Persistent bissilylated arenium ions

A series of bissilylated arenium ions 1 with different substitution patterns on the aryl ring have been synthesized by hydride abstraction from 2-aryl-substituted 2,6-dimethyl-2,6-disilaheptanes (2) via transient silylium ions. The arenium ions have been identified by their characteristic NMR chemical shifts, (delta(29)Si=19.1-25.6, delta(13)C(ipso) =89.0-102.4, delta(13)C(ortho)=160.9-182.0, delta(13)C(meta)=132.5-146.9, delta(13)C(para)=150.2-169.9) supported by quantum mechanical calculations of structures, energies, and magnetic properties at the B3LYP/6-311G(d,p)//B3LYP/6-31G(d) + DeltaZPVE level of theory. The calculations clearly reveal the charge dispersing and stabilizing effect of the silyl substituents in arenium ions 1. The bissilylated benzenium ion 1a is more stable than the parent benzenium ion (C(6)H(7)(+)) by 37.6 kcalmol(-1). The synthesized arenium ions 1 are stable in solution at room temperature for periods ranging from a few hours to days. This unusual stability is attributed to: 1) the thermodynamic stabilization of the arenium ion by two beta-silyl substituents and 2) the essentially non-nucleophilic reaction conditions (the use of the weakly coordinating [B(C(6)F(5))(4)](-) anion and aromatic hydrocarbons as solvents). Addition of stronger nucleophiles than aromatic hydrocarbons (for example, acetonitrile) results in desilylation of the arenium ion 1 and recovery of the 2-aryl-2,6-disilaheptane moiety.     

Comparative study of separation and determination of triazines by micellar electrokinetic capillary chromatography and nonaqueous capillary electrophoresis: application to residue analysis in natural waters

The separation and determination of a mixture of chloro- and methylthiotriazines in water samples by both micellar electrokinetic capillary chromatography (MEKC) and nonaqueous capillary zone electrophoresis (NA-CZE) were compared. The characteristics of both methods proved to be very similar in terms of separation efficiency and analysis times, but application of these methods for the analysis of triazines in natural waters, with a prior preconcentration step, revealed significant differences. A preconcentration step by solid-phase extraction (SPE) with Oasis HLB cartridges was accomplished for the determination of triazines at sub-ppb levels in drinking and river waters; when NA-CZE was used after this SPE step, electropherograms with fewer interferences and more stable baselines were obtained than when separation was carried out using MEKC. Another aspect related to the application to real samples was the lack of precision encountered upon evaluating the electrophoretic signals generated when using SPE coupled with NA-CZE. Here, we demonstrate the importance of choosing an appropriate internal standard for analyte quantification. It is recommended that a triazine belonging to the same family as that of the triazine to be determined should be used as internal standard.     

Changes of the solution pH due to exposure by high-voltage electric pulses

The change of the pH of a NaCl solution (139-149 mM NaCl) buffered with 5-15 mM sodium phosphates (pH 7.4) during electromanipulation was studied. It has been determined that an increase in the pH value of electroporation solution of a whole chamber volume, caused by the application of electric field pulses, commonly used in cell electromanipulation procedures, can exceed 1-2 pH units. Several materials for the cathode were tested. In all cases a stainless steel anode was utilized. The aluminum cathode gave a two-fold greater DeltapH in comparison with platinum, copper or stainless steel cathodes. In addition, a substantial release of aluminum (up to 1 mg/l) from the cathode was observed. It has also been found that the shift in pH depended on the medium conductivity: DeltapH of the solution, in which sucrose was substituted for NaCl, was about 5 times less. On the basis of the results obtained here, to avoid the plausible undesirable consequences of the cathodic electrolysis processes, in particular under the conditions of strong electric treatment, it could be recommended that chambers with aluminum electrodes not be utilized and one should use strongly buffered solutions of low conductivity and alternating current (sine or square wave) bipolar electric pulses.     

