On the isomerization of ent-kaurenic acid

Kaurenic acid (1a) is a tetracyclic diterpene that has an exocyclic double bond at delta16. Isokaurenic acid (2a) has an endocyclic delta15double bond. This compound has been isolated from Espeletia tenore (Espeletinae), a resinous plant from the Venezuelan Andes, but its occurrence is rare. In order to obtain a larger amount of 2a, the isomerization of la, which is easily obtained from other Espeletinae, was tried. Kaurenic acid methyl ester (1b) was treated with dil. HCl in CH3Cl/EtOH, after 6 h under reflux a yield of 41.5% isokaurenic acid methyl ester (2b) was obtained but 35.7% 16alpha-ethoxy-kauran-19-oic acid methyl ester (3b) had formed as a byproduct. Treating 1b with CF3COOH in refluxing CH2Cl2 permitted to obtain a yield of 66.6% of 2b in 4 h and only traces of 16alpha-hydroxy-kauran-19-oic acid methyl ester (3a) as a byproduct. Both isomers were separated on a silica gel column impregnated with 20% AgNO3. Treating 2b with KOH in refluxing DMSO yielded pure isokaurenic acid, no back isomerization was observed.     

Development of a stir bar sorptive extraction and thermal desorption-gas chromatography-mass spectrometry method for determining synthetic musks in water samples

This study presents the development of an analytical method for determining 9 synthetic musks in water matrices. The developed method is based on stir bar sorptive extraction (SBSE), coated with polydimethylsiloxane, and coupled with a thermal desorption–gas chromatography–mass spectrometry system (TD–GC–MS). SBSE can efficiently trap and desorb the analytes providing low limits of detection (between 0.02 ng L⁻¹ and 0.3 ng L⁻¹). Method validation showed good linearity, repeatability and reproducibility for all compounds. Furthermore, the limited manipulation of the sample required in this method implies a significant decrease of the risk of external contamination of the samples. The performance of the method in real samples was evaluated by analysing biological wastewater treatment plant (WWTP) influent and effluent samples, reverse osmosis treatment plant effluents and river waters. The most abundant musk was galaxolide with values up to 2069 ng L⁻¹ and 1432 ng L⁻¹ in the influent and effluent of urban WWTP samples, respectively. Cashmeran, Pantolide and Tonalide were also detected in all the matrices with values up to 94 ng L⁻¹, 26 ng L⁻¹ and 88 ng L⁻¹, respectively. Although in Europe the use of nitromusks in cosmetics is prohibited, musk xylene and musk ketone were detected both in the WWTP and in the river samples. As far as we know, this is the first time than a SBSE method coupled with TD is applied for the determination of synthetic musks in water samples.     

Determination of resveratrol and piceid in beer matrices by solid-phase extraction and liquid chromatography-tandem mass spectrometry

Beer is one of the most commonly consumed undistilled alcoholic beverages in many countries. In recent studies, the stilbenes resveratrol and piceid have been found in some hop varieties which are used in the production of beer. Therefore, they could be transferred to beer. The aim of the present work was to validate a method to study the potential content of trans- and cis-resveratrol and piceid in 110 commercial beers from around the world. The resveratrol and piceid contents of 110 beers were analyzed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) after a solid-phase extraction (SPE) using optimized and validated procedures for the beer matrix. The beer matrix effect was also studied. Stilbenes were found in quantifiable amounts in 92 beers, while concentrations below the limit of quantification (LOQ) were found in 18 beers. Resveratrol was found in the range of 1.34-77.0μg/L in 79% of the beers analyzed, and piceid was found in the range of 1.80-27.3μg/L in only 33% of them. The mean of total resveratrol in all the beers was 14.7±20.5μg/L. The content of resveratrol has been compared with other resveratrol containing foods. A serving of beer contains similar amounts of stilbenes as berries, less than chocolate and grape products but more than pistachios, peanuts or tomatoes. Overall, beer is one of the products with the lowest levels of total resveratrol (μg/L), and despite its high consumption it should not be considered as a representative source of resveratrol.     

