Characterization of flower-inducing compound in Lemna paucicostata exposed to drought stress

A flower-inducing compound, LDS1, was isolated from a free-floating aquatic plant, Lemna paucicostata. The chemical structure and the absolute stereochemistry of LDS1 were determined as (9R,13R,11E,15Z)-9,13-dihydroxy-10-oxooctadeca-11,15-dienoic acid for its most abundant diastereomer. LDS1 was enzymatically produced when the plant was exposed to drought stress, and induced flowering at a concentration of 10 nM.     

Controlled Dynamic Helicity of a Folded Macrocycle Based on a Bisterephthalamide with a Twofold Z‐Shaped Structure

Dynamic helicity in a folded macrocycle and control of the helical preference are described. We designed macrocycle 1 with a dual mode of folding through the integration of two flexible units that are arranged twice to form a cyclic structure. As a folding unit, we used a terephthalamide skeleton and a Z‐shaped hydrocarbon: the former acted as a control unit to induce a preference of a particular sense of dynamic helicity and the latter was just a spacer. A terephthalamide unit provided a binding site for capturing a ditopic hydrogen‐bonding guest when it adopted helically folded syn forms (M/P). Thus, only the terephthalamide unit controlled the helical sense of dynamic helicity in a folded macrocycle through the supramolecular transmission of chirality upon complexation with a chiral ditopic guest. In addition, chirality on a host could also contribute to the control of the helical preference in a folded macrocycle, which led to exceptionally enhanced chiroptical signals.     

Preparation of Molecule‐Responsive Microsized Hydrogels via Photopolymerization for Smart Microchannel Microvalves

Microdevices designed for practical environmental pollution monitoring need to detect specific pollutants such as dioxins. Bisphenol A (BPA) has been widely used as a monomer for the synthesis of polycarbonate and epoxy resins. However, the recent discovery of its high potential ability to disrupt human endocrine systems has made the development of smart systems and microdevices for its detection and removal necessary. Molecule‐responsive microsized hydrogels with β‐cycrodextrin (β‐CD) as ligands are prepared by photopolymerization using a fluorescence microscope. The molecule‐responsive micro‐hydrogels show ultra‐quick shrinkage in response to target BPA. Furthermore, the flow rate of a microchannel is autonomously regulated by the molecule‐responsive shrinking of their hydrogels as smart microvalves.

     

Dispersion of Carbon Nanotubes with “Green” Detergents

Solubilization of carbon nanotubes (CNTs) is a fundamental technique for the use of CNTs and their conjugates as nanodevices and nanobiodevices. In this work, we demonstrate the preparation of CNT suspensions with “green” detergents made from coconuts and bamboo as fundamental research in CNT nanotechnology. Single-walled CNTs (SWNTs) with a few carboxylic acid groups (3–5%) and pristine multi-walled CNTs (MWNTs) were mixed in each detergent solution and sonicated with a bath-type sonicator. The prepared suspensions were characterized using absorbance spectroscopy, scanning electron microscopy, and Raman spectroscopy. Among the eight combinations of CNTs and detergents (two types of CNTs and four detergents, including sodium dodecyl sulfate (SDS) as the standard), SWNTs/MWNTs were well dispersed in all combinations except the combination of the MWNTs and the bamboo detergent. The stability of the suspensions prepared with coconut detergents was better than that prepared with SDS. Because the efficiency of the bamboo detergents against the MWNTs differed significantly from that against the SWNTs, the natural detergent might be useful for separating CNTs. Our results revealed that the use of the “green” detergents had the advantage of dispersing CNTs as well as SDS.     

Calix[4]arene-Based Triple-Stranded Metallohelicate in Water

The title complex is a triple-stranded metallohelicate organized by the self-assembly of 5,17-difunctionalized calix[4]arenes and metal cations with octahedral coordination geometry. Due to hydrophilic triethylene glycol chains on the lower rim of the calix[4]arene, the metallohelicate can encapsulate cationic guests in water. NMR and UV-vis titration experiments reveal that the metallohelicate captures a pyridinium guest with an alanine derivative to form a host-guest complex with a host-guest ratio of 1 : 1. CD spectroscopy confirms the bias of the P- and M-helical sense of the metallohelicate by the captured guest. The metallohelicate captures two molecules of dicationic N,N’-dimethyl-DABCO and monocationic N-methyl quinuclidine, exhibiting a positive allosteric effect. ¹H NMR titration experiments indicate that the bound guests are in close proximately to the aromatic rings of the ligands. Molecular mechanics calculations based on the UV-vis and NMR observations suggest that the first guest preorganizes the conformation of the metallohelicate to facilitate access of the second guest to the cavity.     

