A novel oligothiophene derivative as a hole‐transport with emitting material for OLED

A novel oligothiophene derivative containing the triphenylamine moiety with high glass transition temperature (T_g; 135 °C), 5,5′‐{bis[4‐di(4‐thiophenyl)amino]phenyl}‐2,2′‐bithiophene (TTPA‐dimer) was synthesized by the dimerization of tris[4‐(2‐thienyl)phenyl]amine (TTPA) with a palladium catalysis. Some types of electroluminescent (EL) devices that use the amorphous material for a hole‐ and an electron‐transporting with an emitting layer were fabricated. These devices emitted a bright green‐yellowish light (λ_emi; around 510 nm) with a small full width at half maximum (FWHM) rather than that of Alq₃. The single layer EL device showed a maximum luminance of 221 cd/m² at 8 V (0.06 lm/W at 100 cd/m²). On the other hand, the double layer (TTPA‐dimer/Alq₃) EL device that used Alq₃ as the electron transport material was increased up to 10830 cd/m² at 12 V (0.89 lm/W at 300 cd/m²) and with a lower turn‐on voltage (3.2 V at 0.1 cd/m²) than other types of EL devices. Copyright © 2003 John Wiley & Sons, Ltd.     

Dual effect of oxidative stress on NF-kappakB activation in HeLa cells

Reactive oxygen species (ROS) has been implicated as an inducer of NF-kappaB activity in numbers of cell types where exposure of cells to ROS such as H(2)O(2) leads to NF-kappaB activation. In contrast, exposure to oxidative stress in certain cell types induced reduction of tumor necrosis factor (TNF)- induced NF-kappaB activation. And various thiol-modifying agents including gold compounds and cyclopentenone prostaglandins inhibit NF-kappaB activation by blocking IkappaB kinase (IKK). To understand such conflicting effect of oxidative stress on NF- kappakB activation, HeLa cells were incubated with H(2)O(2) or diamide and TNF-induced expression of NF-kappaB reporter gene was measured. NF-kappaB activation was significantly blocked by these oxidizing agents, and the inhibition was accompanied with reduced nuclear NF-kappaB and inappropriate cytosolic IkappaB degradation. H(2)O(2) and diamide also inhibited IKK activation in HeLa and RAW 264.7 cells stimulated with TNF and lipopolysaccharide, respectively, and directly blocked IKK activity in vitro. In cells treated with H(2)O(2) alone, nuclear NF-kappaB was induced after 2 h without detectable degradation of cytosolic IkappaBalphaa or activation of IKK. Our results suggest that ROS has a dual effect on NF-kappaB activation in the same HeLa cells: it inhibits acute IKK-mediated NF-kappakB activation induced by inflammatory signals, while longer-term exposure to ROS induces NF-kappaB activity through an IKK-independent pathway.     

Improved expression by cytomegalovirus promoter/enhancer and behavior of vascular endothelial growth factor gene after myocardial injection of naked DNA

Direct injection of the vascular endothelial growth factor (VEGF) gene plasmid DNA into the myocardium was shown to induce development of new blood vessels to increase the circulation in the heart of patients with coronary artery diseases. However, such angiogenic gene therapy (via naked DNA) was limited by low level of gene expression. Furthermore, the temporal and spatial characteristics of VEGF gene transfer in the heart are not known. In this study, we demonstrated that a plasmid vector, containing the human cytomegalovirus immediate early (HCMV IE) promoter and enhancer, induces greater expression of gene in the rat heart monitored by gene fused to the chloramphenicol acetyl transferase (CAT) reporter, than four different viral and cellular promoters. Interestingly, expression of VEGF121 protein showed an earlier peak, a shorter duration, and a wider distribution than that of CAT only. Therefore, a plasmid vector with an HCMV IE promoter/enhancer provides clear advantages over other previously developed plasmids. Furthermore, expression profile of VEGF121 gene may provide useful information in the design of angiogenic gene therapy in the heart.     

Modeling drop shape on contaminated surfaces or surfaces with physical structures

Surface contaminants are commonly found on films. They get transferred to the surface from incompletely cured silicone liners on the films or owing to migration of additives to the surface from within the film. During the process of ink jet printing (a noncontact printing process), surface contamination affects the shape of the drops (causing the formation of fingers and crescents) and hence image quality. This study uses modeling methods to examine how such surface contamination affects the drops shapes. Subsequently, it models the effect of surface structures (pits) on the drop shape. This study explores how image quality can be controlled in the presence of surface contamination and surface structures.     

Enantiomer separation of a novel aminothiazolecarboxamide fungicide using polysaccharide-derived chiral stationary phases

The direct enantioseparation of a novel aminothiazolecarboxamide fungicide, ethaboxam, on polysaccharide-derived chiral stationary phases (CSPs) is described. Good resolution is achieved with several polysaccharide-derived CSPs. Chiralcel OD (OD-H) and Chiralpak AS are excellent for direct enantiomer separation of ethaboxam. The elution behavior and the effects of eluent composition on the resolution of ethaboxam are also investigated. Furthermore, the mechanism for chiral recognition using molecular mechanics is discussed.     

