Secondary isotope effects in liquid chromatography behaviour of 2H and 3H labelled solutes and solvents

The separation of solutes that differ only in the extent of isotopic substitution of their hydrogen atoms, using either mixtures of isotopically non-modified or perdeuterated solvents as mobile phases, is described. The occurrence of a secondary isotope effect is demonstrated in reversed-phase liquid chromatography, which is independent of the nature of the stationary phase (different octadecyl-bonded silicas, an embedded alkylamide-bonded silica, as well as one polymeric stationary phase were tested), and the water content and the nature of organic modifier of the mobile phase. The separation of 24 structurally different isotopologue pairs (apolar compounds and polar compounds with exchangeable or non-exchangeable hydrogen atoms) is examined using reversed-phase liquid chromatography. It is found that the greater the number of isotopically substituted hydrogen atoms in a given organic solute, the better is the separation of a particular isotopologue pair. The single secondary isotope effect is shown to be dependent on the number of isotopic substitutions. The greater the number of these substitutions, the smaller is the single isotope effect. The single secondary isotope effect is higher for aromatic hydrocarbons than for aliphatic hydrocarbons. A secondary isotope effect is also observed in chiral chromatography and normal-phase liquid chromatography, as well as on changing the nature of the substituting isotope, i.e.: tritium instead of deuterium. Thus, we have demonstrated that the total secondary isotopic effect for hydrogen/tritium is higher than for hydrogen/deuterium. This isotope effect involves only the consequences of changes in interactions due to nuclear motions. Overall this study confirms the predominance of hydrophobic effects in retention processes in reversed-phase liquid chromatography. In reversed-phase liquid chromatography, a secondary isotope effect related to mobile phase composition is also observed. The behaviour of deuterium oxide and water in mobile phases of the same composition (%, w/w) is compared. Independent of the nature of the organic modifier (methanol, acetonitrile or ethanol), the effect of replacing H2O with 2H2O in the mobile phase, is an increase in the retention factors and an improvement in the chromatographic resolution of isotopologue pairs. This increase in the resolution is not accompanied by a change in the chromatographic selectivity. The measurement of liquid-liquid extraction coefficients proves that the effect is mainly due to the modification of the phase ratio. In general the effect of 2H-labelled solvents (2H2O and C2H3CN) as mobile phase components, compared to their isotopically non-modified isomers, can be rationalized on the basis of their lower polarisabilities. Overall the use of perdeuterated rather than isotopically non-modified solvents as mobile phase components leads to the most efficient separation systems.     

13C NMR studies of the electronic structure of low-spin iron(III) tetraphenylchlorin complexes

A series of low-spin six-coordinate (tetraphenylchlorinato)iron(III) complexes [Fe(TPC)(L)2]+/- (L = 1-MeIm, CN-, 4-CNPy, and (t)BuNC) have been prepared, and their (13)C NMR spectra have been examined to reveal the electronic structure. These complexes exist as the mixture of the two isomers with the (d(xy))2(d(xz), d(yz))3 and (d(xz), d(yz))4(d(xy))1 ground states. Contribution of the (d(xz), d(yz))4(d(xy))1 isomer has increased as the axial ligand changes from 1-MeIm, to CN(-) (in CD2Cl2 solution), CN- (in CD(3)OD solution), and 4-CNPy, and then to tBuNC as revealed by the meso and pyrroline carbon chemical shifts; the meso carbon signals at 146 and -19 ppm in [Fe(TPC)(1-MeIm)2]+ shifted to 763 and 700 ppm in [Fe(TPC)(tBuNC)2]+. In the case of the CN- complex, the population of the (d(xz), d(yz))4(d(xy))1 isomer has increased to a great extent when the solvent is changed from CD2Cl2 to CD3OD. The result is ascribed to the stabilization of the d(xz) and d(yz) orbitals of iron(III) caused by the hydrogen bonding between methanol and the coordinated cyanide ligand. Comparison of the 13C NMR data of the TPC complexes with those of the TPP, OEP, and OEC complexes has revealed that the populations of the (d(xz), d(yz))4(d(xy))1 isomer in TPC complexes are much larger than those in the corresponding TPP, OEC, and OEP complexes carrying the same axial ligands.     

Impact of carbamylation on type I collagen conformational structure and its ability to activate human polymorphonuclear neutrophils

Carbamylation by urea-derived cyanate is a posttranslational modification of proteins increasing during chronic renal insufficiency, which alters structural and functional properties of proteins and modifies their interactions with cells. We report here the major structural alterations of type I collagen induced by carbamylation. Biophysical methods revealed that carbamylated collagen retained its triple-helical structure, but that slight changes destabilized some regions within the triple helix and decreased its ability to polymerize into normal fibrils. These changes were associated with the incapacity of carbamylated collagen to stimulate polymorphonuclear neutrophil oxidative functions. This process involved their interaction with LFA-1 integrin, but no subsequent p(125)FAK phosphorylation. Carbamylation of collagen might alter interactions between collagen and inflammatory cells in vivo and interfere with the normal remodeling of extracellular matrix, thus participating in the pathophysiological processes occurring during renal insufficiency.     

Atmospheric pressure photoionization coupled to porous graphitic carbon liquid chromatography for the analysis of globotriaosylceramides. Application to Fabry disease

Globotriaosylceramides (Gb(3)) are biological compounds implicated in Fabry disease, a lysosomal storage disease due to the deficient activity of alpha-D-galactosidase A, which results in an accumulation of Gb(3) in many organs. The naturally occurring samples are composed of mixtures of several molecular species differing by the structure of the alkyl chains and the nature of the sphingoid base. Atmospheric pressure photoionization mass spectrometry (APPI-MS) proved to be an efficient method for the analysis of globotriaosylceramide molecular species, both in direct injection and by coupling with liquid chromatography (LC). In the positive ion mode, in-source fragmentations yield very precious information that can be used to determine the structure of the alkyl chains. In the negative ion mode, the chloroform solvent participates to the analyte ionization by forming an adduct with chloride ions generated in situ. Combination of LC on a Porous Graphitic Carbon stationary phase and APPI-MS allowed the detection of a great number of species from biological samples isolated from Fabry patients. This method could be an interesting analytical tool for the biochemical investigation of (sphingo) lipid metabolism.     

