A novel route to 2,4-dianilino-substituted pyrimidines

A method is described to couple sterically-hindered electron-poor anilines to the 4-position of the pyrimidine core using a pyrimidine-2,4-bis(trifluoromethanesulfonate).     

Optical Single-Sideband Modulators and Their Applications

We review our recent work in the implementation of optical single-sideband (OSSB) modulation and in the application of this modulation format to microwave photonics and optical testing systems. We have developed an enhanced OSSB modulator for wide-band operation, the so-called bidirectional OSSB modulator, and a simplification of this scheme for narrow-band applications. These OSSB modulators are based on the use of a standard single-electrode Mach-Zehnder electro-optic modulator (MZ-EOM) and passive fiber-optic components. In both designs, the OSSB operation is shown to be independent of the MZ-EOM bias. Therefore, the optical modulation depth at the output of the device can be enhanced using minimum transmission biasing to provide suppression of the optical carrier. Finally, we demonstrate the application of OSSB modulators to the improvement of microwave/millimeter-wave subcarrier multiplexing fiber-optic links and to narrow-band fiber radio systems. In addition, we analyzed the feasibility and the limitations of an optical vector network analysis technique based on OSSB modulation that can provide sub-picometer wavelength resolution.     

T(1) fast acquisition relaxation mapping (T(1)-FARM): optimized data acquisition

A theoretical procedure for estimating the precision of the T(1) Fast Acquisition Relaxation Mapping sequence as a function of a number of acquisition parameters has been validated by both simulations and experimental results. These results have clarified the selection of sequence parameters to give optimal accuracy and precision in the R(1)* measurements. There is excellent agreement between theory, simulation, and experiment except for flip angles greater than 9 degrees, at which point slice profile imperfections significantly degrade the precision of the technique. The experimental results indicate that over a range of T(1)s that would be seen in a bolus tracking experiment (25-1200 ms), T(1) Fast Acquisition Relaxation Mapping can be used to obtain 64 x 128 R(1)* maps at a rate of 1 map/s, with a precision of 10% or better.     

Polystyrene/decahydronaphthalene/propane phase equilibria and polymer conformation properties from intrinsic viscosities

The influence of dissolved propane (up to 31.2 wt %) on the phase equilibria of 5 wt % polystyrene (PS) dissolved in 66/34 wt % trans/cis‐decahydronaphthalene (DHN) was measured over the temperature range of 323–423 K. A suitable temperature, pressure, and propane composition operating space was defined to measure intrinsic viscosities of a single fluid phase. Intrinsic viscosities of PS in cosolvent mixtures of propane and trans/cis‐DHN were measured between 323 and 423 K and between 70 and 208 bar. The addition of propane to the isomeric mixture of DHN resulted in a decreased solvent quality for PS, causing a contraction of the PS coil. The most dramatic decrease in solvent quality with the addition of propane occurred at 323 K and 70 bar with approximately a 36% reduction in the viscometric radius with the addition of 45 mol % propane to DHN. At 423 K, the solvent quality was less sensitive to the addition of propane and only a 13% reduction in the viscometric radius was observed at 70 bar and 45 mol % propane in DHN. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Cyclization and Isomerization Reactionsin Silylhydrazine Chemistry

 This review describes the synthesis and isomerization reactions of cyclic silylhydrazines. Topics of discussion are the ring expansion of the three-membered Si(SiN₂) to the four-membered (SiN)₂ ring by lithiation of the (SiN₂) ring and by thermal silyl group insertion into the N*N bond, the ring expansion of a three-membered (SiN₂) to a five-membered (CSi₂N₂) ring by SiCH₂ insertion into the Si*N bond, the formation of isomeric four- and six-membered (SiN₂)₂ rings, the synthesis of five- and six-membered silylhydrazine rings, and the expansion of a five-membered (N₂Si₂N)N ring to the isomeric six-membered (SiNN)₂ ring. The mechanisms of the isomerizations are explained by quantum chemical calculations, and the results are verified by crystal structure determinations.     

Switchable Site-Selective Catalytic Carboxylation of Allylic Alcohols with CO2

A switchable site-selective catalytic carboxylation of allylic alcohols has been developed in which CO₂ is used with dual roles, both facilitating C−OH cleavage and as a C₁ source. This protocol is characterized by its mild reaction conditions, absence of stoichiometric amounts of organometallic reagents, broad scope, and exquisite regiodivergency which can be modulated by the type of ligand employed.     

A new controlled release system of chlorhexidine and chlorhexidine:βcd inclusion compounds based on porous silica

The purpose of this study was to prepare and characterize a controlled release system based on porous silica loaded with chlorhexidine (Cx) and its inclusion compounds in β-cyclodextrin (βcd), and to evaluate its antimicrobial activity. Acetate chlorhexidine (CxA), gluconate chlorhexidine (CxG), βcd:chlorhexidine acetate 2:1 (βcd:CxA) and βcd:chlorhexidine gluconate 2:1 (βcd:CxG) were incorporated into porous silica. Drug loading was characterized by FTIR, powder X-ray diffraction, thermal analysis and BET, and was shown to be in an amorphous state and porous matrix. The kinetics release parameter of the drug was established, which showed that the Cx systems release profile followed zero order release until 400 h and Higuchi model release until 750 h, after the burst effect at the first 8 h. Chlorhexidine therapeutic range was reached near first hour for all systems. The chlorhexidine porous silica system was biologically active against Enterococcus faecalis and Candida albicans in vitro. The systems showed an efficient Cx controlled release modulated by the presence of the β-cyclodextrin and by the porous silica matrices, providing effective antimicrobial activity.