1,3,4-Oxadiazole N-Mannich Bases: Synthesis,Antimicrobial, and Anti-Proliferative Activities

The reaction of 5-(3,4-dimethoxyphenyl)-1,3,4-oxadiazole-2(3H)-thione 3 with formaldehyde solution and primary aromatic amines or 1-substituted piperazines, in ethanol at room temperature yielded the corresponding N-Mannich bases 3-arylaminomethyl-5-(3,4-dimethoxyphenyl)-1,3,4-oxadiazole-2(3H)-thiones 4a–l or 3-[(4-substituted piperazin-1-yl)methyl]-5-(3,4-dimethoxyphenyl)-1,3,4-oxadiazole-2(3H)-thiones 5a–d, respectively. The in vitro inhibitory activity of compounds 4a–l and 5a–d was assessed against pathogenic Gram-positive, Gram-negative bacteria, and the yeast-like pathogenic fungus Candida albicans. The piperazinomethyl derivatives 5c and 5d displayed broad-spectrum antibacterial activities the minimal inhibitory concentration (MIC) 0.5–8 μg/mL) and compounds 4j, 4l, 5a, and 5b showed potent activity against the tested Gram-positive bacteria. In addition, the anti-proliferative activity of the compounds was evaluated against prostate cancer (PC3), human colorectal cancer (HCT-116), human hepatocellular carcinoma (HePG-2), human epithelioid carcinoma (HeLa), and human breast cancer (MCF7) cell lines. The optimum anti-proliferative activity was attained by compounds 4l, 5a, 5c, and 5d.     

Survey of Phenolic Acids,Flavonoids and In Vitro Antioxidant Potency Between Fig Peels and Pulps: Chemical and Chemometric Approach

In the present study, chromatic coordinates, phenolic acids, flavonoids and antioxidant capacity assessed by 1,1-diphenyl-2-picrylhydrazyl (DPPH), 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulfonate (ABTS) and lipid peroxidation inhibition capacity (LPIC) essays and their relative IC50 were investigated in 25 fig cultivars growing in Morocco. The aims of this study were to determine (i) the variation in these compounds among light and dark-colored cultivars, (ii) their partitioning between fruit peel and pulp and (iii) to display network connections among these variables. Twelve phenolic compounds (PCs) were isolated in peel extract versus eight in pulp samples. Anthocyanins, mainly cyanidin-3,5-diglucoside and cyanidin-3-O-rutinoside, were the predominant compounds in peels, where the mean concentrations were 75.90 ± 18.76 and 77.97 ± 18.95 µg/g dw, respectively. On the other hand, (−)-epicatechin and cyanidin-3-O-rutinoside were the major compounds in the pulp extracts, where the mean values were 5.23 ± 4.03 and 9.01 ± 5.67 µg/g dw, respectively. A two-dimensional hierarchically clustered heatmap was applied to the dataset to explore correlations in the dataset and similarities between cultivars, without dimensionality reduction. Results showed that anthocyanins, particularly pelargonidin-3-O-rutinoside, cyanidin-3,5-diglucoside and cyanidin-3-O-rutinoside, were the main contributors to the peels’ free radical scavenging capacity. This capacity was particularly higher in the peel of dark-colored figs compared to the fruit pulp. The local cultivar “INRA 1301” showed the most promising phenolic profile due to its very high levels of almost all detected PCs, especially (−)-epicatechin, quercetin-3-O-rutinoside, quercetin-3-O-glucoside, cyanidine-3,5-diglucoside, cyanidine-3-O-rutinoside and pelargonidin-3-O-rutinoside (54.66, 141.08, 35.48, 494.08, 478.66, 12.56 µg/g dw, respectively). Having the darkest figs in the collection (L* = 25.72, c* = 22.09 and h° = 20.99), this cultivar has also combined promising IC50 values, which were of 19.85, 40.58 and 124.78 µg/mL for DPPH, ABTS and LPIC essays, respectively.     

Kinetic,isotherm, and mechanism investigations of the removal of nitrate and nitrite from water by the synthesized hydrotalcite Mg–Al

Research on Chemical Intermediates - The objective of this work is to test the effectiveness of hydrotalcite as an adsorbent for the retention of nitrate and nitrite ions and to study the influence...     

A size-modified poisson–boltzmann ion channel model in a solvent of multiple ionic species: Application to voltage-dependent anion channel

We present a new size-modified Poisson–Boltzmann ion channel (SMPBIC) model and use it to calculate the electrostatic potential, ionic concentrations, and electrostatic solvation free energy for a voltage-dependent anion channel (VDAC) on a biological membrane in a solution mixture of multiple ionic species. In particular, the new SMPBIC model adopts a membrane surface charge density and a natural Neumann boundary condition to reflect the charge effect of the membrane on the electrostatics of VDAC. To avoid the singularity difficulties caused by the atomic charges of VDAC, the new SMPBIC model is split into three submodels such that the solution of one of the submodels is obtained analytically and contains all the singularity points of the SMPBIC model. The other two submodels are then solved numerically much more efficiently than the original SMPBIC model. As an application of this SMPBIC submodel partitioning scheme, we derive a new formula for computing the electrostatic solvation free energy. Numerical results for a human VDAC isoform 1 (hVDAC1) in three different salt solutions, each with up to five different ionic species, confirm the significant effects of membrane surface charges on both the electrostatics and ionic concentrations. The results also show that the new SMPBIC model can describe well the anion selectivity property of hVDAC1, and that the new electrostatic solvation free energy formula can significantly improve the accuracy of the currently used formula. © 2019 Wiley Periodicals, Inc.     

