Development of a biofuel cell using glucose-oxidase- and bilirubin-oxidase-based electrodes

Biofuel cells have a tremendous opportunity to provide much higher energy densities and smaller footprints than batteries for powering implantable medical devices, leading to less intrusive implantable devices with longer lifetimes. This paper introduces biofuel cell anode and cathode designs based on mediated glucose oxidation by glucose oxidase and oxygen reduction by bilirubin oxidase, respectively. We report here the progress toward the development of components for biofuel cells working in physiological conditions. We have investigated enzymatic electrode formulations that have the potential to achieve higher current densities and longer stability of the electrodes: (a) high surface area by the use of multiscale carbon materials, (b) immobilization of redox mediator on the electrode surface, and (c) use of a protective biocompatible polymer coating. Part of this work was presented at the 213th Electrochemical Society Meeting as a poster     

Microfabricated planar glass gas chromatography with photoionization detection

We report the development of a microfabricated gas chromatography system suitable for the separation of volatile organic compounds (VOCs) and compatible with use as a portable measurement device. Hydrofluoric acid etching of 95 × 95 mm Schott B270 wafers has been used to give symmetrical hemi-spherical channels within a glass substrate. Two matching glass plates were subsequently cold bonded with the channels aligned; the flatness of the glass surfaces resulted in strong bonding through van der Waals forces. The device comprised gas fluidic interconnections, injection zone and 7.5 and 1.4 m long, 320 μm internal diameter capillaries. Optical microscopy confirmed the capillaries to have fully circular channel profiles. Direct column heating and cooling could be achieved using a combination of resistive heaters and Peltier devices. The low thermal conductivity of glass allowed for multiple uniform temperature zones to be achieved within a single glass chip. Temperature control over the range 10–200 °C was achieved with peak power demand of approximately 25 W. The 7.5 m capillary column was static coated with a 2 μm film of non-polar dimethylpolysiloxane stationary phase. A standard FID and a modified lightweight 100 mW photoionization detector (PID) were coupled to the column and performance tested with gas mixtures of monoaromatic and monoterpene species at the parts per million concentration level. The low power GC-PID device showed good performance for a small set of VOCs and sub ng detection sensitivity to monoaromatics.     

OSL and IRSL characteristics of quartz and feldspar from southern California,USA

Southern California comprises of a wide range of diverse landscapes and environments, from high mountains with glacial and periglacial sediments to deserts with large sand dunes, extensive alluvial fans and ephemeral playas. Highly active tectonic processes has exposed ancient (c. 2 Ga) plutonic and metamorphic basement from deep within the crust, while similar Palaeozoic, Mesozoic and Cenozoic rocks are also common. A rich array of volcanic lithologies extending into the late Quaternary complement many thick sedimentary sequences that formed in equally diverse ancient environments typical of an accreting active continental margin. In some locations, notably in the Coachella Valley close to Palm Springs and the Salton Sea, low OSL sensitivity and poor characteristics restrict the application of the quartz SAR protocol to date late Pleistocene and Holocene fluvial sediments. In other locations such as the Malibu coastline, high sensitivity of the quartz OSL signal is observed, despite local source rocks being dominated by volcanic lithologies. Problems of poor quartz characteristics, along with uncertainty in predicting quartz OSL behavior for future dating campaigns poses a significant problem for projects, in particular for neotectonic contexts. While K-feldspar has been used extensively to date eolian and fluvial sediments in southern California, little information regarding signal stability is available. We explore the characteristics of both quartz and feldspar sub-samples from eolian, fluvial, lacustrine environments, in order to help develop mineral selection criteria for optical dating applications and clarify these issues. The importance of radiation quenching in quartz grains recently eroded from bedrock and the role of fires in enhancing OSL sensitivity are considered. The relative bleachability of quartz and feldspar fractions, along with thermal stability considerations is discussed. A simple test for quartz OSL signal contamination based on thermal quenching and assistance, and the susceptibility of the OSL signal to IR bleaching is introduced.     

