Crosslinked sulfonated polyimide networks as polymer electrolyte membranes in fuel cells

Sulfonated polyimides with tertiary nitrogen in the polymer backbone were synthesized with 1,4,5,8‐naphthalenetetracarboxylic dianhydride, 4,4′‐diaminobiphenyl 2,2′‐disulfonic acid, 2‐bis[4‐(4‐aminophenoxy)phenyl]hexafluoropropane, and diaminoacrydine hemisulfate. They were crosslinked with a series of dibromo alkanes to improve the hydrolytic stability. The crosslinked sulfonated polyimide films were characterized for their thermal stability, ion‐exchange capacity (IEC), water uptake, hydrolytic stability, and proton conductivity. All the sulfonated polyimides had good thermal stability and exhibited a three‐step degradation pattern. With an increase in the alkyl chain length of the crosslinker, IEC decreased as 1.23 > 1.16 > 1.06 > 1.01, and the water uptake decreased as 7.29 > 6.70 > 6.55 > 5.63. The order of the proton conductivity of the crosslinked sulfonated polyimides at 90 °C was as follows: polyimide crosslinked with dibromo butane (0.070) > polyimide crosslinked with dibromo hexane (0.055) > polyimide crosslinked with dibromo decane (0.054). The crosslinked polyimides showed higher hydrolytic stability than the uncrosslinked polyimides. Between the crosslinked polyimides, the hydrolytic stability decreased with an increase in the alkyl chain length of the crosslinker. The crosslinked and uncrosslinked sulfonated polyimides exhibited almost the same proton conductivities. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2370–2379, 2005     

Reduction effect on the optical properties of Sm doped in SrB4O7 and SrB6O10 crystals

Reduction effects on the optical properties of Sm²⁺ ions doped in SrB₄O₇ and SrB₆O₁₀ crystals were studied by measurements of luminescence intensity decay as a function of time, X-ray irradiation and laser power effects on the photoluminescence. The fluorescence intensity of Sm²⁺ doped in SrB₄O₇ and SrB₆O₁₀ crystals decreased upon excitation at 488 nm of Ar⁺ laser and this so-called photo-bleaching effect was highly dependent on the sample preparation conditions. The fluorescence intensity of Sm²⁺ doped in SrB₄O₇ decreased about 13%, while it decreased about 55% in the SrB₆O₁₀ crystal irradiated with X-ray for 10 h. Differences of photo-beaching effect and other optical properties of Sm²⁺ doped in SrB₄O₇ and SrB₆O₁₀ are discussed.     

Hydrogen bonding interactions and miscibility between phenolic resin and octa(acetoxystyryl) polyhedral oligomeric silsesquioxane (AS‐POSS) nanocomposites

We have synthesized a polyhedral oligomeric silisesquioxane (POSS) derivative containing eight acetoxystyryl functional groups [octa(acetoxystyryl)octasilsesquioxane (AS‐POSS)] and then blended it with phenolic resin to form nanocomposites stabilized through hydrogen bonding interactions between the phenolic resin's hydroxyl group and the AS‐POSS derivative's carbonyl and siloxane groups. One‐ and two‐dimensional infrared spectroscopy analyses provided positive evidence for these types of hydrogen bonding interactions. In addition, we calculated the interassociation equilibrium constant, based on the Painter–Coleman association model (PCAM), between phenolic resin and POSS indirectly from the fraction of hydrogen‐bonded carbonyl groups; quantitative analyses indicate that the hydroxyl–siloxane interassociation from the PCAM is entirely consistent with the classical Coggesthall and Saier (C and S) methodology. From a thermal analysis, we observed that the miscibility between phenolic and AS‐POSS occurs at a relatively low AS‐POSS content, which characterizes this mixture as a polymer nanocomposite system. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 673–686, 2006     

A discrete hierarchical model of intra-specific competition

A discrete hierarchical model with either age, size, or stage structure is derived. The resulting scalar equation for total population level is then used to study contest and scramble intra-specific competition. It is shown how equilibrium levels and resilience are related for the two different competition situations. In particular, scramble competition yields a higher population level while contest competition is more resilient if the uptake rate as a function of resource density is concave down. The conclusions are reversed if the uptake rate is concave up.     