Polyacrylic acid/polyaniline composite as efficient adsorbent for uranium extraction from nuclear industrial effluent

Journal of Radioanalytical and Nuclear Chemistry - Polyacrylic acid/polyaniline composite (a three-dimensional cross-linked hydrophilic chelating polymeric sorbent) was improved for promoted...     

Green synthesis of bio-ethyl acetate over Egyptian natural red clay as a highly active,selective, and eco-friendly catalyst

The present work focused on the utilization of Egyptian red clay (ERC) without any treatment as a highly efficient, selective, and eco-friendly catalyst for synthesis of bio-ethyl acetate in the gas phase. The best conditions used in conventional fixed bed reactor were 130 cm³/min total flow rate of air with 1.6 and 2.1 vol% bio-ethanol and bio-acetic acid, respectively, 1 g clay catalyst calcined at 300 and 225°C reaction temperature. Under these conditions, the conversions to ester achieved were about 80 and 98% after 5 and 30 min, respectively, from the initial admission of the reactants into the reactor. The amount and type of surface acidity were identified by isopropanol reaction and chemisorption of basic probes. The results demonstrated that the majority of intermediate strength of BrØnsted acid sites are the key role for the dehydration reaction toward ester formation. The virgin and annealed clay solids were characterized using X-ray fluorescence (XRF), thermogravimetry (TG) and differential thermal analysis (DTA), Fourier transform infrared (FTIR), X-ray diffraction (XRD), and N₂ sorption.     

Deposition of Phosphate Nanoparticles onto Textile Fabrics via Sol-gel Method and Their Kinetics Desorption Studies

In this paper, phosphate nanoparticles were coated on cotton(CO) and polyester(PES) textile surfaces by sol-gel method using tetraethylorthosilicate(TEOS) and chloropropyltriethoxysilane(CPTS) as silica precursors. The deposited nanoparticles were observed with scanning electronic microscopy energy-dispersive X-ray spectroscopy (SEM-EDX). The release kinetics of phosphorus(P) from these textiles into the aqueous medium(Aq), acid(Ac), and basic(Ba) artificial sweats were then studied. The released amount of phosphorus was evaluated by the inductively coupled plasma(ICP) according to ISO NF EN 16711-2 procedure. The results revealed that the release of P into the aqueous medium is lower than in the artificial sweat. The kinetics data[the phosphorus desorption amount(mg/g) as a function of time] were modeled according to five models:the first order, the second order, the third order, simple Elovich and parabolic diffusion. The suitable model was chosen based on the coefficient of determination(R²) and the calculation of the sum of the absolute errors(EABS), which describes the error between the theoretical and experimental values. SEM observations were also carried out on the fabrics after desorption in order to show the impact of desorption on their morphology. Furthermore, the impact of P release on the tensile strength of CO and PES fabrics was investigated using a uniaxial tensile test. The thermal stability of all samples before and after desorption was assessed by thermogravimetric analysis(ATG).     

Entrapment of organic fluorophores in calcium phosphate nanoparticles with slow release

Two organic fluorophores, fluorescein (F) and rhodamine B (Rd), were entrapped in calcium phosphate nanoparticles. The as-obtained nanoparticles can be used for biological release applications. For this aim, calcium phosphate nanoparticles were synthesized using the precipitation method. Structural analysis of these nanoparticles was performed using XRD, FTIR, and Raman spectroscopy, confirming that the synthesized nanoparticles were hydroxyapatite. TEM and SEM analyses demonstrated that these nanoparticles had a size of 20 nm and a well-defined morphology. F and Rd (about 0.5 wt.%) were entrapped in these nanoparticles and their release, as a function of time, was studied via UV-Vis spectroscopy. The obtained results showed that the release of both fluorophores was progressive over time. The trapping efficiencies of the fluorophores were 67.15% and 90.76% for F and Rd, respectively.     

Beyond Perovskite Solar Cells: Tellurium Iodide as a Promising Light‐Absorbing Material for Solution‐Processed Photovoltaic Application

Searching new light‐absorbing materials to replace toxic lead halide in solar cells is very important and highly desirable. In this research, we firstly demonstrated that tellurium iodide (TeI₄) could be used as a light‐absorbing material in solar cells due to its suitable optical band gap and the active lone‐pair electron orbital in Te⁴⁺. The best power conversion efficiency (PCE=3.56%) was achieved with a concentration of 0.9 M TeI₄ in DMF:DMSO (4 : 1, v,v) without any heat treatment or antisolvent dripping. Our study indicates the promising potential of TeI₄ for photovoltaic and optoelectronic applications.