Effective elastic shear stiffness of a periodic fibrous composite with non-uniform imperfect contact between the matrix and the fibers

In this contribution, effective elastic moduli are obtained by means of the asymptotic homogenization method, for oblique two-phase fibrous periodic composites with non-uniform imperfect contact conditions at the interface. This work is an extension of previous reported results, where only the perfect contact for elastic or piezoelectric composites under imperfect spring model was considered. The constituents of the composites exhibit transversely isotropic properties. A doubly periodic parallelogram array of cylindrical inclusions under longitudinal shear is considered. The behavior of the shear elastic coefficient for different geometry arrays related to the angle of the cell is studied. As validation of the present method, some numerical examples and comparisons with theoretical results verified that the present model is efficient for the analysis of composites with presence of imperfect interface and parallelogram cell. The effect of the non uniform imperfection on the shear effective property is observed. The present method can provide benchmark results for other numerical and approximate methods.     

Two new luffarin derivatives from the Adriatic Sea sponge Fasciospongia cavernosa

Together with the known luffarin V and 6Z-luffarin V, two new sesterterpenes (1a and 2), related to luffarins have been isolated from the sponge Fasciospongia cavernosa, collected in the Northern Adriatic Sea. The structures of the new compounds were proposed on the basis of spectroscopic data. The absolute stereochemistry of compound 1a was determined by application of Mosher's method.     

Degenerate differential equations and modified Szász-Mirakjan operators

We consider the elliptic operator Lu(x):= xu″(x)+β(x)u′(x) + γ (x)u(x) with Wentzell-type boundary condition, in spaces of continuous function on [0,+∞[. We prove that such operators generate positive C ₀-semigroup which can be approximated by means of iterated of modified Szász-Mirakjan operators here introduced.     

5-Hydroxy-pyrrolone based building blocks as maleimide alternatives for protein bioconjugation and single-site multi-functionalization

Recent dramatic expansion in potential uses of protein conjugates has fueled the development of a wide range of protein modification methods; however, the desirable single-site multi-functionalization of proteins has remained a particularly intransigent challenge. Herein, we present the application of 5-hydroxy-1,5-dihydro-2H-pyrrol-2-ones (5HP2Os) as advantageous alternatives to widely used maleimides for the chemo- and site-selective labeling of cysteine residues within proteins. A variety of 5HP2O building blocks have been synthesized using a one-pot photooxidation reaction starting from simple and readily accessible furans and using visible light and oxygen. These novel reagents display excellent cysteine selectivity and also yield thiol conjugates with superior stability. 5HP2O building blocks offer a unique opportunity to introduce multiple new functionalities into a protein at a single site and in a single step, thus, significantly enhancing the resultant conjugate''s properties.

Recent expansion in potential uses of protein conjugates has fueled the development of a range of protein modification methods; however, the desirable single-site multi-functionalization of proteins has remained a particularly intransigent challenge.     

Amperometric determination of bonded glucose with an MnO(2) and glucose oxidase bulk-modified screen-printed electrode using flow-injection analysis

A screen-printed amperometric biosensor based on carbon ink double bulk-modified with MnO₂ as a mediator and glucose oxidase as a biocomponent was investigated for its ability to serve as a detector for bonded glucose in different compounds, such as cellobiose, saccharose, (-)-4-nitrophenyl-β-d-glucopyranoside, as well as in beer samples by flow-injection analysis (FIA). The biosensor could be operated under physiological conditions (0.1 M phosphate buffer, pH 7.5) and exhibited good reproducibility and stability. Bonded glucose was released with glucosidase in solution, and the free glucose was detected with the modified screen-printed electrode (SPE). The release of glucose by the aid of glucosidase from cellobiose, saccharose and (-)-4-nitrophenyl-β-d-glucopyranoside in solution showed that stoichiometric quantities of free glucose could be monitored in all three cases.The linear range of the amperometric response of the biosensor in the FIA-mode flow rate 0.2 mL min⁻¹, injection volume 0.25 mL, operation potential 0.48 V versus Ag/AgCl) extends from 11 to 13,900 μmol L⁻¹ glucose in free form. The limit of detection (3σ) is 1 μmol L⁻¹ glucose. A concentration of 100 μmol L⁻¹ yields a relative standard deviation of approximately 7% with five injections. These values correspond to the same concentrations of bonded glucose supposed that it is liberated quantitatively (incubation for 2 h with glucosidase).Bonded glucose could be determined in beer samples using the same assay. The results corresponded very well with the reference procedure.     

