Metallacarbenes from diazoalkanes: an experimental and computational study of the reaction mechanism

PCP ligand (1,3-bis-[(diisopropyl-phosphanyl)-methyl]-benzene), and PCN ligand ([3-[(di-tert-butyl-phosphanyl)-methyl]-benzyl]-diethyl-amine) based rhodium dinitrogen complexes (1 and 2, respectively) react with phenyl diazomethane at room temperature to give PCP and PCN-Rh carbene complexes (3 and 5, respectively). At low temperature (-70 degrees C), PCP and PCN phenyl diazomethane complexes (4 and 6, respectively) are formed upon addition of phenyl diazomethane to 1 and 2. In these complexes, the diazo moiety is eta(1) coordinated through the terminal nitrogen atom. Decomposition of complexes 4 and 6 at low temperatures leads only to a relatively small amount of the corresponding carbene complexes, the major products of decomposition being the dinitrogen complexes 1 and 2 and stilbene. This and competition experiments (decomposition of 6 in the presence of 1) suggests that phenyl diazomethane can dissociate under the reaction conditions and attack the metal center through the diazo carbon producing a eta(1)-C bound diazo complex. Computational studies based on a two-layer ONIOM model, using the mPW1K exchange-correlation functional and a variety of basis sets for PCP based systems, provide mechanistic insight. In the case of less bulky PCP ligand bearing H-substituents on the phosphines, a variety of mechanisms are possible, including both dissociative and nondissociative pathways. On the other hand, in the case of i-Pr substituents, the eta(1)-C bound diazo complex appears to be a critical intermediate for carbene complex formation, in good agreement with the experimental results. Our results and the analysis of reported data suggest that the outcome of the reaction between a diazoalkane and a late transition metal complex can be anticipated considering steric requirements relevant to eta(1)-C diazo complex formation.     

Oxygen isotopes of fuel pellets from the fifth collaborative materials exercise and uranium oxides reference materials determined by continuous flow laser fluorination mass spectrometry for nuclear forensic applications

Journal of Radioanalytical and Nuclear Chemistry - Uranium oxides are essential materials in the production process of nuclear fuel for civilian or military applications. As such, identifying their...     

Mechanism of thermal unimolecular decomposition of TNT (2,4,6-trinitrotoluene): a DFT study

The widespread and long-term use of TNT has led to extensive study of its thermal and explosive properties. Although much research on the thermolysis of TNT and polynitro organic compounds has been undertaken, the kinetics and mechanism of the initiation and propagation reactions and their dependence on the temperature and pressure are unclear. Here, we report a comprehensive computational DFT investigation of the unimolecular adiabatic (thermal) decomposition of TNT. On the basis of previous experimental observations, we have postulated three possible pathways for TNT decomposition, keeping the aromatic ring intact, and calculated them at room temperature (298 K), 800, 900, 1500, 1700, and 2000 K and at the detonation temperature of 3500 K. Our calculations suggest that at relatively low temperatures, reaction of the methyl substituent on the ring (C-H alpha attack), leading to the formation of 2,4-dinitro-anthranil, is both kinetically and thermodynamically the most favorable pathway, while homolysis of the C-NO(2) bond is endergonic and kinetically less favorable. At approximately 1250-1500 K, the situation changes, and the C-NO(2) homolysis pathway dominates TNT decomposition. Rearrangement of the NO(2) moiety to ONO followed by O-NO homolysis is a thermodynamically more favorable pathway than the C-NO(2) homolysis pathway at room temperature and is the most exergonic pathway at high temperatures; however, at all temperatures, the C-NO(2) --> C-ONO rearrangement-homolysis pathway is kinetically unfavorable as compared to the other two pathways. The computational temperature analysis we have performed sheds light on the pathway that might lead to a TNT explosion and on the temperature in which it becomes exergonic. The results appear to correlate closely with the experimentally derived shock wave detonation time (100-200 fs) for which only the C-NO(2) homolysis pathway is kinetically accessible.     

On the relationships between kinetic schemes and two-state single molecule trajectories

Trajectories of a signal that fluctuates between two states which originate from single molecule activities have become ubiquitous. Common examples are trajectories of ionic flux through individual membrane channels and of photon counts collected from diffusion, activity, and conformational changes of biopolymers. By analyzing the trajectory, one wishes to deduce the underlying mechanism, which is usually described by a multisubstate kinetic scheme. In previous works [O. Flomenborn, J. Klafter, and A. Szabo, Biophys. J. 88, 3780 (2005); O. Flomenbom and J. Klafter, Acta Phys. Pol. B 36, 1527 (2005)], we divided kinetic schemes that generate two-state trajectories into two types: reducible schemes and irreducible schemes. A full characterization of the reducible ones was given. We showed that all the information in trajectories generated from reducible schemes is contained in the waiting time probability density functions (PDFs) of the two states. It follows that reducible schemes with the same waiting time PDFs are not distinguishable; namely, such schemes lead to identical two-state trajectories in the statistical sense. In this work, we further characterize the topologies of kinetic schemes, now of irreducible schemes, and further study two-state trajectories from the two types of scheme. We suggest various methods for extracting information about the underlying kinetic scheme from the trajectory (e.g., calculate the binned successive waiting times PDFs and analyze the ordered waiting time trajectories), and point out the advantages and disadvantages of each. We show that the binned successive waiting times PDFs are not only more robust than other functions when analyzing finite trajectories, but contain, in most cases, more information about the underlying kinetic scheme than other functions in the limit of infinitely long trajectories. For some cases, however, analyzing the ordered waiting times trajectory may supply unique information about the underlying kinetic scheme.     

