4,5-二苯基-2-(9-苯基-9H-3-咔唑基)-1H-咪唑的合成及其性能

以联苯甲酰、对溴苯甲醛和乙酸铵为原料，经缩合反应制得2-(4-溴苯基)-4,5-二苯基咪唑(1); 1与N-苯基-3-咔唑硼酸经Suzuki偶联反应合成了一种具有D-π-A结构的新型咪唑衍生物4,5-苯基-2-(9-苯基-9H-3-咔唑基)-1H-咪唑(2），其结构经¹H NMR, ¹³C NMR, IR和MS(EI)表征。采用FL, UV-Vis，循环伏安法（CV）和理论计算对2的光电性能进行了研究。结果表明：2的最大吸收波长为302 nm和326 nm，荧光发射波长为395 nm和412 nm, HOMO和LUMO轨道能级分别为5.35 eV和2.14 eV。     

Ion Product of Pure Water Characterized by Physics-Based Water Model

Pure water has been characterized for nearly a century, by its dissociation into hydronium (H₃O)¹⁺ and hydroxide (HO)^1- ions. As a chemical equilibrium reaction, the equilibrium constant, known as the ion product or the product of the equilibrium concentration of the two ion species, has been extensively measured by chemists over the liquid water temper-ature and pressure range. The experimental data have been nonlinear least-squares fitted to chemical thermodynamic-based equilibrium equations, which have been accepted as the industrial standard for 35 years. In this study, a new and statistical-physics-based water ion product equation is presented, in which, the ions are the positively charged protons and the negatively charged proton-holes or prohols. Nonlinear least squares fits of our equation to the experimental data in the 0-100 ℃ pure liquid water range, give a factor of two better precision than the 35-year industrial standard.     

Dual‐responsive supramolecular self‐assembly of inclusion complex of an azobenzene‐ended poly(ε‐caprolactone) with a water‐soluble pillar[6]arene and its application in controlled drug release

Dual photo‐ and pH‐responsive polymeric vesicles are constructed from a host–guest complex between a water‐soluble pillar[6]arene and an azobenzene ended functionalized poly(ε‐caprolactone). Reversible morphological transitions between vesicles and solid aggregates are achieved upon repeated UV stimulus and pH stimulus. Moreover, the polymeric vesicles present excellent cytocompatibility toward HepG2 cells and can be further applied for controlled release of a hydrophilic model drug, DOX?HCl. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2477–2482     

添加剂PVP和MTS对合成Beta分子筛结构与性能的影响

分别以铝酸钠和硅溶胶为铝源和硅源,四乙基氢氧化铵为模板剂,在水热条件下,考察了添加剂(聚乙烯吡咯烷酮(PVP)和甲基三乙氧基硅烷(MTS))对合成Beta分子筛结构与性能的影响,并通过XRD、TEM、BET、ICP、~(29)Si-NMR和NH_3-TPD等方法对合成样品进行了结构表征和作用机理讨论,同时以催化裂化异丙苯为模型反应评价其催化性能。结果表明,与传统Beta分子筛相比,加入PVP后所得样品具有更高结晶度和较高的硅铝物质的量比(25.68)以及较大的比表面积(772 m~2/g);而加入MTS后尽管具有较大比表面积(657 m~2/g)和较高硅铝物质的量比(25.76),但是结晶度却相对降低,且粒径减小(160-320 nm)。两种添加剂作用下所得样品均具有更多酸量,在催化裂化异丙苯的反应中表现出较高的催化活性。     

吸波材料与微波暗室问题的数学模型

为分析尖劈形材料的吸波性能,建立了半圆镜像模型将辐射波在尖劈空间的传播等效为射线对等分半圆的切割,确定了反射波线和吸波材料几何参数之间的解析关系.对于微波暗室问题,假设在余弦辐射体上随机选取一个方向的能量波束集中了其所有能量,分别建立了加权能量分布模型和Monte Carlo模型,仿真验证了两模型结论的一致性.     

Study on the Interaction between a Kind of Thieno[2,3-d] Pyrimidin-4(3H)-one and Bovine Serum Albumin by Fluorescence Spectrometric Method

用荧光光谱法研究了在生理条件下,3-对氯苯基-2-(4-叔丁基苯氧基)-3'-氧环己烷并噻吩并[2,3-d]嘧啶-4(3H)-酮(PTP)与牛血清白蛋白(BSA)的相互作用.实验表明,PTP主要以静态猝灭方式使BSA荧光强度显著降低.计算了不同温度下二者的结合常数和结合位点数,并根据热力学参数确定了PTP与BSA之间的作用力主要为氢键或范德华力.根据F(o)rster非辐射能量转移机理,测定了PTP与BSA相互结合时的作用距离,并用同步荧光技术讨论了其衍生物对BSA构象的影响.     

Phase-field modeling of void evolution and swelling in materials under irradiation

Void swelling is an important phenomenon observed in both nuclear fuels and cladding materials in operating nuclear reactors. In this work we develop a phase-field model to simulate void evolution and void volume change in irradiated materials. Important material processes, including the generation of defects such as vacancies and self-interstitials, their diffusion and annihilation, and void nucleation and evolution, have been taken into account in this model. The thermodynamic and kinetic properties, such...     

Synthesis of ethylene/vinyl ester copolymers with pendent linear branches via ring‐opening metathesis polymerization of fatty acid‐derived cyclooctenes

Fatty acid‐derived cyclooctenes, including n‐hexanoic acid ( M1 ), n‐octanoic acid ( M2 ), lauric acid ( M3 ), and palmitic acid ( M4 ), were prepared as monomers and polymerized by ring‐opening metathesis polymerization (ROMP) using Grubbs second‐generation catalyst ( G2 ). In all the cases, the regio‐irregular unsaturated polymers with pendent linear branches were obtained, which could be saturated by chemical hydrogenation with TSH/TPA in high conversion, yielding ethylene/vinyl ester copolymers with pendent linear branches on precisely every eighth backbone carbon. Both unsaturated and saturated polymers were amorphous, and their structures were characterized by FTIR, ¹H and ¹³C NMR spectra, and elemental analysis. Differential scanning calorimetry (DSC) and thermo‐gravimetric analysis (TGA) were used to study their thermal properties. The chain length of branches greatly affected the thermal properties of polymers. After hydrogenation, the thermal degradation stability of polymers was relatively improved. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2211–2220     

Kinetic and thermodynamic modeling of Portland cement hydration at low temperatures

Portland cement have to hydrate in cold climates in some particular conditions. Therefore, a better understanding of cement hydration under low temperatures would benefit the cement-based composites application. In this study, Portland cement was, therefore, kinetically and thermodynamically simulated based on a simple kinetics model and minimization of Gibbs free energy. The results of an evaluation indicate that Portland cement hydration impact factors include the water–cement ratio (w/c), temperature, and specific surface area, with the latter being an especially remarkable factor. Therefore, increasing the specific surface area to an appropriate level may be a solution to speed the delayed hydration due to low temperatures. Meanwhile, the w/c ratio is believed to be controlled under cold climates with consideration of durability. The thermodynamic calculation results suggest that low-temperature influences can be divided into three levels: irrevocable effects (<0 °C), recoverable effects (0–10 °C), and insignificant effects (10–20 °C). Portland cement was additionally measured via X-ray diffraction, thermal gravity analysis, and low-temperature nitrogen adsorption test in a laboratory and comparisons were drawn that validate the simulation result.