A new catalytic method for the synthesis of selectively substituted biphenyls containing an oxoalkyl chain

A novel reaction sequence leading to the synthesis of substituted biphenyls containing a carbonyl group in an aliphatic chain has been achieved in one-pot reaction starting from iodoarenes and allylic alcohols under the catalytic action of palladium and norbornene. The latter is temporarily incorporated into a palladacycle, which directs the reaction towards the selective formation of an arylaryl bond. Norbornene spontaneously deinserts to allow the biphenylylpalladium bond thus formed to react in its turn with the allylic alcohol.     

Kinetics and mechanism of *NO2 reacting with various oxidation states of myoglobin

Nitrogen dioxide ((*)NO(2)) participates in a variety of biological reactions. Of great interest are the reactions of (*)NO(2) with oxymyoglobin and oxyhemoglobin, which are the predominant hemeproteins in biological systems. Although these reactions occur rapidly during the nitrite-catalyzed autoxidation of hemeproteins, their roles in systems producing (*)NO(2) in the presence of these hemeproteins have been greatly underestimated. In the present study, we employed pulse radiolysis to study directly the kinetics and mechanism of the reaction of oxymyoglobin (MbFe(II)O(2)) with (*)NO(2). The rate constant of this reaction was determined to be (4.5 +/- 0.3) x 10(7) M(-1)s(-1), and is among the highest rate constants measured for (*)NO(2) with any biomolecule at pH 7.4. The interconversion among the various oxidation states of myoglobin that is prompted by nitrogen oxide species is remarkable. The reaction of MbFe(II)O(2) with (*)NO(2) forms MbFe(III)OONO(2), which undergoes rapid heterolysis along the O-O bond to yield MbFe(V)=O and NO(3-). The perferryl-myoglobin (MbFe(V)=O) transforms rapidly into the ferryl species that has a radical site on the globin ((*)MbFe(IV)=O). The latter oxidizes another oxymyoglobin (10(4) M(-1)s(-1) < k(17) < 10(7) M(-1)s(-1)) and generates equal amounts of ferrylmyoglobin and metmyoglobin. At much longer times, the ferrylmyoglobin disappears through a relatively slow comproportionation with oxymyoglobin (k(18) = 21.3 +/- 5.3 M(-1)s(-1)). Eventually, each (*)NO(2) radical converts three oxymyoglobin molecules into metmyoglobin. The same intermediate, namely MbFe(III)OONO(2), is also formed via the reaction peroxynitrate (O(2)NOO(-)/O(2)NOOH) with metmyoglobin (k(19) = (4.6 +/- 0.3) x 10(4) M(-1)s(-1)). The reaction of (*)NO(2) with ferrylmyoglobin (k(20) = (1.2 +/- 0.2) x 10(7) M(-1)s(-1)) yields MbFe(III)ONO(2), which in turn dissociates (k(21) = 190 +/- 20 s(-1)) into metmyoglobin and NO(3-). This rate constant was found to be the same as that measured for the decay of the intermediate formed in the reaction of MbFe(II)O(2) with (*)NO, which suggests that MbFe(III)ONO(2) is the intermediate observed in both processes. This conclusion is supported by thermokinetic arguments. The present results suggest that hemeproteins may detoxify (*)NO(2) and thus preempt deleterious processes, such as nitration of proteins. Such a possibility is substantiated by the observation that the reactions of (*)NO(2) with the various oxidation states of myoglobin lead to the formation of metmyoglobin, which, though not functional in the gas transport, is nevertheless nontoxic at physiological pH.     

On-column polymer-imbedded graphite inlet electrode for capillary electrophoresis coupled on-line with flow injection analysis in a poly(dimethylsiloxane) interface

A method for coupling an electrophoretic driven separation to a liquid flow, using conventional fused-silica capillaries and a soft polymeric interface is presented. A novel design of the electrode providing high voltage to the electrophoretic separation was also developed. The electrode consisted of a conductive polyimide/graphite imbedded coating immobilized onto the capillary electrophoresis (CE) column inlet. This integrated electrode gave the same separation performance as a commonly used platinum electrode. The on-column electrode also showed good electrochemical stability in chronoamperometric experiments. In addition, with this electrode design, the electrode position relative to the inlet end of the CE column will always be constant and well defined. The on-line flow injection analysis (FIA)-CE system was used with electrospray ionization (ESI)-time of flight (TOF)-mass spectrometry detection. The preparation of the PDMS (poly(dimethylsiloxane)) interface for FIA-CE is described in detail and used for initial tests of the on-column polymer-imbedded graphite inlet electrode. In this interface, a pressure-driven liquid flow, a make up CE electrolyte and a CE column inlet meet in a two-level cross (95 microm ID) in the PDMS structure, enabling independent flow characterization.     

