IsoméRisation avant la perte d'eau des ions aldéhydes et cétones protonés en spectrométrie de masse

Isomerization of Protonated Aldehyde and Ketone Ions in the Mass-Spectrography Before the Loss of Water In mass spectrometry, protonated aldehyde and ketone ions isomerize before the loss of a molecule of water. In order to specify this process, the spectra of deuterium labelled protonated aldehydes and ketones have been compared to the spectra of the corresponding isomer ions.     

Chronocoulometric study of the electrochemistry of Prussian blue

During the electrochemical oxidation of Prussian blue (PB) to Prussian yellow (PY), an electrocatalytic oxygen production proceeds at the electrode when aqueous electrolyte solutions are used. The formed oxygen is scavenged by the PY, probably by absorption, and it is consumed during the electrochemical reduction of PY to PB by a heterogeneous chemical reaction of PB with oxygen to PY and hydrogen peroxide. Because of this catalytic regeneration of PY, it is impossible to determine the amount of low-spin iron by chronocoulometry using a potential program in which PB is first oxidized to PY and then the charge is measured to reduce PY to PB. The latter charge is biased by the electrocatalytic PY regeneration.     

New aspects of the electroadsorption of ethyl xanthate on copper electrodes

The interaction of the ethyl xanthate (EX) anion with a copper electrode in a borate buffer solution, pH 9.2, has been investigated by cyclic voltammetry (CV), electrochemical quartz crystal microbalance (EQCM), electrochemical impedance spectroscopy (EIS), and measurements of contact angle (CA) under controlled potential. The results obtained allow establishing that, in the potential range from -0.80 and -0.60 V, two parallel reactions were characterized. These reactions were the ethyl xanthate electroadsorption and the hydrogen evolution reaction (HER). This last reaction has not been described by previous authors. Besides, the EIS measurements show that the mechanism of the HER on copper electrodes is not affected by the presence of a ethyl xanthate species. The EQCM study shows that in the electrodesorption process the departure of each ethyl xanthate species from the copper electrode is accompanied with the simultaneous entry of four to five water molecules. This fact is in accordance with the number of copper atoms involved in the adsorption of one ethyl xanthate species.     

Electroreduction of Aryldiazonium Ion at the Polar and Non-Polar Faces of ZnO: Characterisation of the Grafted Films and Their Influence on Near-Surface Band Bending

ZnO is a strong candidate for transparent electronic devices due to its wide band gap and earth-abundance, yet its practical use is limited by its surface metallicity arising from a surface electron accumulation layer (SEAL). The SEAL forms by hydroxylation of the surface under normal atmospheric conditions, and is present at all crystal faces of ZnO, although with differing hydroxyl structures. Multilayer aryl films grafted from aryldiazonium salts have previously been shown to decrease the downward bending at O-polar ZnO thin films, with Zn−O−C bonds anchoring the aryl films to the substrate. Herein we show that the Zn-polar (0001), O-polar (000 ), and non-polar m-plane (10 0) faces of ZnO single crystals, can also be successfully electrografted with nitrophenyl (NP) films. In all cases, X-ray photoelectron spectroscopy (XPS) measurements reveal that the downward surface band bending decreases after modification. XPS provides strong evidence for Zn−O−C bonding at each face. Electrochemical reduction of NP films on O-polar ZnO single crystals converts the film to a mainly aminophenyl layer, although with negligible further change in band bending. This contrasts with the large upward shifts in band bending caused by X-ray induced reduction.     

A two-step conversion of alpha,beta-unsaturated ketones to their alpha-carbalkoxy or alpha-carbamoyl derivatives

Several enones are converted into their alpha-iodo derivatives in excellent yields and carbonylated with palladium catalysis in the presence of alcohol or amines to the alpha-carbonyl enones in satisfactory yields.     