Characterization and determination of 28 elements in fly ashes collected in a thermal power plant in Argentina using different instrumental techniques

Different techniques were selected for comprehensive characterization of seven samples of fly ashes collected from the electrostatic precipitator of the San Nicolás thermal power plant (Buenos Aires, Argentina). Particle size was measured using laser based particle size analyzer. X-ray diffraction powder (XRD) analysis and scanning electron microscopy (SEM) were used to characterize the mineral phase present in the matrix consisting basically of aluminosilicates and large amounts of amorphous material. The predominant crystalline phases were mullite and quartz. Major and minors elements (Al, Ca, Cl, Fe, K, Mg, Na, S, Si and Ti) were detected by energy dispersive X-ray analysis (EDAX). Trace elements (As, Cd, Co, Cr, Cu, Mn, Ni, Pb, Se, V and Zn) content was quantified by inductively coupled plasma optical emission spectrometry (ICP OES). Different acid mixtures and digestion procedures were compared for subsequent ICP OES measurements of the dissolved samples. The digestion procedures used were: i) a mixture of FH + HNO₃ + HClO₄ (open system digestion); ii) a mixture of FH + HNO₃ (MW-assisted digestion); iii) a mixture of HF and aqua regia (MW-assisted digestion). Instrumental neutron activation analysis (INAA) was employed for the determination of As, Ba, Co, Cr, Ce, Cs, Eu, Fe, Gd, Hf, La, Lu, Rb, Sb, Sc, Sm, Ta, Tb, Th, U and Yb. The validation of the procedure was performed by the analysis of two certified materials namely, i) NIST 1633b, coal fly ash and ii) GBW07105, rock. Mean elements content spanned from 41870 μg g^− 1 for Fe to 1.14 μg g^− 1 for Lu. The study showed that Fe (41870 μg g^− 1) ? V (1137 μg g^− 1) > Ni (269 μg g^− 1) > Mn (169 μg g^− 1) are the main components. An enrichment, with respect to crustal average, in many elements was observed especially for As, V and Sb that deserve particular interest from the environmental and human health point of view.     

Sorption of Am<Superscript>3+</Superscript> cations on suspended silicate: Effects of pH,ionic strength,complexing anions,humic acid and metal ions

Sorption of tracer Am³⁺ to silicate particles was studied as a function of pcH (4 to 9) and of ionic strength [0.20M to 1.50M (NaClO₄)] at 298 K. The sorption increased with increased pcH from 4 to 6 above which saturation was observed. The insensitivity of Am³⁺ sorption to increased ionic strength indicates inner-sphere complexation with the surface silicate sites. The effects of different complexing anions such as carbonate, acetate, oxalate, phosphate, citrate, EDTA and humic acid, on Am³⁺ sorption were investigated. Synergistic enhancement in Am³⁺ sorption was observed in the presence of phosphate (4≤pcH≤7) and acetate (4≤pcH≤5) ligands at 0.20M NaClO₄. The presence of the other ligands inhibited Am³⁺ sorption in the order: EDTA > citrate > oxalate > carbonate. Am³⁺ sorption in the presence of HA (25.00 mg/l) increased in the pcH range of 4.0 to 5.5, then decreased. Increased ionic strength enhanced Am³⁺ sorption in the presence of 25.00 mg/l HA for 4≤pcH≤9. The sorption increased in the presence of a mixture of HA (25.00 mg/l) and phosphate (1.00·10⁻³M) as compared to that of HA (25.00 mg/l) alone. The presence of Fe³⁺ (1.00·10⁻⁴M) enhanced Am³⁺ sorption at pcH∼4 but suppressed it from pcH of 5 to 9; 1.00·10⁻⁴M of Ca²⁺ and of UO₂²⁺ ions had no effect on the sorption profile. On leave from Radiochemistry Division, Bhabha Atomic Research Centre, Trombay, Mumbai -400 085, India.     

Water concentration profiles in membranes measured by ESEEM of spin-labeled lipids