Comparison of solution-blending and melt-intercalation for the preparation of poly(ethylene-co-acrylic acid)/organoclay nanocomposites

Ethylene-acrylic acid copolymers (EAAs) and commercial montmorillonite clays organically modified with dimethyldihydrogenatedtallowammonium ions (Cloisite^® 15A and 20A) were used for the synthesis of nanocomposites by melt-compounding, static melting of polymer/clay mixtures and solution-intercalation in order to compare the effectiveness of these procedures and to shed light on the thermodynamics and the kinetics of the intercalation process. The preparation from solution was made by the use of several solvents, such as toluene, xylene, chloroform, etc., which were then removed from the hybrids by precipitation in different non-solvents or by evaporation. Particular attention was paid to the effect of the thermal treatments which are often used when processing the composites prepared from solution. X-ray diffraction (XRD) of the solution-blended composites showed that no intercalation of the EAAs inside the clay galleries can be achieved if solvent removal is made by precipitation in non-solvents or by room-temperature evaporation. On the contrary, intercalation was found to occur very rapidly (in less than 1 min) when both the hybrids prepared from solution and the mechanical blends of powdered components were melted in the absence of shear. Polymer intercalation was also found to occur, though with a lower rate, upon annealing the powder mixtures at temperatures lower than the EAA melting point. Microscopic observations made by polarized optical microscopy, scanning electron microscopy and transmission electron microscopy showed that the clay particles dispersion is appreciably lower for the composites prepared from solution, compared to those produced in the melt under shear flow conditions. The hybrids obtained by static melting of powder mixtures, on the other side, were expectedly found to comprise micron sized clay agglomerates, although intercalation was demonstrated also for these materials by XRD. The structure of the intercalated silicate layers stacks, characterized by an interlayer spacing of 4.0 nm, was shown to be independent of the preparation procedure and to correspond to thermodynamic equilibrium.     

Synthesis, characterization and thermal properties of new aromatic quaternary ammonium bromides: precursors for ionic liquids and complexation studies

Series of new aromatic R₂R′₂N⁺Br⁻ (R=benzyl, 4-methylbenzyl, 2-phenylethyl, 3-phenylpropyl; R′=ethyl, methyl, isopropyl) or RR′₂NH⁺Br⁻-type (R=benzyl, R′=isopropyl) quaternary ammonium bromides were prepared by using novel synthetic route in which a formamide (N,N-diethylformamide, N,N-dimethylformamide, N,N-diisopropylformamide) is treated with aralkyl halide in presence of a weak base. The compounds were characterized by ¹H-NMR and ¹³C-NMR spectroscopy and mass spectrometry. Structures of the crystalline compounds were determined by X-ray single crystal diffraction, and in addition the powder diffraction method was used to study the structural similarities between the single crystal and microcrystalline bulk material. Three of the compounds crystallized in monoclinic, two in orthorhombic and one in triclinic crystal system, showing ion pairs, which are interconnected by weak hydrogen bonds and weak π-π interactions between the phenyl rings. Three of the compounds appeared as viscous oil or waxes. Finally, TG/DTA and DSC methods were used to analyze thermal properties of the prepared compounds. The lowest melting points were obtained for diethyldi-(2-phenylethyl)ammonium bromide (122.2 °C) and for diethyldi-(3-phenylpropyl)-ammonium bromide (109.1 °C). In general, decomposition of the compounds started at 170-190 °C without identifiable cleavages, thus liquid ranges of 30-70 °C were observed for some of the compounds.     

