Bestimmung der organischen Bestandteile von Aerosolpartikeln aus Reinluft

Zusammenfassung Das für die Untersuchung der organischen Bestandteile von Reinluft-Aerosolteilchen entwickelte Analysenverfahren beruht auf der Kombination von klassischen Trennmethoden mit Verfahren der Dünnschicht- und der Gas-Chromatographie bzw. der Gas-Chromatographie/Massenspektrometrie. Im Gegensatz zu älteren Verfahren werden alle vorkommenden organischen Verbindungen, soweit sie äther-löslich sind bzw. in eine äther-lösliche Form überführt werden können, erfaßt. Die verfahrensbedingten Substanzverluste sind so gering, daß schon 100 mg Aerosolteilchen ausreichend sind für die Analyse der organischen Bestandteile (bei ca. 10% organischer Substanz). Ein Anwendungsbeispiel für das Analysenverfahren wird gegeben. Best. von Organ. Substanzen in Luft; Chromatographie, Dünnschicht/Chromatographie, Gas/Massenspektrometrie; Aerosolbestandteile in Reinluft.

---

Determination of the organic constituents of aerosol particles from clean air

The method developed for analysing the organic matter of atmospheric particles from clean air is based on the combination of classical separation procedures and thinlayer chromatography together with gas chromatography and gas chromatography/mass spectrometry, respectively. In contrast to methods published earlier, all organic compounds present can be detected (if they are or can be converted to compounds soluble in ether). The loss of organic matter inherent in the analytical procedure is small enough to allow the determination of the organic constituents of 100 mg of aerosol particles (with about 10% organic matter). An example for the application of the analytical method is presented.

     

A novel oligothiophene derivative as a hole‐transport with emitting material for OLED

A novel oligothiophene derivative containing the triphenylamine moiety with high glass transition temperature (T_g; 135 °C), 5,5′‐{bis[4‐di(4‐thiophenyl)amino]phenyl}‐2,2′‐bithiophene (TTPA‐dimer) was synthesized by the dimerization of tris[4‐(2‐thienyl)phenyl]amine (TTPA) with a palladium catalysis. Some types of electroluminescent (EL) devices that use the amorphous material for a hole‐ and an electron‐transporting with an emitting layer were fabricated. These devices emitted a bright green‐yellowish light (λ_emi; around 510 nm) with a small full width at half maximum (FWHM) rather than that of Alq₃. The single layer EL device showed a maximum luminance of 221 cd/m² at 8 V (0.06 lm/W at 100 cd/m²). On the other hand, the double layer (TTPA‐dimer/Alq₃) EL device that used Alq₃ as the electron transport material was increased up to 10830 cd/m² at 12 V (0.89 lm/W at 300 cd/m²) and with a lower turn‐on voltage (3.2 V at 0.1 cd/m²) than other types of EL devices. Copyright © 2003 John Wiley & Sons, Ltd.     

Metastasis-suppressor KAI1/CD82 induces homotypic aggregation of human prostate cancer cells through Src-dependent pathway

To investigate the functional role of KAI1/CD82, a metastasis suppressor for human prostate cancer, in the regulation of homotypic cell adhesion, we transfected KAI1 cDNA into DU 145 human prostate cancer cells and established stable transfectant clones with high KAI1/CD82 expression. The KAI1 transfectant cells exhibited significantly increased homotypic cell aggregation in comparison with the control transfectant cells. This aggregation of the KAI1 transfectants was further enhanced upon exposure to anti-CD82 antibody, suggesting that KAI1/CD82 may be involved in the intracellular signaling for the cell adhesion. Among several signal pathway inhibitors tested, PP1, an inhibitor of Src family kinases, significantly suppressed homotypic aggregation of the KAI1 transfectant cells. Ligation of KAI1/CD82 with anti-CD82 antibody increased endogenous Src kinase activity of the KAI1 transfectant cells. When different types of src expression constructs were retransfected into the KAI1-transfected DU 145 cells, kinase-negative mutant src transfectant cells exhibited much lower homotypic aggregation than the mock cells transfected with an empty vector. Moreover, homotypic aggregation of the mutant src transfectant cells was not enhanced by KAI1/CD82 ligation with anti- CD82 antibody. These results suggest that Src mediates the intracellular signaling pathway of KAI1/CD82 for the induction of homotypic adhesion of human prostate cancer cells.     

