Synthesis,structure and cytotoxic activity of cobalt(II), nickel(II) and copper(II) chloride complexes with acetamidrazones

Co^II, Ni^II and Cu^II chloride complexes with acetamidrazone derivatives (L ¹ )–(L ⁸ ) have been prepared, by reacting the corresponding metal chloride with the ligand in a 1:2 ratio, and characterised by chemical analysis and physical measurements. The ligand behaviour and the geometry have been assigned on the basis of i.r. spectroscopy, electronic reflectance spectra and molar conductivity values and only, where possible, the geometry has been confirmed as octahedral by X-ray structure determination. Complexes cytotoxicity on a human cellular line of adenocarcinoma was also tested. Three of the complexes present a weak cytotoxicity in vitro.     

Two‐step synthesis of new 1,2,4,5‐tetrahydrospiro‐[3H‐2‐benzazepine‐3,4′‐piperidines] from 4‐iminopiperidines

New spiro[3H‐2‐benzazepine‐3,4′‐piperidines] and their precursors, N‐substituted 4‐allyl‐4‐N‐benzyl‐aminopiperidines, have been prepared as potential psychotic agents from readily available 4‐iminopiperidines, by a sequence of reactions that included nucleophilic addition of Grignard reagents and Bronsted acid‐mediated intramolecular cyclisation. Some of the compounds prepared have been tested in albine mice for spontaneous motor activity. All compounds prepared were characterized by ir and ¹H nmr spectroscopies and cg‐ms spectrometry.     

Electron spin relaxation in x-lithium phthalocyanine

Continuous-wave linewidths and spin susceptibilities, spin-spin relaxation rates (1/T2), and spin-lattice relaxation rates (1/T1) for two sources of x-LiPc were measured at 9.5 GHz between 15 and 298 K. Relaxation rates at 34 GHz were measured between 80 and 298 K. Room-temperature relaxation rates also were measured at 250 MHz, 1.9 GHz, and 2.76 GHz. The temperature dependences of linewidths and spin susceptibilities are characteristic of 1-D organic conductors. The ratio of populations of localized and delocalized electrons varies with sample preparation. For a single needle between 15 and about 200 K, 1/T2 is higher for the parallel orientation, but 1/T1 is higher for the perpendicular orientation, consistent with predictions based on dipolar interactions. Between about 60 and 150 K, which is the temperature regime in which spin susceptibility is changing rapidly with temperature, 1/T1 exhibits a non-monotonic dependence on temperature and is lower at 34 GHz than at 9.5 GHz. In other organic conductors, this dependence has been attributed to a bottleneck mechanism of relaxation. At higher temperatures, 1/T1 becomes less orientation-dependent. At room temperature, T1 increases rapidly between 250 MHz (3.0 micros) and 2.76 GHz (6.3 micros) and then shows less frequency dependence up to 34 GHz (9.8 micros). The relaxation rate near room temperature might have a substantial contribution from spin hopping perpendicular to the stacking axis of the molecules.     

Investigation of the neutral loss of a full amino acid mass during collision-induced dissociation of the b(3)+ ion derived from a model peptide containing a 4-aminobutyric acid residue

In a previous study we found that a dominant fragmentation pathway observed for collision-induced dissociation (CID) of b(3)+ derived from peptides with sequence AXAG, where X is gamma-aminobutyric acid (gammaAbu) or epsilon-aminocaproic acid (Cap), involved the loss of 89 mass units (u). A neutral loss of 89 u corresponded to the free acid mass of an alanine (A) residue. This specific pathway was studied in greater detail here using a series of A(gammaAbu)AG peptides with strategic positioning of (15)N, (13)C and (2)H isotope labels. Based on the extensive labeling, several possible routes to the net elimination of 89 u are proposed. One is based on initial elimination of either aziridinone or imine and CO, followed by opening of an oxazolinone, tautomerization and elimination of H2O. Another involves formation of an aziridinone by cleavage of the N-terminal amide bond, and transfer of O and H atoms to this fragment via an H-bonded ion-molecule complex to complete the loss of 89 u. Both types of pathway include the transfer/migration of H atoms from the alpha-carbon position of gammaAbu or A residues.     