Synthesis and reactivity of 1,2-bis(chlorodimethylgermyl)carborane and 1,2-bis(bromodimethylstannyl)carborane

The 1,2-bis(chlorogermyl)- (1) and 1,2-bis(bromostannyl)carborane (2) have been prepared by the reaction of dilithio-o-carborane with Me(2)GeCl(2) and Me(2)SnBr(2), respectively. Compounds 1 and 2 are found to be good precursors for the synthesis of a variety of cyclization compounds. The Wurtz-type coupling reaction of 1 and 2 using sodium metal afforded the four-membered digerma compound 3 and five-membered tristanna compound 4, respectively. The salt elimination reactions of 1 and 2 using Li(2)N(t)Bu and Li(2)PC(6)H(5) afforded the cyclic products [structure: see text]. The 1,2-bis(dimethylgermyl)carborane 9 and 1,2-bis(dimethylstannyl)carborane 10 were prepared by the reaction of 1 and 2 with sodium cyanoborohydride. The reactions of 9 and 10 with Pd(PPh(3))(4) afforded the bis(germyl)palladium 12 and bis(stannyl)palladium 13 complexes, respectively.     

Selective Recognition of Calcium Ion through Liquid Membrane

The mole transport rate of alkaline earth metal ions through a bulk liquid membrane and a supported liquid membrane using a series of proton diionizable acyclic polyethers was measured. Among alkaline earth metal ions, the calcium ion was observed to be selectively transported in both single and competitive transport experiments. Potentiometric titration and solution calorimetric titration also gave calcium selectivity over other alkaline earth metal ions. Acyclic polyether bearing a diethylene glycol unit andn-tetradecyl lipophilic chain at the α position of carboxylic acid affords the best selectivity for the calcium ion in bulk and supported liquid membranes.     

Synthesis and Characterization of Fluoro- and Chloro- bimetallic Alkoxides as Precursors for Luminescent Metal Oxide Materials via Sol-Gel Technique

Heterobimetallic alkoxides are broadly recognized as versatile precursors for luminescence materials, and efforts are being made to develop novel routes by applying the concept of geometrical molecular design, for their synthesis and to design a single source precursor suited to photoluminescent materials. Novel and new series of bimetallic alkoxides has been prepared by metathesis route. They exhibit a lower sensitivity towards hydrolysis and so they are easier to handle as compared to other alkoxides. All the compounds were characterized by elemental analysis, FT-IR and multinuclear NMR spectroscopies. FT-IR revealed that the molecular structure of these metal alkoxides was retained to a large extent in 4 ： 1 halogenated alcohol-benzene solution. The heteronuclear NMR spectroscopy provided useful information about chemical shifts for better understanding the likely structure based on interactions with their coordinate metals. The mass spectra show similar types of fragmentation pattern. SEM-EDS analyses showed consistency with the formulation. XRD patterns show an enhanced homogeneity at high temperature. TGA measurements show that thermal decomposition occured in steps that depended entirely on the chemical compositions and the synthesis routes. SEM observation reveals that the morphology and particle size strongly depend on synthesis routes for their precursors.     

Imide-siloxane block copolymer/silica hybrid membranes: preparation, characterization and gas separation properties

Imide-siloxane block copolymer/silica hybrid membranes with covalent bonds were prepared via sol–gel reaction. The structural informations of these hybrid membranes were obtained by using Fourier transform-infrared spectrometry (FT-IR), ²⁹Si nuclear magnetic resonance (²⁹Si NMR), XPS and thermogravimetric analysis (TGA). The gas separation properties of the hybrid membranes were also investigated in terms of organosiloxane (PDMS) or silica content at various temperatures. In the hybrids, the addition of PDMS phase increased the permeabilities of gases such as He, CO₂, O₂, and N₂, indicating that the gas transport occurred mainly through rubbery organic matrix. Meanwhile, the PDMS phase contributed the decreased gas selectivities to nitrogen but the reduction in selectivities was very small in comparison with other siloxane containing polymeric membranes. This might be due to the restriction of chain mobility by the existence of inorganic component such as silica network in the hybrids. Additionally, the increase of silica content in these hybrid membranes considerably retarded the falling-off of gas selectivity at elevated temperature. The increase of silica content in hybrid membranes resulted in well-formed silica networks and hence these inorganic components restricted the plasticization of organic matrix by the thermal segmental motion of organic components, leading to preventing the large decrease of the gas selectivity.     

Ruthenium-catalyzed reductive cyclization of nitroarenes with trialkylamines leading to quinolines

Nitroarenes react with trialkylamines in the presence of a catalytic amount of a ruthenium catalyst together with tin(II) chloride dihydrate at 180 °C in an aqueous medium (toluene–H₂O) to afford the corresponding quinolines in moderate to good yields. The catalytic pathway seems to be proceeded via a sequence involving initial reduction of nitroarenes to anilines, alkyl group transfer from alkylamines to anilines to form an imine, dimerization of imine, and heterocyclization.