Poly(dimethylsiloxane) microchip for precolumn reaction and micellar electrokinetic chromatography of biogenic amines

We have demonstrated that precolumn derivatization and capillary electrophoresis separation on a poly(dimethylsiloxane) (PDMS) microchip can be realized as efficient as those on glass microchips. In an optimized condition of micellar electrokinetic chromatography (MEKC), using 25 mM sodium borate buffer (pH 10.0) with 25 mM sodium dodecyl sulfate (SDS) and 5% v/v methanol, the electroosmotic flow in an oxidized PDMS microchip is stabilized within 3% for days. By employing a fluorometric derivatization with o-phthaldialdehyde (OPA) in an optimally designed reaction chamber, four most important biogenic amines occurring in foods, histamine, tyramine, putrescine, and tryptamine, are quantitatively determined in less than 1 min at the levels applicable to real samples. The migration behaviors of anionic OPA-derivatized biogenic amines under the MEKC conditions are analyzed, and it has been found that under our separation conditions, the electrophoretic mobility of the SDS micelles is significantly greater than those of the anions in the aqueous phase. The channel manifold in a PDMS substrate is fabricated using replica molding against a thick photoresist, SU-8, pattern generated by photolithography. The plate with the microchannel pattern is strongly, irreversibly bonded to another PDMS plate by using a new bonding technique, which employs surface oxidation by corona discharge generated from a cheap, handy source, Tesla coil.     

Modeling drop shape on contaminated surfaces or surfaces with physical structures

Surface contaminants are commonly found on films. They get transferred to the surface from incompletely cured silicone liners on the films or owing to migration of additives to the surface from within the film. During the process of ink jet printing (a noncontact printing process), surface contamination affects the shape of the drops (causing the formation of fingers and crescents) and hence image quality. This study uses modeling methods to examine how such surface contamination affects the drops shapes. Subsequently, it models the effect of surface structures (pits) on the drop shape. This study explores how image quality can be controlled in the presence of surface contamination and surface structures.     

Synthesis,renal vasodilator and dopamine-sensitive adenylate cyclase activities of O-Methyl derivatives of 6-chloro-2,3,4,5-tetr ahydro-1-(4-hydroxyphenyl)-1H-3-benzazepin-7,8-diol (SK&F 82526)

The three possible mono-O-methyl derivatives of 6-chloro-2,3,4,5-tetrahydro-1-(4-hydroxyphenyl)-1H-3-benzazepin-7,8-diol (SK&F 82526) ( 1 ) have been synthesized to facilitate the isolation and characterization of metabolites of this compound and for biological testing. The syntheses generally involved preparation of appropriately substituted benzaldehydes, conversion of these to phenylacetic acids and use of these to N-acylate arylethanolamines. The phenylacetamides thus formed were reduced to amines and these were deprotected and cyclized to the desired final products. In one case deprotection followed cyclization. These compounds were tested as activators of dopamine-sensitive adenylate cyclase (a measure of DA-1 agonist activity) and as renal vasodilators. All three O-methyl derivatives were much less potent than 1 in cyclase activation and as renal vasodilators. Weak inhibition of adenyl cyclase was also observed for all three compounds and one showed weak renal vasoconstrictor activity. Preliminary investigation of the metabolism of 1 disclosed that two of the three monomethoxy compounds were formed in trace amounts in the rat and the dog. In a related investigation, the trimethoxy derivative of 1 was subjected to acid-catalyzed hydrolysis conditions. The relative ease of cleavage of methoxy groups was 7 > > 4′ > 8.     