Digital microfluidics using soft lithography

Although microfluidic chips have demonstrated basic functionality for single applications, performing varied and complex experiments on a single device is still technically challenging. While many groups have implemented control software to drive the pumps, valves, and electrodes used to manipulate fluids in microfluidic devices, a new level of programmability is needed for end users to orchestrate their own unique experiments on a given device. This paper presents an approach for programmable and scalable control of discrete fluid samples in a polydimethylsiloxane (PDMS) microfluidic system using multiphase flows. An immiscible fluid phase is utilized to separate aqueous samples from one another, and a novel "microfluidic latch" is used to precisely align a sample after it has been transported a long distance through the flow channels. To demonstrate the scalability of the approach, this paper introduces a "general-purpose" microfluidic chip containing a rotary mixer and addressable storage cells. The system is general purpose in that all operations on the chip operate in terms of unit-sized aqueous samples; using the underlying mechanisms for sample transport and storage, additional sensors and actuators can be integrated in a scalable manner. A novel high-level software library allows users to specify experiments in terms of variables (i.e., fluids) and operations (i.e., mixes) without the need for detailed knowledge about the underlying device architecture. This research represents a first step to provide a programmable interface to the microfluidic realm, with the aim of enabling a new level of scalability and flexibility for lab-on-a-chip experiments.     

Impact of environmental conditions on the marine natural product bryostatin 1

Marine Natural Products (MNPs), such as bryostatin 1, are exposed to a range of physical and chemical conditions through the life cycle of the host organism. These include exposure to sunlight, oxidizing and reducing agents, cation binding, and adsorption to reactive metal oxide surfaces. Using Fourier Transform-Ion Cyclotron Resonance (FT-ICR), Matrix Assisted Laser Desorption Ionization Mass Spectrometry (MALDI-MS), UV/Vis absorbance spectroscopy, and molecular modeling, we studied the impact of UV light, TiO2, I2, and reaction with FeCl3 on the structure of bryostatin 1. Our results demonstrate that natural conditions transform bryostatin to a number of structures, including one with a molar mass of 806 Da, which we have previously identified in the sediment collected from the Gulf of Mexico. To date, at least 20 different structures of bryostatin have been reported in the literature. This work suggests that these variations may be products of the chemical environment in which the bryozoa Bugula neritina resides and are not the result of genetic variations within Bugula.     

Schnelle und genaue Methoden zur Bestimmung von Phenol

Ohne Zusammenfassung     

Muonium atom addition to pyridine and to the pyridinium cation

Muonium atoms are found to add mainly to the N-atom and to the ortho and meta positions in pyridine in almost equal amounts, giving pyridinyl and 2-azacyclohexadienyl radicals and 3-azacyclohexadienyl radicals, respectively (no addition was observed at the para site); on protonation, as in a sample of PyH⁺ BF₄⁻, the reactivity follows the positive charge density, being enhanced for addition to the N(H⁺) position, reduced for the ortho/meta positions, and now conferring a significant yield of the para isomer. These results for genuine reactions of hydrogen atoms are discussed in view of studies of radical formation in these materials, made using EPR spectroscopy, when they are exposed to γ-rays in cryogenic matrices, for which mechanisms involving charge-neutralization of initial radical ions are proposed. Copyright © 2001 John Wiley & Sons, Ltd.     

Quantification in histopathology—Can magnetic particles help?

Every year, more than 270,000 people are diagnosed with cancer in the UK alone; this means that one in three people worldwide contract cancer within their lifetime. Histopathology is the principle method for confirming cancer and directing treatment. In this paper, a novel application of magnetic particles is proposed to help address the problem of subjectivity in histopathology. Preliminary results indicate that magnetic nanoparticles cannot only be used to assist diagnosis through improving quantification but also potentially increase throughput, hence offering a way of dramatically reducing costs within the routine histopathology laboratory.