Raman study of the rigidity of penta-p-phenylene derivatives used as legs in molecular tripods

Molecular planarity of penta-p-phenylene (P5P) and several substituted derivatives with four side chains of various lengths, including deca(ethylene glycol) groups, is discussed by considering the changes in the intensity ratio between the Raman bands recorded at 1280 and 1220 cm(-1). The intensity ratio between both bands I(1280)/I(1220) shows a small increase with the size of the substituent, indicating a high rigidity for all these compounds, even those with long oligo(ethylene glycol) side chains. This result is important given that these phenylene derivatives are versatile building blocks for the construction of nanometric tripod-shaped adsorbates for biological applications since the side chains should prevent the nonspecific interaction with proteins.     

Capillary electrophoresis-time of flight-mass spectrometry using noncovalently bilayer-coated capillaries for the analysis of amino acids in human urine

A capillary electrophoresis-time of flight-mass spectrometry (CE-TOF-MS) method for the analysis of amino acids in human urine was developed. Capillaries noncovalently coated with a bilayer of Polybrene (PB) and poly(vinyl sulfonate) (PVS) provided a considerable EOF at low pH, thus facilitating the fast separation of amino acids using a BGE of 1 M formic acid (pH 1.8). The PB-PVS coating proved to be very consistent yielding stable CE-MS patterns of amino acids in urine with favorable migration time repeatability (RSDs <2%). The relatively low sample loading capacity of CE was circumvented by an in-capillary preconcentration step based on pH-mediated stacking allowing 100-nL sample injection (i.e. ca. 4% of capillary volume). As a result, LODs for amino acids were down to 20 nM while achieving satisfactory separation efficiencies. Preliminary validation of the method with urine samples showed good linear responses for the amino acids (R(2) >0.99), and RSDs for peak areas were <10%. Special attention was paid to the influence of matrix effects on the quantification of amino acids. The magnitude of ion suppression by the matrix was similar for different urine samples. The CE-TOF-MS method was used for the analysis of urine samples of patients with urinary tract infection (UTI). Concentrations of a subset of amino acids were determined and compared with concentrations in urine of healthy controls. Furthermore, partial least squares-discriminant analysis (PLS-DA) of the CE-TOF-MS dataset in the 50-450 m/z region showed a distinctive grouping of the UTI samples and the control samples. Examination of score and loadings plot revealed a number of compounds, including phenylalanine, to be responsible for grouping of the samples. Thus, the CE-TOF-MS method shows good potential for the screening of body fluids based on the analysis of endogenous low-molecular weight metabolites such as amino acids and related compounds.     

Crystalline structure and optical spectroscopy of Er3+-doped KGd(WO4)2 single crystals

4 )₂ single crystals doped with Er³⁺ have been grown by the flux top-seeded-solution growth method. The crystallographic structure of the lattice has been refined, being the lattice constants a=10.652(4), b=10.374(6), c=7.582(2) Å, β=130.80(2)°. The refractive index dispersion of the host has been measured in the 350–1500 nm range. The optical absorption and photoluminescence properties of Er³⁺ have been characterised in the 5–300 K temperature range. At 5 K, the absorption and emission bands show the (2J+1)/2 multiplet splittings expected for the C₂ symmetry site of Er in the Gd site. The energy positions and halfwidths of the 72 sublevels observed have been tabulated as well as the cross sections of the different multiplets. Six emission band sets have been observed under excitation of the ⁴F_7/2 multiplet. The Judd–Ofelt (JO) parameters of Er³⁺ in KGW have been calculated: Ω₂=8.90×10^-20 cm², Ω₄=0.96×10^-20 cm², Ω₆=0.82×10^-20 cm². Lifetimes of the ⁴S_3/2, ⁴F_9/2, and ⁴I_11/2 multiplets have been measured in the 5–300 K range of temperature and compared with those calculated from the JO theory. A reduction of the ⁴S_3/2 and ⁴I_11/2 measured lifetimes with increasing erbium concentration has been observed, moreover the presence of multiphonon non-radiative processes is inferred from the temperature dependence of the lifetimes. Received: 15 December 1997/Revised version: 10 July 1998     

Mössbauer spectroscopy and X-ray diffraction study of FexMn0:70−xAl0:30 (0:40 < x < 0:70) alloys prepared by mechanical alloying

In order to study the structural and magnetic behaviour of Fe_xMn_0.70?xAl_0.30 (0.40≤x≤0.70) alloys prepared by mechanical alloying, Mössbauer spectroscopy and X‐ray diffraction techniques have been employed. All the alloys were prepared in 24 h and, in addition, for x=0.45 milling times of 4, 8, 12, 16 and 24 h were considered. X‐ray diffraction showed that all samples exhibit bcc‐type reflections. A slight decrease in grain size and a slight increase in lattice parameter with increasing Mn content were observed. For x=0.45, an increase in grain size with milling time has been evidenced. For this composition and 4 h of milling, the more intensive peak (1?1?0) was fitted with three peaks corresponding to that of Mn, Fe and the alloy, respectively. For 12 h milling only bcc peaks of the alloy were obtained. As the Fe concentration was increased beyond x=0.50, a phase change from paramagnetic to ferromagnetic, as well as an increment in the mean hyperfine field with x, was detected. For x=0.45 and 4 h of milling we registered the presence of both a single line, corresponding to the alloy, and a hyperfine field distribution with peaks in 27.5 and 23 T, as well as peaks at lesser fields. These peaks are associated to Fe sites with two or more Al and/or Mn atoms as next neighbours. These results are in agreement with those obtained by X‐ray diffraction.     

