Electrochemical Synthesis of MII Complexes with a Schiff Base containing an Amido Group. Crystal Structure of a Cobalt(II) Complex with a Reorganised Ligand

M(HL)(H₂O)_n complexes have been obtained by the electrochemical reaction of Fe, Co, Ni, Cu, Zn and Cd anodes with the potentially pentadentate and trianionic asymmetrical Schiff base 3‐aza‐N‐{2‐[1‐aza‐2‐(5‐nitro‐2‐hydroxylphenyl)‐vinyl]phenyl}‐4‐(5‐nitro‐2‐hydroxyphenyl)but‐3‐enamide (H₃L), containing a hard amido donor atom. The complexes have been characterized by elemental analysis, mass spectrometry, IR and ¹H NMR spectroscopies, magnetic measurements and molar conductivities. Co(HL)(H₂O) ( 2 ) has been found to rearrange in DMF solution into a crystallographically solved octahedral complex, CoL¹(H₂O)₂ ( 7 ) [where H₂L¹ is the symmetrical Schiff base ligand N,N′‐(1,2‐phenylene)‐bis(5‐nitro‐3‐hydroxysalicylidenimine)]. A hydrolysis mechanism is discussed to explain this rearrangement.     

Tautomeric conjugate acids of 2-aminopyrroles: effect of substituents, solvation and cosolute

The tautomeric preferences of the conjugated acids of 2-aminopyrrole derivatives have been examined both in the gas phase and in aqueous solution by using a combination of quantum mechanical, self-consistent reaction field and Monte Carlo–free-energy perturbation methods. The results show that the nature of substituents, the solvent and the presence of cosolute are relevant factors in modulating the relative stability between the tautomeric conjugate acids protonated at the heterocyclic ring and at the exocyclic amino nitrogen. Thus, attachment of electron-withdrawing groups to the ring, solvation in polar solvents, and the presence of negatively charged cosolutes tend to favor protonation at the exocyclic amino nitrogen. Nevertheless, none of these factors alone suffice to change the tautomeric preference for the ring-protonated forms. The results point out that the concerted occurrence of the three factors is necessary to shift the tautomeric preference towards the conjugated species protonated at the exocyclic nitrogen.Contribution to the Jacopo Tomasi Honorary Issue     

533—Structure and transport properties of artificial bipolar lipid membranes

The membranes of thermophilic archaebacteria are characterized by the presence of unusual bipolar saturated isoprenoid lipids. In order to investigate their molecular arrangement in the membrane and a possible influence on transport properties, we studied black films made from lipids of Caldariella acidophila, one of the most thermophilic archaebacteria. Details on the kinetics of formation at various temperatures are presented.Capacitance, compressibility and valinomycin-induced conductance values are compared with the corresponding data for a glycerol-monooleate (GMO) bilayer. A very peculiar behavior is presented by the bipolar lipid films studied. In fact, the values of conductance are more than two orders of magnitude lower than those of a GMO bilayer, while the values of capacitance and compressibility do not depend appreciably on the solvent in which the lipid is dispersed (in contrast with a GMO bilayer, where there is a 100% change).The results are discussed in terms of a proposed model of a monolayer organization of bipolar lipids and of the unusual composition of the hydrophobic core of the membrane.     

Mechanical,thermal and morphological properties of poly(ε‐caprolactone)/zein blends

Blends of poly(ε‐caprolactone) (PCL) with zein (PCL/zein) in different proportions (100/0, 75/25, 50/50, 25/75 and 0/100 wt% containing 5 wt% glycerol) were compared based on their mechanical properties (tensile strength, elongation at break, and Young's modulus), and on their thermal properties, the latter determined by thermogravimetric analysis (TGA) and dynamic mechanical thermal analysis (DMTA). The morphology of the materials was studied by scanning electron microscopy (SEM). Blends of PCL/zein showed reduced tensile strength and elongation at break, but increased Young's modulus compared to the pure polymers, in agreement with the DMTA and SEM results. These findings indicated that PCL and zein were incompatible. TGA showed that the thermal stability was enhanced by the addition of zein to PCL, whereas SEM showed a poor interfacial interaction between the polymers. Copyright © 2004 John Wiley & Sons, Ltd.     