New possibilities for the valorization of olive oil by-products

In this contribution, the capabilities of pressurized liquid extraction (PLE) using food-grade solvents, such as water and ethanol, to obtain antioxidant extracts rich on polyphenolic compounds from olive leaves are studied. Different extraction conditions were tested, and the PLE obtained extracts were characterized in vitro according to their antioxidant capacity (using the DPPH radical scavenging and the TEAC assays) and total phenols amounts. The most active extracts were obtained with hot pressurized water at 200 °C (EC(50) 18.6 μg/mL) and liquid ethanol at 150 °C (EC(50) 27.4 μg/mL), attaining at these conditions high extraction yields, around 40 and 30%, respectively. The particular phenolic composition of the obtained extracts was characterized by LC-ESI-MS. Using this method, 25 different phenolic compounds could be tentatively identified, including phenolic acids, secoiridoids, hydroxycinnamic acid derivatives, flavonols and flavones. Among them, hydroxytyrosol, oleuropein and luteolin-glucoside were the main phenolic antioxidants and were quantified on the extracts together with other minor constituents, by means of a UPLC-MS/MS method. Results showed that using water as extracting agent, the amount of phenolic compounds increased with the extraction temperature, being hydroxytyrosol the main phenolic component on the water PLE olive leaves extracts, reaching up to 8.542 mg/g dried extract. On the other hand, oleuropein was the main component on the extracts obtained with ethanol (6.156-2.819 mg/g extract). Results described in this work demonstrate the good possibilities of using PLE as a useful technique for the valorization of by-products from the olive oil industry, such as olive leaves.     

Analysis of wax esters in edible oils by automated on-line coupling liquid chromatography-gas chromatography using the through oven transfer adsorption desorption (TOTAD) interface

An automated method for the direct analysis of wax esters in edible oils is presented. The proposed method uses the TOTAD (through oven transfer adsorption desorption) interface for the on-line coupling of normal phase liquid chromatography and gas chromatography. In this fully automated system, the oil with C32 wax ester as internal standard and diluted with heptane is injected directly with no sample pre-treatment step other than filtration. The proposed method allows analysis of different wax esters, and is simpler and faster than the European Union Official Method, which is tedious and time-consuming. The obtained results closely match the certified values obtained from the median of the analytical results of the inter-labs certification study. Relative standard deviations of the concentrations are less than 5%. The method is appropriate for routine analysis as it is totally automated.     

Fluorescence detection by intensity changes for high-performance thin-layer chromatography separation of lipids using automated multiple development

Changes in emission of berberine cation, induced by non-covalent interactions with lipids on silica gel plates, can be used for detecting and quantifying lipids using fluorescence scanning densitometry in HPTLC analysis. This procedure, referred to as fluorescence detection by intensity changes (FDIC) has been used here in combination with automated multiple development (HPTLC/AMD), a gradient-based separation HPTLC technique, for separating, detecting and quantifying lipids from different families. Three different HPTLC/AMD gradient schemes have been developed for separating: neutral lipid families and steryl glycosides; different sphingolipids; and sphingosine-sphinganine mixtures. Fluorescent molar responses of studied lipids, and differences in response among different lipid families have been rationalized in the light of a previously proposed model of FDIC response, which is based on ion-induced dipole interactions between the fluorophore and the analyte. Likewise, computational calculations using molecular mechanics have also been a complementary useful tool to explain high FDIC responses of cholesteryl and steryl-derivatives, and moderate responses of sphingolipids. An explanation for the high FDIC response of cholesterol, whose limit of detection (LOD) is 5 ng, has been proposed. Advantages and limitations of FDIC application have also been discussed.     