Electron spin-echo envelope modulation (ESEEM) spectroscopy of phospholipids spin-labeled systematically down the sn-2 chain was used to detect the penetration of water (D2O) into bilayer membranes of dipalmitoyl phosphatidylcholine with and without 50 mol % cholesterol. Three-pulse stimulated echoes allow the resolution of two superimposed 2H-ESEEM spectral components of different widths, for spin labels located in the upper part of the lipid chains. Quantum chemical calculations (DFT) and ESEEM simulations assign the broad spectral component to one or two D2O molecules that are directly hydrogen bonded to the N-O group of the spin label. Classical ESEEM simulations establish that the narrow spectral component arises from nonbonded water (D2O) molecules that are free in the hydrocarbon chain region of the bilayer membrane. The amplitudes of the broad 2H-ESEEM spectral component correlate directly with those of the narrow component for spin labels at different positions down the lipid chain, reflecting the local H-bonding equilibria. The D2O-ESEEM amplitudes decrease with position down the chain toward the bilayer center, displaying a sigmoidal dependence on position that is characteristic of transmembrane polarity profiles established by other less direct spin-labeling methods. The midpoint of the sigmoidal profile is shifted toward the membrane center for membranes without cholesterol, relative to those with cholesterol, and the D2O-ESEEM amplitude in the outer regions of the chain is greater in the presence of cholesterol than in its absence. For both membrane types, the D2O amplitude is almost vanishingly small at the bilayer center. The water-penetration profiles reverse correlate with the lipid-chain packing density, as reflected by 1H-ESEEM intensities from protons of the membrane matrix. An analysis of the H-bonding equilibria provides essential information on the binding of water molecules to H-bond acceptors within the hydrophobic interior of membranes. For membranes containing cholesterol, approximately 40% of the nitroxides in the region adjacent to the lipid headgroups are H bonded to water, of which ca. 15% are doubly H bonded. Corresponding H-bonded populations in membranes without cholesterol are ca. 20%, of which ca. 6% are doubly bonded.     

Chemical preparation of conductive elastomeric blends: Polypyrrole/EPDM. I. Oxidant particle-size effect

This work describes the preparation of polypyrrole and EPDM rubber blends, PPy/EPDM, by the sorption of pyrrole (vapor phase) in an EPDM matrix containing CuCl₂. We investigated the effect of the oxidant particle-size on the sorption and polymerization equilibrium, electrical conductivity, and mechanical properties of the blends. Independently of the CuCl₂ concentration and polymerization time, the polypyrrole weight fraction in the blend, X_ppy, increases when the oxidant particle-size in changed from 150–250 μm to smaller than 106 μm. For blends containing 50 phr of CuCl₂, obtained following 72 h of exposure to pyrrole, an increase in the Young's Modulus (from 2.2 ± 0.2 to 3.9 ± 0.6 MPa) and an increase in the electrical conductivity (from 10^?9 to 10^?7 S cm^?1) was observed when the oxidant particle-size was decreased. Infrared spectroscopy, thermogravimetric analysis, scanning differential calorimetry, and scanning electron microscopy were used in sample characterization. © 1994 John Wiley & Sons, Inc.     

Flow system to gas capture from a nebulized solution

The use of aerosol produced in a nebulization chamber is proposed as an alternative to gas sample capture in flow systems. This paper describes the coupling of a sampling interface with a flow system, for in situ gas monitoring. Aspects related with the behavior of aerosol formation and gas solubilization in liquid drops are discussed. The method is applied to the determination of residual lime in acidic soils. Aliquots of 5.0 ml of 1.0 mol l⁻¹ HCl were mixed with soil samples (1 g). The CO₂ released from these samples was captured by a nebulized aerosol and determined conductivity. The analytical curve from 1.0×10⁻² to 5.0×10⁻² mol kg⁻¹ CaCO₃ was ploted applying the matrix matching approach. This proposition, allowed an increase in the sensibility with detection limit of 6.0×10⁻³ mol kg⁻¹. The precision was good (R.S.D. <3%) for an analytical frequency of 22 determinations per hour. A fair agreement, at 95% confidence level, was found between the results from the proposed method and certified values of the investigated samples.     

HPTLC Method for Quantification of Apigenin in the Dried Root Powder of Gmelina arborea Linn.

JPC – Journal of Planar Chromatography – Modern TLC - A sensitive high-performance thin-layer chromatographic method has been established for quantification of apigenin in dried root...     

Characterization of Nested Hollow Inorganic Fullerene-like Tungsten Disulfide Nanoparticles Prepared by Solid-Gas Reaction

Non-carbon inorganic fullerene-like(IF) nanoscale materials have recently attracted intense interest due to their nested hollow and nanotube structures,In this letter,IF-WS2 nanoparticles prepared by solid-gas reaction were characterized by X-ray diffraction,Scanning electron microscopy and transmission electron microscopy.The results show that the IF-WS2 nanoparticles have a nested hollow closed spherical structure with diameter of 100-150mm.