Benefits of high resolution IC-ICP-MS for the routine analysis of inorganic and organic arsenic species in food products of marine and terrestrial origin

A recently developed and validated method for simultaneous determination of 17 inorganic and organic arsenic compounds in marine biota has been successfully applied to routine analysis of different food products, including fish, shellfish, edible algae, rice, and other types of grain. During one year, approximately 250 food samples were analyzed, mostly fish and rice. Long-term stability and robustness of the system was observed and reproducible results for certified reference materials were ensured by means of control charts. The separation was performed by ion-pair chromatography on an anion-exchange column to separate anionic, neutral, and cationic arsenic species in one chromatographic run. Hyphenation to ICP–MS allowed element-specific and sensitive detection of the different arsenic species with a detection limit as low as 8 ng As L^–1 in the sample extract, which is equivalent to 2 ng As g^–1 in the original sample. Special emphasis was laid on the analysis of marine algae and rice samples. These food types can contain elevated levels of the very toxic inorganic arsenic species (up to 90% in rice) and therefore are the focus of interest in the food industry. In marine algae, inorganic arsenic was mainly present as arsenate whereas in rice arsenite predominated.     

Design of highly active heterogeneous palladium catalysts for the activation of aryl chlorides in Heck reactions

In situ generation of highly active palladium species by intermediate dissolution of Pd from solid supported catalysts has been demonstrated to be a very successful approach for the activation of aryl chlorides in Heck reactions. The new ‘heterogeneous’ Pd catalysts act as reservoir for molecular Pd species with unsaturated coordination sphere in solution. Crucial Pd leaching and re-deposition onto the support can be controlled by optimization of reaction conditions and by the properties of the catalysts. Pd is re-deposited onto the support at the end of the reaction. The catalysts, palladium supported on activated carbon, on various metal oxides or fluorides and Pd complexes in zeolites, are easy to prepare, though the preparation conditions are crucial. The catalysts convert all aryl bromides completely within minutes (TON 100,000). Aryl chlorides (even deactivated ones) are converted with high yields, within 2-6 h. The catalysts belong to the most active ones in Heck reactions at all (including best homogeneous systems) and fulfill all relevant requirements for practical applications in laboratory and industry.     

Preparation of RCM substrates for azepinoindole synthesis: reductive amination versus tetrahydro-γ-carboline formation

Treatment of N-(phenylsulfonyl)-2-vinyl-3-indolecarbaldehydes with primary aliphatic amines under mild reductive amination conditions leads to tetrahydro-γ-carbolines in high yield. The process can be suppressed by changing the protecting group at the indole nitrogen for a methoxymethyl group, thus allowing the preparation of RCM substrates for azepinoindole synthesis.     

Close-packed C(70)(3-) phases - synthesis, structure, and electronic properties

The high symmetry and resulting electronic degeneracy of the C(60)(3)(-) anion is viewed as the key molecular feature in the high superconducting transition temperatures of fulleride and oxidized fullerene systems. The experimental evaluation of this hypothesis requires the synthesis of face-centered cubic (fcc) trivalent fulleride anion salts derived from higher fullerenes such as C(70), which have thus far proved elusive with only stable A(1)C(70), A(4)C(70), and A(6)C(70) phases known. In this paper, we report the synthesis of fcc A(3)C(70) phases stabilized by size-matching the tetrahedral site with the sodium cation. The structures are strongly dependent on the cooling protocol due to the existence of metastable partially or completely orientationally disordered phases. EPR data indicate that the phases are metallic but not superconducting. The densities of states at the Fermi level appear too low to give superconductivity at above 5 K, consistent with recent observations that four electrons per C(70) anion are required for superconductivity. Size-matching on both the octahedral and tetrahedral sites is required for A(3)C(70) stability - K(2)CsC(70) is only stable at elevated temperature and Na(2)C(70) is unstable, the composition corresponding to C(70) and a sodium-rich trigonal phase.     

A new method for the quantitative analysis of organochlorine pesticides and polychlorinated biphenyls

A simple method is described for the quantitative determination of organochlorine pesticides and polychlorinated biphenyls (PCB's) in water at the sub-ppb level. A micro gas-phase extractor advantageously replaces other preconcentration and purification techniques. The extract is analyzed by capillary gas chromatography without further enrichment. The recovery at the ppb level was nearly 100% for organochlorine pesticides and more than 80% for PCB's. The complete procedure including sample preparation, steam distillation-extraction, and capillary gas chromatographic analysis is carried out in less than four hours.     