Hardness and slip systems of orthorhombic hen egg-white lysozyme crystals

Hardness and slip systems by an indentation method were investigated on different habit planes of orthorhombic hen egg-white lysozyme (O-HEWL) crystals containing water. A dependence of the hardness on the water-evaporation time exhibits three stages as incubation, transition and saturated ones, as tetragonal (T)-HEWL crystals reported previously. The hardness values of (1 1 0), (0 1 0) and (0 1 1) habit planes of O-HEWL in the incubation stage or wet condition exhibits 6, 8 and 10 MPa, respectively. The hardness depends on indented planes but it is independent of the air-humidity and crystal volumes. These values correspond to the intrinsic hardness for O-HEWL crystals containing water. In the incubation stage, the slip traces are clearly observed around the indentation mark and the corresponding six kinds of slip systems are identified to be {0 1 1}<1 0 0>, {1 1 0}<1 1 0>, {0 1 1}<0 1 1>, {1 1 0}<0 0 1>, {1 0 0}<0 0 1> and {0 1 0}<0 0 1>.     

Molecular Characterization of DNA Double Strand Breaks with Tip‐Enhanced Raman Scattering

DNA double strand breaks (DSBs) are deadly lesions that can lead to genetic defects and cell apoptosis. Techniques that directly detect DNA DSBs include scanning electron microscopy, atomic force microscopy (AFM), and fluorescence based approaches. While these techniques can be used to identify DSBs they provide no information on the molecular events occurring at the break. Tip‐enhanced Raman scattering (TERS) can provide molecular information from DNA at the nanoscale and in combination with AFM provides a new way to visualize and characterize the molecular structure of DSBs. DSBs result from cleavage at the 3’‐ and 5’‐bonds of deoxyribose upon exposure to UVC radiation based on the observation of P? O? H and methyl/methylene deformation modes enhanced in the TERS spectra. It is hypothesized that strand fragments are hydrogen‐terminated at the lesion, indicating the action of free radicals during photon exposure.     

Chemoselective Catalytic Conjugate Addition of Alcohols over Amines

A highly chemoselective conjugate addition of alcohols in the presence of amines is described. The cooperative nature of the catalyst enabled chemoselective activation of alcohols over amines, allowing the conjugate addition to soft Lewis basic α,β‐unsaturated nitriles. Divergent transformation of the nitrile functionality highlights the utility of the present catalysis.     

Total Synthesis of (±)‐Gephyrotoxin by Amide‐Selective Reductive Nucleophilic Addition

A chemoselective approach for the total synthesis of (±)‐gephyrotoxin has been developed. The key to success was the utilization of N‐methoxyamides, which enabled the direct coupling of the amide with an aldehyde and selective reductive nucleophilic addition to the amide in the presence of a variety of sensitive and electrophilic functional groups, such as a methyl ester. This chemoselective approach minimized the use of protecting‐group manipulations and redox reactions, which resulted in the most concise and efficient total synthesis of (±)‐gephyrotoxin described to date.     

Synthesis, π‐Face‐Selective Aggregation,and π‐Face Chiral Recognition of Configurationally Stable C3‐Symmetric Propeller‐Chiral Molecules with a π‐Core

The C₃‐symmetric propeller‐chiral compounds (P,P,P)‐ 1 and (M,M,M)‐ 1 with planar π‐cores perpendicular to the C₃‐axis were synthesized in optically pure states. (P,P,P)‐ 1 possesses two distinguishable propeller‐chiral π‐faces with rims of different heights named the (P/L)‐face and (P/H)‐face. Each face is configurationally stable because of the rigid structure of the helicenes contained in the π‐core. (P,P,P)‐ 1 formed dimeric aggregates in organic solutions as indicated by the results of ¹H NMR, CD, and UV/Vis spectroscopy and vapor pressure osmometry analyses. The (P/L)/(P/L) interactions were observed in the solid state by single‐crystal X‐ray analysis, and they were also predominant over the (P/H)/(P/H) and (P/L)/(P/H) interactions in solution, as indicated by the results of ¹H and 2D NMR spectroscopy analyses. The dimerization constant was obtained for a racemic mixture, which showed that the heterochiral (P,P,P)‐ 1 /(M,M,M)‐ 1 interactions were much weaker than the homochiral (P,P,P)‐ 1 /(P,P,P)‐ 1 interactions. The results indicated that the propeller‐chiral (P/L)‐face interacts with the (P/L)‐face more strongly than with the (P/H)‐face, (M/L)‐face, and (M/H)‐face. The study showed the π‐face‐selective aggregation and π‐face chiral recognition of the configurationally stable propeller‐chiral molecules.