Cr bound catalytically active sol–gel siloxane polymers

Several types of Cr bound siloxane polymers were prepared by various modes of polymerization. The co-polymerization of (EtO)₃SiPhCr(CO)₃ and Si(OMe)₄ by the sol–gel process, and its subsequent curing, led to a hydrogenation reactive polymer catalyst. Its catalytic reactivity was retained throughout several cycles, contrary to siloxane polymers prepared by different methods. The hydrogenation reaction was studied with methyl sorbate, 3-nonen-2-one, and 1-octyne. Regio- and stereoselectivities were studied. Cyclohexane as solvent was found to be superior to THF in retaining the catalytic activity upon recycling of the polymeric catalyst in the hydrogenation reactions.     

On the unexpected stability of the dianion of perylene diimide in water--a computational study

It was recently reported (Shirman, J. Phys. Chem. B, 2008, 112, 8855) that the stable dianion of perylene diimide can be prepared in water. Herein, a computational study (using DFT at the M06-2X/6-31++G** level of theory) of this species is presented. It is shown that this dianion is aromatic and that its reaction with water is highly endergonic. The primary cause for this is the stabilization provided by the enhanced aromaticity of the dianion relative to its neutral counterpart. Comparison with other aromatic dianions is also presented.     

A self-powered, one-step chip for rapid, quantitative and multiplexed detection of proteins from pinpricks of whole blood

We describe an automated, self-powered chip based on lateral flow immunoassay for rapid, quantitative, and multiplex protein detection from pinpricks of whole blood. The device incorporates on-chip purification of blood plasma by employing inertial forces to focus blood cells away from the assay surface, where plasma proteins are captured and detected on antibody "barcode" arrays. Power is supplied from the capillary action of a piece of adsorbent paper, and sequentially drives, over a 40 minute period, the four steps required to capture serum proteins and then develop a multiplex immunoassay. An 11 protein panel is assayed from whole blood, with high sensitivity and high reproducibility. This inexpensive, self-contained, and easy to operate chip provides a useful platform for point-of-care diagnoses, particularly in resource-limited settings.     

A generic method for measuring the potential number of structure‐preserving transformations

In many fields of psychology, it may be interesting to measure the potential number of structure‐preserving transformations that exist between succeeding structures. The aim of this article is to present a methodology for measuring the potential number of structure‐preserving transformations between succeeding structures and to illustrate the applicability of the methodology through a case study. The article concludes by discussing the lessons and implications of the proposed methodology for microgenetic research. © Wiley Periodicals, Inc. Complexity, 2012     

Gold Nanoparticle Assemblies on Surfaces: Reactivity Tuning through Capping‐Layer and Cross‐Linker Design

The immobilization of metal nanoparticles (NPs) with molecular control over their organization is challenging. Herein, we report the formation of molecularly cross‐linked AuNP assemblies using a layer‐by‐layer approach. We observed four types of assemblies: 1) small aggregates of individual AuNPs, 2) large aggregates of individual AuNPs, 3) networks of fused AuNPs, and 4) gold islands. Interestingly, these assemblies with the different cross‐linkers and capping layers represent different stages in the complete fusion of AuNPs to afford islands of continuous gold. We demonstrate that the stability toward fusion of the nanoparticles of the on‐surface structures can be controlled by the reactivity of the cross‐linkers and the hydrophilicity/hydrophobicity of the nanoparticles.     

Pyridine modified polyethylene copolymer compatibilizer for melt blended carbon nanotube composites: effects of chain structure and matrix viscosity

The electrical percolation threshold of different polyethylene/carbon nanotube nanocomposites was studied as a function of chain structure, matrix viscosity, and the effect of compatibilizer. The lower the viscosity of the matrix the lower is the percolation threshold, regardless of the chain architecture and degree of crystallization. To improve dispersion a series of acrylic acid copolymer are introduced into the system. The highest concentration of acid co‐monomer that maintain miscibility with the polyethylene matrix is 5 wt.%. The compatibilizer in its pristine form does not have a significant effect on dispersion and on volume resistivity. When the acidic copolymer was modified with aminomethylpyridine, in order to facilitate π–π interaction with the nanotubes, a 4‐decade reduction was recorder for the high viscosity matrices at 10 wt.% compatibilizer loading. Copyright © 2014 John Wiley & Sons, Ltd.