Development and validation of a glass-silicon microdroplet-based system to measure sulfite concentrations in beverages

Sulfite is often added to beverages as an antioxidant and antimicrobial agent. In fermented beverages, sulfite is also naturally produced by yeast cells. However, sulfite causes adverse health effects in asthmatic patients and accurate measurement of the sulfite concentration is therefore very important. Current sulfite analysis methods are time- and reagent-consuming and often require costly equipment. Here, we present a system allowing sensitive, ultralow-volume sulfite measurements based on a reusable glass-silicon microdroplet platform on which microdroplet generation, addition of enzymes through chemical-induced emulsion destabilization and pillar-induced droplet merging, emulsion restabilization, droplet incubation, and fluorescence measurements are integrated. In a first step, we developed and verified a fluorescence-based enzymatic assay for sulfite by measuring its analytical performance (LOD, LOQ, the dynamic working range, and the influence of salts, colorant, and sugars) and comparing fluorescent microplate readouts of fermentation samples with standard colorimetric measurements using the 5,5′-dithiobis-(2-nitrobenzoic acid) assay of the standard Gallery Plus Beermaster analysis platform. Next, samples were analyzed on the microdroplet platform, which also showed good correlation with the standard colorimetric analysis. Although the presented platform does not allow stable reinjection of droplets due to the presence of a tight array of micropillars at the fluidics entrances to prevent channel clogging by dust, removing the pillars, and integrating miniaturized pumps and optics in a future design would allow to use this platform for high-throughput, automated, and portable screening of microbes, plant, or mammalian cells.

ᅟ

     

Interrelations between the parasitophorous vacuole of Toxoplasma gondii and host cell organelles.

Toxoplasma gondii, the causative agent of toxoplasmosis, is capable of actively penetrating and multiplying in any nucleated cell of warm-blooded animals. Its survival strategies include escape from fusion of the parasitophorous vacuole with host cell lysosomes and rearrangement of host cell organelles in relation to the parasitophorous vacuole. In this article we report the rearrangement of host cell organelles and elements of the cytoskeleton of LLCMK2 cells, a lineage derived from green monkey kidney epithelial cells, in response to infection by T. gondii tachyzoites. Transmission electron microscopy made on flat embedded monolayers cut horizontally to the apical side of the cells or field emission scanning electron microscopy of monolayers scraped with scotch tape before sputtering showed that association of mitochondria to the vacuole is much less frequent than previously described. On the other hand, all parasitophorous vacuoles were surrounded by elements of the endoplasmic reticulum. These data were complemented by observations by laser scanning microscopy using fluorescent probes from mitochondria and endoplasmic reticulum and reinforced by three-dimensional reconstruction from serial sections observed by transmission electron microscopy and labeling of mitochondria and endoplasmic reticulum by fluorescent probes.     

Palladium-catalyzed Heck reactions of styrene derivatives and 2-iodo-p-carborane

p-Carborane has been vinylated on the 2-B-atom in high yields using the Heck reaction. Thus, the reaction between 2-iodo-p-carborane and various styrenes [4-H-, 4-C(6)H(4)-, 4-Cl-, 4-Br-, 4-NO(2)-, 4-CH(3)O-, and 4-CH(3)-] resulted in the production of the corresponding trans-beta-(2-B-p-carboranyl)styrene in DMF solution when reacted in the presence of silver phosphate and the palladacycle Herrmann's catalyst.     

Etude dilatométrique de la cristallisation et de la transformation polymorphe du polybutène — 1 isotactique

Résumé On étudie par dilatométrie la cinétique de cristallisation et de la transformation III de trois échantillons de polybutène-1 isotactique. On montre que la cristallisation de l'échantillon fondu est initiée par des germes hétérogènes, dont le nombre varie d'un échantillon à l'autre. La vitesse de cristallisation varie linéairement avec l'inverse du degré de surfusion (T ^–1), sa variation thermique étant indépendante de l'échantillon. On met en évidence l'importance de la cristallisation secondaire, qui suit le processus autocatalytique. D'autre part, la transformation III, après refroidissement, est initiée par des germes apparaissant sporadiquement dans les fibrilles lamellaires de la texture sphérulitique, et elle se propage le long de celles-ci. D'une manière générale la vitesse de transformation isotherme dépend de l'histoire thermique: on examine ici l'influence de la température de cristallisation primitive et celle d'une trempe préalable aux basses températures. Cette dernière engendre un grand nombre de germes, dont la fraction qui résiste à une élévation de température, accélère la transformation. On discute, enfin, les trois volumes de référence déterminant la cristallinité des échantillons dans les deux formes. On propose une nouvelle échelle de cristallinité, dont la cohérence est confirmée par l'invariance des valuers des coefficients de dilatation des deux formes de cristaux, déduites de la dilatation des échantillons obtenus après trempe ou cristallisation isotherme à haute température.