Miscibility,specific interactions,and self‐assembly behavior of phenolic/polyhedral oligomeric silsesquioxane hybrids

The miscibility of a phenolic resin with polyhedral oligomeric silsesquioxane (POSS) hybrids and the specific interactions between them were investigated with Fourier transform infrared (FTIR) spectroscopy and wide‐angle X‐ray diffraction (WAXD). An analysis of the morphology and microstructure was performed with polarized optical microscopy and atomic force microscopy (AFM). The interassociation equilibrium constant between the phenolic resin and POSS (38.7) was lower than the self‐association equilibrium constant of pure phenolic (52.3) according to the Painter–Coleman association model. This result indicated that POSS was partially miscible with the phenolic resin. A polarized optical microscopy image of a phenolic/POSS hybrid material (20 wt % POSS) indicated that the crystals of POSS were arranged evenly in the phenolic matrix; the self‐assembled array of POSS crystals was also confirmed by AFM. This phenomenon was consistent with the FTIR spectroscopy and WAXD analyses. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1127–1136, 2004     

Synthesis and properties of a cyanate ester containing dicyclopentadiene(II)

A 2,6‐dimethyl phenol‐dicyclopentadiene novolac (DCPDNO) was synthesized from dicyclopentadiene and 2,6‐dimethyl phenol, and the resultant DCPDNO was reacted with cyanogen bromide into 2,6‐dimethyl phenol‐dicyclopentadiene cyanate ester (DCPDCY). The structures of the novolac and cyanate ester were confirmed with Fourier transform infrared spectroscopy, elemental analysis, mass spectrometry (MS), and nuclear magnetic resonance. For the purpose of increasing the mobility of residual DCPDCY during the final stage of curing and achieving a complete reaction of cyanate groups, a small quantity of a monofunctional cyanate ester, 4‐tert‐butylphenol cyanate ester (4TPCY), was added to DCPDCY to form the cyanate ester copolymer. The synthesized DCPDCY was then cured with 4TPCY at various molar ratios. The thermal properties of the cured cyanate ester resins were studied with dynamic mechanical analysis, dielectric analysis, and thermogravimetric analysis. These data were compared with those of the commercial bisphenol A cyanate ester system. Compared with the bisphenol A cyanate ester system, the cured DCPDCY resins exhibited lower dielectric constants (2.52–2.67 at 1 GHz), dissipation factors (0.0054–0.0087 at 1 GHz), glass‐transition temperatures (261–273 °C), thermal stability (5% degradation temperature at 406–450 °C), thermal expansion coefficients (4.8–5.78 × 10^?5/°C before the glass‐transition temperature), and moisture absorption (0.8–1.1%). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 671–681, 2005     

Stable second‐order NLO semi‐IPN system based on bipyridine‐containing polyimide and alkoxysilane dye

An organosoluble polyimide based on bipyridyl moiety and an alkoxysilane dye have been developed for second‐order non‐linear optics (NLOs). This bipyridine‐containing polyimide exhibits a glass transition temperature of 254°C and a degradation temperature of 400°C. An NLO‐active semi‐interpenetrating network (IPN) system was prepared by blending the polyimide with the alkoxysilane dye via in situ sol‐gel process of alkoxysilane. The selection of this bipyridine‐containing polyimide as the polymeric matrices provides improved solubility and thermal stability, and most importantly enhanced intermolecular interactions. No aggregation of the NLO chromophores in the polyimide matrices was observed through morphology and NLO studies. Under the limitation of chromophore degradation at elevated temperatures, the pristine poled/cured alkoxysilane dye exhibits poorer long‐term stability. By introducing the polyimide upon a silica network by the semi‐IPN system, randomization of the oriented chromophores can be effectively suppressed. Using in situ contact poling, the r₃₃ coefficients of 2.2–17.0 pm/V were obtained for the optically clear semi‐IPN NLO materials. Excellent temporal stability (100°C) was also achieved for these semi‐IPN materials. Copyright © 2005 John Wiley & Sons, Ltd.     

Side-mode suppression and wavelength controltolerance for sampled grating based DWDM laser arrays

Sampled grating DBR (SGDBR) based laser arrays were demonstrated to be feasible for realizing monolithically integrated DWDM sources. In order to ease the post-fabrication wavelength control for SGDBR laser arrays, the influence of the sampling duty cycle and the difference of reflection peak spacing is analyzed and investigated experimentally for achieving the best side-mode suppression ratio (SMSR) of a SGDBR laser array. It is found that such type of laser arrays can have good tolerance on the mirror misalignment. We demonstrated arrays with uniform wavelength combs of 32 wavelengths in 0.8 nm wavelength spacing. Both high SMSR and accurate wavelength registration are achieved for all lasers in an array. We also demonstrated 16-wavelength laser arrays of 50 GHz spacing whose wavelengths are aligned to the ITU grid with single-electrode operation.     

An open-loop control scheme for minimization of residual vibrations of a flexible robot

The aim of this study is to develop a practical control scheme, called the three-step input method, whereby a flexible robot arm is moved from one position to another with a minimum of residual vibration when the arm reaches its defined endpoint. This work is concerned with defining a simple practical method to utilize step inputs to achieve optimum response. The optimum response is achieved by using a self-adjusting input command function that is obtained during real-time processing. The practicality of this control scheme is demonstrated by using an analog computer to simulate a simple flexible robot and conventional servo controller. The experiments focus on point-to-point movement. Also, this method required little computational effort through the intelligent use of conventional servo control technology and the robot's vibration characteristics.