Structure and surface coverage of water-based stearate coatings on calcium carbonate nanoparticles

In a preceding paper it was found that, during coating with solutions of a stearin salt in water, whatever the concentration used, a considerable part of the PCC surface remains free, indicating the development of an incomplete monolayer. This was explained by assuming a micelle adsorption mechanism as the dominating process in water, resulting in the formation of a multilayer structure composed of an inner incomplete chemisorbed monolayer and one or more physically adsorbed layers. This model predicted a physisorbed layer in which polar groups are oriented outwards of the particles, resulting in a hydrophilic surface, and contrary to experimental evidence. In this paper we propose that during the drying stage the physisorbed calcium stearate layers undergo a complex rearrangement leading to a hydrophobic coating with the aliphatic tails oriented outwards of the particles. The results of XRD measurements proved that the physisorbed stearate layer is crystalline, while DSC model experiments indicated that the layer goes through phase transitions during heat treatment. The proposed model matched with IGC measurements, showing a clear dependence of the specific component of surface energy on the amount of absorbed stearin. The agreement with values obtained for solvent and dry-coated particles support the proposed rearrangement of alkanoate molecules in the coating.     

Synthesis,characterization and X-ray studies of new chiral five-six-membered ring, [4.3.0] heterobicyclic system of monomeric boronates

Nine new boronates, six of them chiral, with five-six-membered ring heterobicycles were prepared by reaction of the Schiff bases and phenyl boronic acid. The boronates were fully characterized by spectroscopic techniques, NMR ¹H, ¹³C, ¹¹B, Infrared spectroscopy, mass spectrometry and elemental analysis. The reaction showed high diasteroselectivity, only in the case of compound 4c, containing a methyl substituent in the aliphatic moiety, the induction is low giving a 2:1 mixture of two diatereoisomers. The results showed that the preferred stereochemistry in the heterocycles is that where all substituents in the five membered ring and the phenyl group attached to boron atom are on the same side.     

A new flow injection preconcentration method based on multiwalled carbon nanotubes for the ETA-AAS determination of Cd in urine

A new flow injection (FIA) procedure for the preconcentration of cadmium in urine using multiwalled carbon nanotubes (MWCNT) as sorbent and posterior electrothermal atomization atomic absorption spectrometry (ETA-AAS) Cd determination has been developed. Cadmium was retained in a column filled with previously oxidized MWCNTs and it was quantitatively eluted with a nitric acid solution. The parameters influencing the adsorption-elution process such as pH of the sample solution, amount of sorbent and flow rates of sample as well as eluent solutions have been studied. Cd concentration in the eluent was measured by ETA-AAS under the optimized conditions obtained. The results indicated the elimination of urine matrix effect as a consequence of the preconcentration process performed. Total recovery of cadmium from urine at pH 7.2 using a column with 45 mg of MWCNTs as sorbent and employing a HNO₃ 0.5 mol L⁻¹ solution for elution was attained. The detection limit obtained was 0.010 μg L⁻¹ and the preconcentration factor achieved was 3.4. The method showed adequate precision (RSD: 3.4-9.8%) and accuracy (mean recovery: 97.4-100%). The developed method was applied for the determination of cadmium in real urine samples from healthy people (in the range of 0.14-2.94 μg L⁻¹) with satisfactory results.     

(Oligo)thienyl-imidazo-benzocrown ether derivatives: synthesis, photophysical studies and evaluation of their chemosensory properties

A series of novel (oligo)thienyl-imidazo-benzocrown ethers were synthesised through a simple method and evaluated as fluorimetric chemosensors for transition metal cations. Interaction with Ni²⁺, Pd²⁺, and Hg²⁺ in ACN/DMSO solution (99:1) was studied by absorption and emission spectroscopy. Chemoselectivity studies in the presence of Na⁺ were also carried out and a fluorescence enhancement upon chelation (CHEF) effect was observed following Hg²⁺ complexation. Considering that most systems using fluorescence spectroscopy for detecting Hg²⁺ are based on the complexation enhancement of the fluorescence quenching (CHEQ) effect, the present work represents one of the few examples for sensing of Hg²⁺ based on a CHEF effect.