---

Summary Kinetics of crystallization and transformation III are investigated dilatometrically with three isotactic Polybutene-1 samples. Primary autocatalytic crystallization from the supercooled melt is initiated by a heterogeneous nucleation process, the number of nucle being determined by the previous temperature of the melt. The rate of crystallization depends linearly on the reciprocal of the degree of supercooling (T ^–1) and its thermal variation is identical for the three samples investigated. The importance of the secondary cristallization, which follows the primary process, is emphasized. On the other hand, the transformation III, which occurs after cooling the semicristalline sample in the room temperature range, is initiated by nuclei appearing sporadically in the lamellar ribbons of the spherulitic texture and they grow linearly along these ribbons. In general the isothermal rate of transformation depends on the previous thermal history of the sample: the influence of the cristallization temperature and that of quenching to low temperatures are systematically investigated. Such a quenching prior to transformation generates a great number of nuclei, a fraction of which persiste even at higher temperatures and increases the rate of transformation. Reference volumes, which determine the cristallinity of PB-1 in its two forms, are discussed. A new cristallinity scale is proposed, the coherence of which is confirmed by the constant values of the expansion coefficients of the two cristalline forms, calculated from the actuel thermal expansion of the semicristalline material, the cristallinity of which varied in a large range.

---

Zusammenfassung Es wird an drei isotaktischen Polybuten-1-Proben die Kinetik der Kristallisation und der Transformation von II nach I untersucht. Eine primäre autokatalytische Kristallisation aus der unterkühlten Schmelze wird durch einen heterogenen Keimbildungs-Prozeß initiiert. Die Zahl der Keime ist durch die vorausgehende Temperatur der Schmelze bedingt. Die Geschwindigkeit der Kristallisation hängt linear vom reziproken Wert der Unterkühlung ab (T ^–1) und die thermische Variation ist identisch für alle drei untersuchten Proben. Die Wichtigkeit der Sekundär-Kristallisation, die dem primären Prozeß folgt, wird betont. Andererseits wird die Transformation von II nach I, die nach Abkühlen der halb-kristallinen Probe auf Raumtemperatur eintritt, durch Keime initiiert, die verstreut in den laminaren Rippen der sphärulithischen Textur erscheinen. Sie wachsen linear längs der Rippen. Im allgemeinen hängt die isotherme Geschwindigkeit der Transformation von der thermischen Vorgeschichte der Probe ab. Der Einfluß der Kristallisations-Temperatur und der des Abschreckens zu tiefen Temperaturen werden systematisch untersucht. Ein Abschrecken vor der Transformation erzeugt eine große Zahl von Keimen, von denen ein Bruchteil auch bei höheren Temperaturen fortbesteht und die Transformations-Geschwindigkeit so erhöht. Referenz-Volumina, die die Kristallinität von PB-1 bestimmen, werden diskutiert in ihren zwei Formen. Eine neue Kristallinitäts-Skala wird vorgeschlagen, deren Zutreffen durch die konstanten Werte der Ausdehnungs-Koeffizienten der zwei Kristall-Formen, berechnet aus dem tatsächlichen Ausdehnungsverhaltens des semikristallinen Materials, dessen Kristallanteil in einem großen Bereich variierte, gesichert wird.

---

---

Avec 12 figures en 14 détails et 8 tableaux

---

Beursier del'OTAN pendant l'année 1966.