Fast Capillary Gas Chromatography: Comparison of Different Approaches

Savings in analysis time in capillary GC have always been an important issue for chromatographers since the introduction of capillary columns by Golay in 1958. In laboratories where gas chromatographic techniques are routinely applied as an analytical technique, every reduction of analysis time, without significant loss of resolution, can be translated into a higher sample throughput and hence reduce the laboratory operating costs. In this contribution, three different approaches for obtaining fast GC separations are investigated. First, a narrow-bore column is used under conventional GC operating conditions. Secondly, the same narrow-bore column is used under typical fast GC conditions. Here, a high oven temperature programming rate is used. The third approach uses a recent new development in GC instrumentation: Flash-2D-GC. Here the column is placed inside a metal tube, which is resistively heated. With this system, a temperature programming rate of 100°/s is possible. The results obtained with each of these three approaches are compared with results obtained on a column with conventional dimensions. This comparison takes retention times as well as plate numbers and resolution into consideration.     

Tri‐Chain Hydrocarbon Surfactants as Designed Micellar Modifiers for Supercritical CO2

Getting their feet wet : Low‐cost hydrocarbon surfactants act as fluid modifiers for supercritical carbon dioxide (scCO₂). Increased terminal branching of the surfactant chains aids micelle formation (see middle picture: CO₂ green), and more chains allows water to be incorporated (right, blue).

     

High-performance liquid chromatography-mass spectrometry-based acetylcholinesterase assay for the screening of inhibitors in natural extracts

The present paper describes a High-performance liquid chromatography-mass spectrometry (LC-MS) methodology for the screening of acetylcholinesterase (AChE) inhibitors in natural extracts. AChE activity of sample components is monitored by a post-column biochemical assay that is based on the separate, sequential mixing of AChE and acetylcholine, respectively, with the HPLC eluate. AChE inhibitors are detected by measuring a decrease of product formation using electrospray MS. Ammonium bicarbonate was used as buffer in order to achieve optimum compatibility between biochemical assay and MS detection conditions. The assay is robust and stable for over 13 h and compares favourably with other AChE assays in terms of stability and sensitivity. IC(50) values of 9-aminoacridine, galanthamine, gallamine, (-)-huperzine A and thioflavin T were determined to be 0.12, 0.38, 6.4, 0.46 and 3.2 microM, respectively. The assay was used to effectively identify an AChE inhibitor present in a crude extract of Narcissus c.v. "Bridal Crown".     

A flow model based on polylinking system

We extend recent work on nonlinear optimal control problems with integer restrictions on some of the control functions (mixed-integer optimal control problems, MIOCP). We improve a theorem (Sager et?al. in Math Program 118(1): 109–149, 2009) that states that the solution of a relaxed and convexified problem can be approximated with arbitrary precision by a solution fulfilling the integer requirements. Unlike in previous publications the new proof avoids the usage of the Krein-Milman theorem, which is undesirable as it only states the existence of a solution that may switch infinitely often. We present a constructive way to obtain an integer solution with a guaranteed bound on the performance loss in polynomial time. We prove that this bound depends linearly on the control discretization grid. A numerical benchmark example illustrates the procedure. As a byproduct, we obtain an estimate of the Hausdorff distance between reachable sets. We improve the approximation order to linear grid size h instead of the previously known result with order ${\sqrt{h}}$ (H?ckl in Reachable sets, control sets and their computation, augsburger mathematisch-naturwissenschaftliche schriften. Dr. Bernd Wi?ner, Augsburg, 1996). We are able to include a Special Ordered Set condition which will allow for a transfer of the results to a more general, multi-dimensional and nonlinear case compared to the Theorems in Pietrus and Veliov in (Syst Control Lett 58:395–399, 2009).     

Ni(HF2)(3-Clpy)4]BF4 (py = pyridine): evidence for spin exchange along strongly distorted F···H···F- bridges in a one-dimensional polymeric chain

[Ni(HF(2))(3-Clpy)(4)]BF(4) (py = pyridine) is a simple one-dimensional (1D) coordination polymer composed of compressed NiN(4)F(2) octahedra that form chains with bridging HF(2)(-) ligands. In spite of significant distortion of the HF(2)(-) bridge, a quasi-1D antiferromagnetic (AFM) behavior was observed with J(FHF) = 4.86 K.     

Measurement and analysis of forces in bubble and droplet systems using AFM

The use of atomic force microscopy to measure and understand the interactions between deformable colloids - particularly bubbles and drops - has grown to prominence over the last decade. Insight into surface and structural forces, hydrodynamic drainage and coalescence events has been obtained, aiding in the understanding of emulsions, foams and other soft matter systems. This article provides information on experimental techniques and considerations unique to performing such measurements. The theoretical modelling frameworks which have proven crucial to quantitative analysis are presented briefly, along with a summary of the most significant results from drop and bubble AFM measurements. The advantages and limitations of such measurements are noted in the context of other experimental force measurement techniques.