high-performance liquid chromatographic (HPLC) method for the detection and estimation of the camptothecin concentration in biological fluids. Using HPLC coupled with fluorescence detection, at an excitation wavelength of 370 nm and an emission wavelength of 434 nm, we found that the lower limits of detection for camptothecin in aqueous, plasma and urine samples were 0.5, 1 and 10 ng/ml, respectively. The ideal mobile phase used was methanol-10 mM potassium phosphate (75:25, v/v, pH 4.0). To determine the utilization of the method in a biological system, we studied the pharmacokinetics of camptothecin in mice. Elimination of camptothecin from mice blood was triphasic and followed first-order kinetics. The half-life of camptothecin in mouse blood was 25.7 min. Our studies indicate that HPLC with fluorescence detection for the determination of camptothecin in different media is a simple, rapid, sensitive and reproducible method.     

Parameterising matrix-assisted laser desorption/ionization (MALDI): effect of solvents and co-additives on analyte peak intensities

The peak intensities obtained when 2,5-dihydroxybenzoic acid (DHB) was used as a 'classic' matrix were measured using substance P (SP) and betacyclodextrin (BCD) as analytes. Enhancements in peak intensities were observed going from 1:1 MeOH/H2O to dimethylforamide (DMF) as matrix solvents. Also non-covalent interactions between SP and solvent and DHB were observed suggesting close interactions between matrix, solvent and analyte in the gas-phase. Peak enhancements were previously reported with 'superDHB' (DHB and 2-hydroxy-5-methoxybenzoic acid at 10% v/v). Co-addition of structural analogues and their respective absorption coefficients were determined. It was found that other analogues used as co-matrices could give analyte peak enhancement similar to reported for sDHB with the additional benefit that some analogues could act as matrices with DHB addition. No direct correlation was observed between absorption coefficient and the ability of the molecule to act as a 'good' UV MALDI matrix.     

Dichotenone-a and -b: two new enones from the marine brown alga Dictyota dichotoma (Hudson) Lamour

Marine brown alga Dictyota dichotoma (Dictyotaceae) collected from Karachi coast of Arabian Sea yielded two new (1 and 2) enones (dolastane-diterpenoids) named: dichotenone-A and -B along with an olide (loliolide, 3) as a new source. Their structures have been characterized with the aid of 2D-NMR spectroscopic techniques.     

Characterisation and ac-electrical investigation of sublimated bis(dimethylglyoximato)palladium(II) thin films

Thin films of bis(dimethylglyoximato)palladium(II) complex of polycrystalline structure were prepared by sublimation in a vacuum at 140 °C, on glass and p-Si substrates. The films were characterised by spectral optical absorption, energy dispersion X-ray fluorescence (EDXRF), and X-ray diffraction (XRD) methods. After characterisation, metal-insulator (complex)-semiconductor MIS devices were fabricated to measure the frequency dependence of ac-conductivity in a range of 5-100 kHz. Data of ac-measurements follow the correlated barrier-hopping CBH model, from which one of the fundamental absorption peaks, the minimum hopping distance, and other parameters of the CBH model were determined, connecting and relating the optical, structural, and electrical measurements. The dielectric properties of the complex were studied through Debye model, from which the relaxation time for the dipoles (2.45 × 10⁻⁶ s) and the molecular dipole moment (3.63 × 10⁻³⁰ C m ) were determined.     

Reactions with Carbo(heterylhydrazonoyl) Halides. I. Chemistry of Carbo(3-phenylpyrazol-5-yl-hydrazonoyl) Chlorides

The Carbo(3-phenylpyrazol-5-yl-hydrazonoyl) halides 1a , b react with active methylene compounds to yield the 1-(3-phenylpyrazol-5-yl)-pyrazole derivatives 2a – k (Scheme 1). The acyclic intermediates 3a , b could be isolated from reaction of 1a , b with acetylacetone, thus establishing the substitution mechanism for these reactions. Compounds 1a , b reacted with carbon disulfide, phenyl isothiocyanate, methyl cyanide, and with p-chlorobenzaldehyde to yield the corresponding heterocyclic derivatives 5 – 8 , respectively (Scheme 2). The behaviour of compounds 2 with hydrazine hydrate is reported.     

A new approach for the solid-phase synthesis of pyrrolo[2,1-c][1,4]benzodiazepines involving reductive cleavage

A methodology based on reductive cleavage followed by cyclization, for the solid-phase synthesis of pyrrolo[2,1-c][1,4]benzodiazepines employing DIBAL-H, is described.     