Damage induced in garnets by heavy ion irradiations: a study by optical spectroscopies

The damage induced by heavy-ion irradiation has been studied in yttrium iron garnet (Y₃Fe₅O₁₂ or YIG) films, doped with Ca, Tb and Tm, grown by liquid-phase epitaxy on gadolinium gallium garnet (Gd₃Ga₅O₁₂ or GGG) substrates. Irradiations of doped-YIG epitaxial films and GGG substrates with 36-MeV ¹⁸³W and 12-MeV ¹⁹⁷Au ions were applied for fluences between 1 × 10¹³ and 3 × 10¹⁵ cm^–2 near room temperature. The radiation damage was monitored by micro-Raman spectroscopy and UV–visible optical absorption spectroscopy. Raman spectra revealed that amorphisation was achieved in YIG for both ions, whereas a high lattice disorder was induced in GGG without reaching amorphisation for the Au ion irradiation. Raman spectra also showed that a major damage of the tetrahedral sites was induced in GGG, as previously found for YIG. It is concluded that with such ions reaching the stopping power threshold of track formation in YIG and GGG the observed rate of amorphisation may result from a combination of electronic and nuclear energy losses as calculated using the unified thermal spike model.     

SmI2-mediated cross-coupling of nitrones with β-silyl acrylates: synthesis of (+)-australine

The SmI(2)-mediated cross-coupling of nitrones with β-silyl-α,β-unsaturated esters, followed by zinc reduction, allows an efficient and highly diastereoselective preparation of β-silyl lactams, which are precursors of β-hydroxy lactams through Tamao-Fleming oxidation. By applying the method to a cyclic, carbohydrate-derived nitrone, a new synthesis of (+)-australine has been realized in only 11 steps and in 21% overall yield from L-xylose.     

“In situ” extraction of essential oils by use of Dean–Stark glassware and a Vigreux column inside a microwave oven: a procedure for teaching green analytical chemistry

One of the principal objectives of sustainable and green processing development remains the dissemination and teaching of green chemistry in colleges, high schools, and academic laboratories. This paper describes simple glassware that illustrates the phenomenon of extraction in a conventional microwave oven as energy source and a process for green analytical chemistry. Simple glassware comprising a Dean-Stark apparatus (for extraction of aromatic plant material and recovery of essential oils and distilled water) and a Vigreux column (as an air-cooled condenser inside the microwave oven) was designed as an in-situ extraction vessel inside a microwave oven. The efficiency of this experiment was validated for extraction of essential oils from 30 g fresh orange peel, a by-product in the production of orange juice. Every laboratory throughout the world can use this equipment. The microwave power is 100 W and the irradiation time 15 min. The method is performed at atmospheric pressure without added solvent or water and furnishes essential oils similar to those obtained by conventional hydro or steam distillation. By use of GC-MS, 22 compounds in orange peel were separated and identified; the main compounds were limonene (72.1%), β-pinene (8.4%), and γ-terpinene (6.9%). This procedure is appropriate for the teaching laboratory, does not require any special microwave equipment, and enables the students to learn the skills of extraction, and chromatographic and spectroscopic analysis. They are also exposed to a dramatic visual example of rapid, sustainable, and green extraction of an essential oil, and are introduced to successful sustainable and green analytical chemistry.     

Fabrication of thermoplastics chips through lamination based techniques

In this work, we propose a novel strategy for the fabrication of flexible thermoplastic microdevices entirely based on lamination processes. The same low-cost laminator apparatus can be used from master fabrication to microchannel sealing. This process is appropriate for rapid prototyping at laboratory scale, but it can also be easily upscaled to industrial manufacturing. For demonstration, we used here Cycloolefin Copolymer (COC), a thermoplastic polymer that is extensively used for microfluidic applications. COC is a thermoplastic polymer with good chemical resistance to common chemicals used in microfluidics such as acids, bases and most polar solvents. Its optical quality and mechanical resistance make this material suitable for a large range of applications in chemistry or biology. As an example, the electrokinetic separation of pollutants is proposed in the present study.     

On-chip electrochemical detection of CdS quantum dots using normal and multiple recycling flow through modes

A flexible hybrid polydimethylsiloxane (PDMS)-polycarbonate (PC) microfluidic chip with integrated screen printed electrodes (SPE) was fabricated and applied for electrochemical quantum dots (QDs) detection. The developed device combines the advantages of flexible microfluidic chips, such as their low cost, the possibility to be disposable and amenable to mass production, with the advantages of electrochemistry for its facility of integration and the possibility to miniaturize the analytical device. Due to the interest in biosensing applications in general and particularly the great demand for labelling alternatives in affinity biosensors, the electrochemistry of cadmium sulfide quantum dots (CdS QDs) is evaluated. Square wave anodic stripping voltammetry (SWASV) is the technique used due to its sensitivity and low detection limits that can be achieved. The electrochemical as well as the microfluidic parameters of the developed system are optimized. The detection of CdS QDs in the range between 50 to 8000 ng mL(-1) with a sensitivity of 0.0009 μA/(ng mL(-1)) has been achieved. In addition to the single in-chip flow through measurements, the design of a recirculation system with the aim of achieving lower detection limits using reduced volumes (25 μL) of sample was proposed as a proof-of-concept.