A new sono-electrochemical method for enhanced detoxification of hydrophilic chloroorganic pollutants in water

A new method for detoxification of hydrophilic chloroorganic pollutants in effluent water was developed, using a combination of ultrasound waves, electrochemistry and Fenton's reagent. The advantages of the method are exemplified using two target compounds: the common herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) and its derivative 2,4-dichlorophenol (2,4-DCP). The high degradation power of this process is due to the large production of oxidizing hydroxyl radicals and high mass transfer due to sonication. Application of this sono-electrochemical Fenton process (SEF) treatment (at 20 kHz) with quite a small current density, accomplished almost 50% oxidation of 2,4-D solution (300 ppm, 1.2 mM) in just 60 s. Similar treatments ran for 600 s resulted in practically full degradation of the herbicide; sizable oxidation of 2,4-DCP also occurs. The main intermediate compounds produced in the SEF process were identified. Their kinetic profile was measured and a chemical reaction scheme was suggested. The efficiency of the SEF process is tentatively much higher than the reference degradation methods and the time required for full degradation is considerably shorter. The SEF process maintains high performance up to concentrations which are higher than reference methods. The optimum concentration of Fe²⁺ ions required for this process was found to be of about 2 mM, which is lower than that in reference techniques. These findings indicate that SEF process may be an effective method for detoxification of environmental water.     

Antibacterial properties of ruthenium(II) benzamide complexes

Reactions of the new acyclic ligand DNBH with RuCl₃ · 3H₂O, followed by addition of a secondary ligand L (L = PPh₃, 1,10-phenanthroline, 2,2-bipyridine, pyridine and 2,4-diaminotoluene), yield six binuclear metal complexes, TR1–TR6. Two different methods were employed: template and a two-step synthesis, both yielding the same complexes. DNBH and its metal complexes were characterised by a combination of spectroscopic, elemental and magnetic susceptibility data. Coordination was found to be through the carbonyl oxygen of amide and phenolic oxygen in the octahedral environment of the metal. DNBH and some of the metal complexes display antibacterial properties.     

Indium doped zinc oxide nanopowders for transparent conducting coatings on glass substrates

Crystalline indium doped zinc oxide (IZO) nanopowders were synthesized using hydrothermal treatment processing. Increasing the doping ratio of indium in the zinc oxide significantly influences the phase structure and shape of the nanopowders resulting in nanorod to nanoparticulate morphologies. As the doping profile increases, the crystallite size decreases, the band gap energy blue shifts and the specific surface area increases (measured by BET method). Additionally Raman spectroscopy exhibited shifts of several peaks, as well as revealed new peaks, confirming the substitution of indium ions within the zinc oxide lattice sites. An IZO suspension made of IZO nanoparticles (In/Zn = 3 atm.%) with a zeta potential greater than 30 mV at pH = 6 was successfully spin-coated on glass substrates for to make transparent conductive coatings evincing sheet resistances as low as 35 kΩ_□ (ρ = 4.9 × 10^?3 Ω m,) with transmission in the visible range as high as 90 %.     

Functional magnetic resonance imaging: Comparison between activation maps and computation pipelines in a clinical context

In this study new evaluation strategies for comparing different Statistical Parametric Maps computed from fMRI time-series analysis software tools are proposed. The aim of our work is to assess and quantitatively evaluate the statistical agreement of activation maps. Some pre-processing steps are necessary to compare SPMs (Statistical Parametric Maps), including segmentation and co-registration. The study of the statistical agreement is carried out following two ways. The first way considers SPMs as the result of two classification processes and extracts confusion matrix and Cohen's kappa index to assess agreement. Some considerations will be made on the statistical dependence of classes and a new formulation of kappa index will be used for overcoming this problem. The second way considers SPMs as two 3D images, and computes the similarity of SPMs images with a fuzzy formulation of the Jaccard Index. Several experiments were conducted both to assess the performance of the proposed evaluation tools and to compare activation maps computation pipelines from two widely used software tools in a clinical context.