Immunochromatographic flow-injection method for detection of human serum immunoglobulin G antibodies to Helicobacter pylori

This study reports on the development of an immunochromatographic flow-injection (FI) method for the quantitation of human serum IgG antibodies to Helicobacter pylori. Patients’ sera were injected into the carrier stream of a FI manifold incorporating an H. pylori immuno-adsorbent reactor. The immuno-adsorbent was prepared by covalently linking H. pylori antigens to periodate oxidized Sepharose CL-4B. Any H. pylori antibody present in the serum is bound to the immuno-sorbent. The bound antibody was quantified by injecting into the carrier stream anti-human IgG peroxidase conjugate followed by TMB/H₂O₂ as the enzyme substrate. The FI system was optimized with respect to antigen loading (1.0 mg/ml gel), bioreactor length (3.0 cm), enzyme conjugate (0.2 mg/ml) and sample loop size (250 μl). One hundred clinical samples were analyzed for their H. pylori antibody concentrations and the results evaluated with respect to their receiver-operator characteristics (ROC). When a cut-off absorbance of between 0.7 and 0.75 was used for positive and negative samples a specificity (>95%), a sensitivity (>90%)and an overall accuracy (>94%) were obtained.     

A Screening Method for Polycyclic Aromatic Hydrocarbons Determination in Water by Headspace SPME with GC-FID

A simple method for determination of polycyclic aromatic hydrocarbons (PAHs) in water using headspace solid-phase microextraction (HS-SPME) with gas chromatography-flame ionisation detector (GC-FID) was developed. In order to obtain the convenient experimental conditions for HS-SPME extraction an experimental design with two steps was accomplished. A 2^6-2 fractional factorial design and central composite design (CCD) considering three significant factors were used. Naphthalene, anthracene and fluoranthene were chosen as representatives of two, three and four aromatic rings, and the global response of three PAHs was used for the results, evaluation. The chosen extraction conditions were: 85 μm polyacrylate fibre; 50 °C temperature; 60 min time; 20 mL-dissolution volume (in 40 mL glass vial); without salt addition; and 2 min desorption time. The procedure was extended to other seven PAHs (acenaphthylene, acenaphthene, fluorene, phenanthrene, pyrene, chrysene and benzo(a)anthracene) and the analytical characteristics were checked. The limit of detection (LOD) was from 0.08 (anthracene) to 0.20 μg L^?1 (naphthalene). The precision expressed as relative standard deviation (RSD in %) using 50 μg L^?1 of each analyte ranged from 6.8 to 17 %. The method was applied to the analysis of the surface waters and leaching waters of contaminated soils from Gipuzkoa (North Spain). The PAHs were not detected in surface water samples. Most of the PAHs were found in the leachates from contaminated soils showing a maximum global value of 75.5 μg L^?1.     

A traceless solid-phase synthesis of pteridines

The linking of pyrimidines to polystyrene supports via either a 2- or 4-thioether provides access to pteridines through solid-phase synthesis. Oxidative cleavage (dimethyldioxirane) followed by nucleophilic substitution by amines, azide, or water completes a traceless synthesis of pteridines.     

Carrier-mediated transport of yttrium(III) through a supported liquid membrane containing TOPO in n-dodecane

Transport of yttrium(III) from nitrate medium through liquid membrane containing tri-n-octyl-phosphine oxide (TOPO) in n-dodecane, supported on a nucleoporous filter, into a strip solution with ethylenediaminetetraacetic acid (EDTA) has been studied. The kinetic dependences of transport were obtained and compared with a model, resulting in calculation of permeability coeffients and initial fluxes of yttrium. The influence of salting-out agent, initial metal and nitric acid concentrations in the feed, and of concentration of carrier in membrane are discussed.     

Synthetic studies on neomarinone: practical and efficient stereoselective synthesis of the side chain

A practical and efficient stereoselective synthesis of the side chain of neomarinone is reported. The synthesis was achieved in six steps (41% overall yield) from 2-methyl-2-cyclohexenone. The key step is a novel stereoselective 1,4-conjugate addition/enolate alkylation by an epoxide-opening reaction.     

Order from Chaos: Self‐Assembly of Nanoprism from a Mixture of Tetratopic Terpyridine‐Porphyrin Conformers

Porphyrins have been widely used in the self‐assembly of metallo‐supramolecules. In this study, we introduced 2,2':6,2"‐terpyridine (tpy) into a porphyrin core to synthesize a tetratopic building block with multiple conformers. During the self‐assembly with Zn(II), such a mixture of conformers was able to form a discrete nanoprism with all building blocks in one conformation. Detailed characterizations, including NMR, ESI‐MS and traveling‐wave ion mobility‐mass spectrometry (TWIM‐MS), all supported the formation of the desired assemblies. AFM and TEM further confirmed the dimensions of assembled nanoprisms. Moreover, the photophysical properties of the ligands and complexes were noticeably different depending upon size and metal ion center.