Pharmaceutical determination in surface and wastewaters using high-performance liquid chromatography-(electrospray)-mass spectrometry

A method was developed to determine 11 pharmaceutical compounds in water samples. The method uses SPE and HPLC coupled to MS (LC/MS) using ESI in both positive and negative modes. Three different sorbents were compared for the extraction of analytes from river and sewage treatment plant (STP) waters and OASIS HLB provided the best results. For the solid-phase extraction of 500 mL of river water samples, the recoveries were between 41 and 101% with the exception of acetaminophen, salicylic acid and naproxen. The LODs were between 3 and 5 ng/L for all the compounds, except naproxen which had an LOD of 15 ng/L. Acetaminophen, caffeine, carbamazepine, bezafibrate and ibuprofen were found in three of the tested river samples at ng/L levels and among them, the highest values were for caffeine and bezafibrate with 305 and 363 ng/L, respectively. For the influent and effluent water samples of the STP, volumes of 100 and 250 mL were used, respectively, to obtain acceptable recoveries. All the compounds showed recoveries between 33 and 91% for effluent samples and 33-72% for influent samples, with the exception of acetaminophen, salicylic acid and bezafibrate, which had lower recoveries. The method developed enabled pharmaceuticals in the influent and effluent sewage waters to be determined in five campaigns carried out between February 2004 and June 2005. Several pharmaceuticals were found in the influent samples: for instance, maximum concentrations of ibuprofen and caffeine were 6 and 40 microg/L, respectively.     

Evaluation of proton conductivity of sulfonated polyimide/dihydroxy naphthalene charge‐transfer complex hybrid membranes

Sulfonated polyimide (SPI)/dihydroxynaphthalene (DHN) charge‐transfer (CT) complex hybrid films were investigated as possible alternative for polymer electrolyte membranes in polymer electrolyte fuel cells. SPI/DHN CT complex hybrid films include CT complexes, which might work as electronic conductors, and sulfonic acid units, which could work as proton conductors. Therefore, the origin of the conductivity of SPI/DHN complex hybrid films was evaluated by four‐probe impedance measurements in the through‐plane direction of the films. The obtained conductivity of the CT complex hybrid films increased with the increase of ion exchange capacity of the CT films and the decrease of CT complex concentration in the films. These results indicated that proton transfer dominantly occurred in the CT complex hybrid films. Proton conductivity of the CT complex hybrid films consisting of 2,6‐ or 1,5‐DHN showed the similar values, although the molecular geometries of the CT complex were different. The activation energy values for proton conductivity in the CT films were approximately the same as that of Nafion 212. Water uptake (WU) results were also conducted and suggest that CT complex formation could control the degree of WU of the films and prevent dissolution of SPI. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2991–2997     

Development of an immunosensor for the detection of Francisella tularensis antibodies

Tularemia, also known as rabbit fever, is a highly infectious zoonotic disease caused by a non-motile and non-spore-forming Gram-negative coccoid rod bacterium, Francisella tularensis. It occurs naturally in lagomorphs (rabbits and hares), but many animals have been reported to be susceptible. Transmission to humans is mostly caused by inhalation of aerosolised bacteria, handling of infected animals, arthropod stings, and ingestion of contaminated foods and water. At present, pathogenic isolation, molecular detection, and serology are the most commonly used methods to confirm the diagnosis of tularemia. In this work, an electrochemical immunosensor for the detection of anti-F. tularensis antibodies was developed, consisting of gold-based self-assembled monolayers of a carboxylic-group-terminated bipodal alkanethiol that is covalently linked to a lipopolysaccharide (LPS) that can be found in the outer membrane of the bacteria F. tularensis. The presence of anti-F. tularensis antibodies was measured using horseradish peroxidase-labelled protein A (HRP-protein A) from Staphylococcus aureus, and the developed immunosensor gave a stable quantitative response to different anti-F. tularensis FB11 antibody concentrations after 30 min with a limit of detection of 15 ng/mL, RSD of 9 %, n?=?3. The developed immunosensor was tested with serum from animals infected with tularemia and was compared to the results obtained using ELISA showing an excellent degree of correlation.     

Hybrid films of polyetherimide containing in situ grown Ag,Pd, and AgPd alloy nanoparticles: Synthesis route,morphology, and gas transport properties

In this study, bimetallic/polymer films are synthesized from polyetherimide (PEI), palladium acetate and silver nitrate for a wide range of total metal amount (from 0 to 30 wt %) and different Ag to Pd molar ratios. Hybrid precursor films are first prepared from polymer/metal complex solutions and the metal nanoparticles are then generated within the PEI matrix by annealing the precursor film under specific conditions. Reference neat PEI films and monometallic films are prepared in the same conditions. Interestingly, formation of AgPd alloys directly within the polymer films is for the first time obtained from a very simple and environmentally friendly route. Based on X‐ray diffraction and transmission electron microscopy analyses, a nanostructuration mechanism is proposed. The interactions of hydrogen towards the nanocomposites are investigated and discussed as a function of the nanoparticle composition. The impact of the nanostructuration is also studied on H₂, CO₂, and He permeation properties. Significant improvement of barrier properties is achieved. The pertinent parameters of the gas transport are identified and modelled for each gas/composite system. Finally, from both morphological and gas transport analyses, it is concluded that in situ generation AgPd alloys with Pd to Ag ratio above 1 leads to very interesting and promising materials. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1211–1220