2 alpha-(3-hydroxypropyl)- and 2 alpha-(3-hydroxypropoxy)-1 alpha,25-dihydroxyvitamin D3 accessible to vitamin D receptor mutant related to hereditary vitamin D-resistant rickets

Hereditary vitamin D-resistant rickets (HVDRR) is a genetic disorder caused by mutations in the vitamin D receptor, which lead to resistance to 1alpha,25-dihydroxyvitamin D(3) [1alpha,25(OH)(2)D(3)]. We found that the A ring-modified analogues, 2alpha-(3-hydroxypropyl)- and 2alpha-(3-hydroxypropoxy)-1alpha,25(OH)(2)D(3), (O1C3 and O2C3) can bind better than the natural hormone to the mutant VDR (R274A), which similar to the HVDRR mutant, R274L, had lost the hydrogen bond to the 1alpha-hydroxyl group of 1alpha,25(OH)(2)D(3).     

Indium- and zinc-mediated Barbier-type allylations of an N,N-(dimethylsulfamoyl)-protected aldimine and subsequent deprotection

Barbier-type Zn and In-mediated allylations of an N,N-(dimethylsulfamoyl)-protected aldimine with different allyl bromides were investigated for the preparation of N-homoallylic sulfamides. The desired N,N-(dimethylsulfamoyl)-protected products were obtained in moderate to high yields in THF as the optimal solvent. Their further derivatization was demonstrated by a facile preparation of a functionalized dehydropiperidine by an allylation/olefin metathesis reaction sequence. A high yielding deprotection of the N,N-dimethylsulfamoyl group was likewise demonstrated.     

Dichloro and alkylchloro gallium derivatives of dichalcogenoimidodiphosphinate ligands: isolation of a spirogallium cation

Dichloro and chloromethyl Ga(III) complexes of general formulae [XClGa-eta2-{R2P(E)NP(E'R'2-E,E'}](X = Cl, R, R'= Ph, E, E'= O (1), S (2), Se (3); R = Ph, R'= OEt, E = O, E'= S (4); R = Me, R'= Ph, E, E'= S (5) and X = Me, E, E'= O (6), S (7), Se (8)) were synthesised by either metathesis reactions between GaCl3 and the potassium salt of the ligand (X = Cl) or by methane eliminations from in situ prepared GaMe2Cl and the protonated ligands LH (X = Me). Redistribution reaction of (3) in either CDCl3 or THF afforded the solvent-free tetracoordinate gallium spirocycle cation [Ga-{eta2-{Ph2P(Se)NP(Se)Ph2-Se,Se'})2]+ (9+). The molecular structures of complexes 2, 4, 5, 7 and 9(+) show non-planar gallacycle rings.     

Correlation between Small-Angle X-ray Scattering spectra and apparent diffusion coefficients in the study of structure and interaction of sodium taurodeoxycholate micelles

Small-Angle X-ray Scattering (SAXS) and Dynamic Light Scattering (DLS) measurements were carried out on aqueous micellar solutions of the ionic biological detergent sodium taurodeoxycholate (NaTDC). Apparent diffusion coefficients (D(app)) and SAXS spectra of NaTDC 0.1 M solutions at different ionic strengths (0.1-0.3 M NaCl) were reported. A comparative analysis of SAXS spectra and D(app) data was performed to infer information on particle structure and interaction potential. Uniform particles with a spherical, an oblate, and a prolate symmetry were used to model the micelles in the data interpretation. A hard-core interaction shell of suitable thickness and a screened Coulomb potential of the electric double layer (EDL potential) were alternatively used to represent the long-range repulsive tail of the interaction potential. The Percus Yevick and the Rescaled Mean Spherical Approximation were applied. To compare the data of the two techniques, for each sample, a D(app) was calculated from the SAXS best-fitting geometrical parameters and interparticle structure factor of the micelles. Hence, a fitting procedure involving both the scattering and D(app) data was performed. The interpretation of SAXS spectra does not allow the discrimination between the oblate and the prolate symmetries of the aggregates. On the other hand, the comparison of calculated and experimental D(app) values indicates that the prolate ellipsoid is better suited to represent the micelle shape. Moreover, the agreement between calculated and experimental D(app) values is sensitively better at the lowest NaCl concentration when the EDL potential is used. A rodlike micellar growth and a progressive screening of the electrostatic interactions is testified by the trends of best-fitting parameters as a function of the added electrolyte.