Synthesis and use of alpha-silyl-substituted alpha-hydroxyacetic acids

[reaction: see text] Rhodium-catalyzed oxygen transfer was used to generate benzyl 2-silyl-2-oxoacetates in good yields. The hydrogenation of these compounds led to chiral alpha-silyl-substituted alpha-hydroxyacetic acids. Resolution by means of HPLC using a chiral stationary phase afforded an enantiomerically pure representative of this class of compounds, which was successfully applied as a chiral ligand in an asymmetric aldol-type reaction.     

The use of comet assay data with a simple reaction mechanism to evaluate the relative effectiveness of free radical scavenging by quercetin, epigallocatechin gallate and N-acetylcysteine in UV-irradiated MRC5 lung fibroblasts

Comet assay data (tail DNA %) have been gathered for the concentration dependent role of three antioxidants (AOs); quercetin (Q), epigallocatechin gallate (EGCG) and N-acetylcysteine (NAC) in reducing UV-induced damage to DNA in normal fetal lung fibroblasts (MRC5). All three compounds demonstrate a concentration dependent reduction maximum with a pro-oxidant effect at higher (though not cytotoxic) concentrations. Manipulation of a simple 4-step reaction mechanism for free radical (FR) scavenging by AOs produced rate constant ratios which allowed the relative effectiveness (Q > EGCG > NAC) of the AOs to be evaluated.     

Speciation of cationic selenium compounds in Brassica juncea leaves by strong cation-exchange chromatography with inductively coupled plasma mass spectrometry

Strong cation-exchange chromatography (SCX-HPLC) was used in conjunction with inductively coupled plasma mass spectrometry (ICP-MS) to investigate cationic selenium species present in leaf extract of wild-type Brassica juncea supplemented with selenite. Total amount of Se accumulated by the leaves was found to be 352 microg g(-1). Cation-exchange solid-phase extraction (SCX-SPE) was used to pre-concentrate the cationic species present in the leaf extract. Methylselenomethionine (MeSeMet) and dimethylselenoniumproprionate (DMSeP) were synthesized and characterized by electrospray quadrupole time-of-flight MS (ESI-QTOF-MS). Laboratory synthesized and commercially available standards were used in chromatographic studies to identify the Se species in the leaf extract through retention time comparisons and standard addition method. Major cationic selenium species identified in the present study were MeSeMet and methylselenocysteine (MeSeCys) while selenomethionine (SeMet) was found in minor quantities.     

Electropolymerization of aminophthalic acids. I. Polymerization of 4-aminophthalic acid

4-Aminophthalic acid has been polymerized in almost quantitative yield to low molecular weight polymer by electrochemical initiation at a platinum anode. Systems involving the acid, amine salt, and the ammonium salt have been explored; the acid and/or the amine salt of the acid provides the best means of obtaining polymer. Maximum molecular weight is attained in a very short time at low current densities (～2 hr at 50 mA). Thermogravimetric data indicate a temperature stability comparable to polyamide-imide polymers (400°C). Long reaction times and high current densities decrease molecular weight and polymer yield.     

Synthesis of thiol chelating resins and their adsorption properties toward heavy metal ions

A series of chelating resins, derived from a macroreticular styrene-divinylbenzene (2%) copolymer beads grafted with various poly(ethylene glycols) HO? (? CH₂? CH₂? O? )_n? H(n = 0, 4, 9, 13) and containing thiol groups as chelating functions, have been synthesized in a three-step reaction sequence. The structure of the functionalized resins was confirmed by IR spectrophotometry, elemental analysis, and differential scanning calorimetry. The complexation behavior of these thiol resins was investigated towards Hg(II), Cu(II), and Pb(II) ions in aqueous solution by a batch equilibration technique. The influence of pH on adsorption capacity was also examined. The adsorption values for metal ions' intake followed the order Hg(II) > Cu(II) > Pb(II). The affinity of these polymers towards Hg(II) ions was so high that the total mercury level in the liquid decreased from 20 ppm to below 10 ppb after 2 h of treatment. Polymers can be regenerated by washing with a solution of hydrochloric acid (6N) and 10% by weight of an aqueous solution of thiourea. © 1994 John Wiley & Sons, Inc.