Viscoelasticity,mechanical properties,and in vivo biocompatibility of injectable polyvinyl alcohol/bioactive glass composite hydrogels as potential bone tissue scaffolds

Abstract

An injectable composite hydrogel composed of polyvinyl alcohol (PVA) and bioactive glass (BG) particles were synthesized by a physical crosslinking approach. The morphology, mechanical properties, and viscoelasticity of the PVA/BG composite hydrogel were characterized. Scanning electronic microscopy (SEM) showed uniform and homogeneous distribution of BG particles throughout the composite hydrogel. The incorporation of 2.5?wt% of BG particles in the composite hydrogel formulations, enhanced the static compressive strength and static elastic modulus by 325% and 150%, respectively. The storage molds (G′) was greater than the loss modules (G′′) at all the frequency range studied, which revealed a self-standing elastic composite hydrogel with a smooth injectability. The PVA/BG composite hydrogel was also implanted subcutaneously in the dorsal region of adult male rats. After 4?weeks of implantation, no inflammatory cells were seen within and around the implant, which indicated that the composite hydrogel was biocompatible. The properties of the synthesized injectable PVA/BG composite hydrogel demonstrate its capability toward bone regeneration.     

Inhibition of Pb-Leaching from Lead Crystal Glass by Coating with Films Prepared by the Sol-Gel Method

The chemical durability of lead glass tumblers (24% PbO) in a 4% (v/v) acetic acid solution before and after coating with sol-gel derived SiO2 films was assessed to determine the extent of reduction in Pb-leaching that can be achieved. It was found that by coating the internal surface of the glass tumblers with 1 ml of 10% TEOS solutions at 100°C and densifying the coating formed at 500°C for 1 h, it was possible to reduce Pb-leaching to about one quarter of that of the uncoated glass.     

Synthesis of ferrocenyl-1,2-diketones and related compounds: Crystal and molecular structures of 1,2-diferrocenylethanedione and 1-ferrocenyl-2-(4-biphenylyl) ethanedione

Ferrocenyl-1,2-diketones FcCOCOR, 3, [Fc = (C₅H₅)Fe(C₅H₄)] can be prepared by oxidation of acylferrocenes FcCOCH₂R or, more efficiently, by oxidation of the isomeric ketones FcCH₂COR, 2. The ketones 2 are in turn readily synthesized from the salt (FcCH₂PPh₃)⁺I⁻ via the acylated salts [FcCH(COR)PPh₃]⁺I⁻. The haloacylferocenes FcCOCCl_x H_3−x (x = 1, 2, 3, of which the x = 2 example is synthetically equivalent to a diketone) are synthesized by Friedel—Crafts acylation of ferrocene using CCl_xH_3−xCOCl/AlCl₃, but the reaction proceeds via two parallel pathways, one giving the normal acyl derivatives FcCOCCl_xH_3−x and the other giving the reduced products FcCOCCl_x−1H_4−x. Two diketones FcCOCOFc 3b and FcCOCOC₆H₄Ph 3c have been structurally characterised by single-crystal X-ray diffraction.     

Insights into the Retention Mechanisms on Perfluorohexylpropylsiloxane-Bonded (Fluophase-RP) and Octadecylsiloxane-Bonded (Betasil C18) Stationary Phases Based on the Same Silica Substrate in RP-LC

The solvation parameter model is used to elucidate the retention mechanism on a perfluorohexylpropylsiloxane-bonded (Fluophase RP) and octadecylsiloxane-bonded (Betasil C18) stationary phases based on the same silica substrate with acetonitrile–water and methanol–water mobile phase compositions. Dewetting affects the retention properties of Fluophase RP at mobile phase compositions containing less than 20% (v/v) acetonitrile or 40% (v/v) methanol. It results in a loss of retention due to an unfavorable change in the phase ratio as well as changes in specific intermolecular interactions. Steric repulsion reduces retention of bulky solutes on fully solvated Betasil C18 with methanol–water (but not acetonitrile–water) mobile phase compositions but is not important for Fluophase RP. The retention of weak bases is affected by ion-exchange interactions on Fluophase RP with acetonitrile–water, and to a lesser extent, methanol-water mobile phases but these are weak at best for Betasil C18. The system constants of the solvation parameter model and retention factor scatter plots are used to compare selectivity differences for Fluophase RP, Betasil C18 and a perfluorophenylpropylsiloxane-bonded silica stationary phase Discovery HS F5 for conditions where incomplete solvation, steric repulsion and ion-exchange do not significantly contribute to the retention mechanism. Lower retention on Fluophase RP results from weaker dispersion and/or higher cohesion moderated to different extents by polar interactions since solvated Fluophase RP is a stronger hydrogen-bond acid and more dipolar/polarizable than Betasil C18. Retention factors for acetonitrile–water mobile phases are highly correlated for Fluophase RP and Betasil C18 except for compounds with a large excess molar refraction and weak hydrogen-bonding capability. Selectivity differences are more significant for methanol–water mobile phases. Retention factors on Fluophase RP are strongly correlated with those on Discovery HSF5 for acetonitrile–water mobile phases while methanol–water mobile phases retention on Fluophase RP is a poor predictor of the retention order on Discovery HS F5.