Untersuchungen über ternäre Chalkogenide. XXIV. Zur Struktur des TlGaSe2

On Ternary Chalcogenides. XXIV. The Structure of TlGaSe₂ TlGaSe₂ is monoclinic with a = 10.772(3), b = 10.771(5), c = 15.636(8) Å, ß = 100.6(3)°, Z = 16, space group Cc. The refinement yielded an R value of 0.082 for 1366 unique observed reflections (MoKα). The compound crystallizes with a layer structure with two anion layers perpendicular to c* in the unit cell. The structural motive of the layers are large corner-linked Ga₄Se₁₀- tetraeder consisting of four corner-linked GaSe₄ tetrahedra. Two adjacent layers are turned relative to each other by 90°. They are kept together by Tl¹⁺ ions, which are situated on straight lines parallel to the edges of the Ga₄Se₁₀ groups. They are surrounded by six selenium atoms forming trigonal-prismatic TlSe₆ polyhedra. 4₂ screw-axes within the layers are the reason for a strongly pronounced pseudo tetragonal symmetry. Different possibilities of stacking cause a onedimensional disorder along the c* direction. The relations between the TlGaSe₂ type and the TlSe type and also the high-pressure modifications of some compounds with the TlGaSe₂ structure are discussed.     

Enantiomer separation of a novel aminothiazolecarboxamide fungicide using polysaccharide-derived chiral stationary phases

The direct enantioseparation of a novel aminothiazolecarboxamide fungicide, ethaboxam, on polysaccharide-derived chiral stationary phases (CSPs) is described. Good resolution is achieved with several polysaccharide-derived CSPs. Chiralcel OD (OD-H) and Chiralpak AS are excellent for direct enantiomer separation of ethaboxam. The elution behavior and the effects of eluent composition on the resolution of ethaboxam are also investigated. Furthermore, the mechanism for chiral recognition using molecular mechanics is discussed.     

Beiträge zur Chemie des Phosphors. 111. 1,2-Dichlor-1,2-di-tert-butyldiphosphan

Contributions to the Chemistry of Phosphorus. 111. 1,2-Dichloro-1,2-di-tert-butyl-diphosphane The reaction of tri-tert-butyl-cyclotriphosphane, (t-BuP)₃, with phosphorus(V) chloride (molar ratio 1:2) leads to the title compound Cl(t-Bu)P? P(t-Bu)Cl ( 1 ), which is remarkably stable against disproportionation reactions. As the first 1,2-dichloro-1,2-diorganyldiphosphane, 1 has been isolated in a pure state and was thoroughly characterized. At room temperature, 1 exists in a mixture of the d,l and meso form (about 20:80). The mutual repulsion of the negative polarized Cl atoms and their preferred gauche arrangement to the free electron pairs of neighboured P atoms leads to a gauche-conformation of the lone electron pairs in the d,l- and to a trans-conformation in the meso-configuration.     

Synthesis and reactivity of 1,2-bis(chlorodimethylgermyl)carborane and 1,2-bis(bromodimethylstannyl)carborane

The 1,2-bis(chlorogermyl)- (1) and 1,2-bis(bromostannyl)carborane (2) have been prepared by the reaction of dilithio-o-carborane with Me(2)GeCl(2) and Me(2)SnBr(2), respectively. Compounds 1 and 2 are found to be good precursors for the synthesis of a variety of cyclization compounds. The Wurtz-type coupling reaction of 1 and 2 using sodium metal afforded the four-membered digerma compound 3 and five-membered tristanna compound 4, respectively. The salt elimination reactions of 1 and 2 using Li(2)N(t)Bu and Li(2)PC(6)H(5) afforded the cyclic products [structure: see text]. The 1,2-bis(dimethylgermyl)carborane 9 and 1,2-bis(dimethylstannyl)carborane 10 were prepared by the reaction of 1 and 2 with sodium cyanoborohydride. The reactions of 9 and 10 with Pd(PPh(3))(4) afforded the bis(germyl)palladium 12 and bis(stannyl)palladium 13 complexes, respectively.