Lasing in the far IR spectral range under femtosecond optical excitation of the InAs semiconductor in a magnetic field

Generation of a coherent electromagnetic radiation in the far IR (THz) spectral range upon excitation of a semiconductor InAs crystal by 70-fs Ti: sapphire laser pulses is studied. The effect of a magnetic field of different orientation on generation in the submillimeter-wavelength range is analyzed. Placing the crystal into the magnetic field of an optimized permanent magnet with a strength of 5 kOe aligned along the surface of the semiconductor increased the power of generated radiation by a factor of six compared with that in the absence of the field. For the average pump-laser output power of 150 mW and repetition rate of 80 MHz, the average power of the THz radiation reached 100 nW. For detection of ultrashort pulses of the THz radiation, we used, for the first time, a highly sensitive uncooled optoacoustic detector, which detected signals with a power lower than 1 nW.     

Field Structure in the Cross Section of a Ferrite Inhomogeneous Anisotropic Insert of a Rectangular Waveguide

We develop a physico-mathematical model describing excitation and distribution of electromagnetic waves in an anisotropic waveguide or resonator in the three-dimensional case. We develop a theoretical approach for discretization of the Maxwell equations in an arbitrary medium in the presence of bounding walls of a waveguide or resonator. The resulting system of linear algebraic equations for the electric-field components in an inhomogeneous anisotropic medium is solved by the method of biconjugate gradient. The results of calculating the electric field lines in the cross section of an anisotropic insert of a rectangular waveguide are presented.     

Resonances in Three-Body Systems Studied by a Full Angular-Momentum, Smooth-Exterior Complex-Scaling Finite-Element Method

 The development of a tool for calculating resonances and bound states in three-body systems described by a single-potential energy surface is reported. The method has been applied to the antiprotonic helium, doubly excited states in helium, the ¹¹Li nuclear halo, the NeICl van der Waals molecule, and the recently found FHD reaction complex. Received November 26, 2001; accepted for publication November 28, 2001     

Computer simulation of selective absorption of radiation by the components of a light-scattering layer

A method of calculating the partial characteristics of radiation absorption by the components of light-scattering disperse layers is proposed. This method is based on statistical modeling (the Monte Carlo method). The absorptivities of photographic gelatin and silver bromide microcrystals and the corresponding distributions of the absorbed energy over the layer thickness are calculated using the example of an interaction between actinic radiation and silver halide photographic layers in the wavelength range λ=200–440 nm. The following structural parameters of the photographic layer are used in the calculation: the mean size of emulsion crystals d=0.5 μm; the polydispersity C _V =25%; the volume concentrations C _V =10, 20, and 30%; and the thickness of the emulsion layer H=10 μm.     

Mode theory of volume superimposed holograms: I. Hologram modes

The wave field arising at reconstruction of volume volume-superimposed holograms was studied taking into account the multiple wave diffraction at hologram gratings. The theory is based on the wave field concept in the form of a superposition of hologram modes. Superimposed hologram modes were found.     

A comprehensive study of the long pulse Nd:YAG laser drilling of multi-layer carbon fibre composites

The results of an extensive experimental study of the free running Nd:YAG laser drilling of a multi-layer carbon fibre composite, where adjacent layers have differently orientated fibres, are reported. For holes drilled with the laser operating in fixed-Q mode at 1064 nm, parallel sections of blind holes illustrating discontinuities in the hole size along a given section direction will be shown to occur at the interface between adjacent layers. An explanation for this effect is proposed. Detailed single pulse drilling characteristics will be presented illustrating the exit hole diameter as a function of pulse energy and material thickness. These characteristics illustrate a ‘stable' drilling regime in which the exit hole diameters are least sensitive to changes in pulse energy or material thickness and a less ‘stable' regime in which they are more strongly dependent on these parameters. Drilling characteristics will be given for two different beam qualities, illustrating the greater drilling depth and reduced hole size achievable with an improved beam quality. Finally holes drilled through a 2 mm thick sample of material with multiple pulses are considered. Size distribution curves for entrance and exit holes will be presented. The total energy required (number of pulses × pulse energy) to drill through 2 mm thick material will be reported as a function of pulse energy in stationary air and argon atmospheres and in a partial vacuum, illustrating a threshold energy which is dependent upon the drilling atmosphere. The threshold energies will be discussed with reference to plasma formation and the reactivity of the drilling atmosphere.     

Mass transport in metals under intensive impulse reactions

An unusually high mobility of atoms under intensive impulse reactions is explained by the behavior of point defects at the shock wave front. It is shown that either a shock wave front or moving dislocations can capture the interstitials, or they can be thermally activated in the direction of the shock wave propagation.     

Collisional excitation of Na-Rydberg atoms

The scattering of heavy ion with a multilevel Rydberg atom in the presence of an electromagnetic field is studied. The interaction of Rydberg atom and the e.m field is explored using non-perturbative quasi-energy technique. Although the results are presented for selected excitations but in actual calculations we have included many levels of the atom. The effect of various parameters are shown on collisional excitation process. As an illustration detailed calculations are performed for the inelastic proton-Na Rydberg atom collision accompanied by the transfer of photons and the effects of dressing due to the field are considered. The emphasis of the present work is on collision induced transitions especially the case that involves change of orbital as well as principal quantum number. Received 26 December 2001 / Received in final form 8 April 2002 Published online 19 July 2002     

Dynamic reflection holograms in CdF2 crystals with bistable centers

The diffraction efficiency and the recording and relaxation times of dynamic reflection holograms, recorded in CdF₂ crystals with bistable centers are studied experimentally in the temperature range 20–100°C. In the model experiments which measured the quality of the wave reflected from the hologram, the dynamic wavefront distortions are demonstrated to be efficiently compensated using a holographic corrector based on these crystals. CdF₂ crystals with bistable centers are likely to be useful in solving problems of correction of laser light wavefront and image correction in observation telescopes with nonideal primary mirrors.