Evaluation of supports and methods for immobilization of enzyme cyclodextringlycosyltransferase

An experimental design with factorial planning was used for the immobilization of the enzyme cyclodextringlycosyltransferase (CGTase) from Bacillus firmus (strain no.37) to select the best combination of support, method of immobilization, and conditions that gives primarily higher average values for the specific immobilized enzyme activity, and secondarily, higher average values for the percentage of protein fixation. The experimental design factors were as follows: supports—controlled-pore silica, chitosan, and alumina; immobilization methods—adsorption, and two covalent bonding methods, either with γ-aminopropyltriethoxysilane or hexamethylenediamine (HEMDA); conditions—7°C without agitation and 26°C with stirring. The best combination of factors that lead to higher average values of the response variables was obtained with immobilization of CGTase in silica with HEMDA at 7°C. However, immobilization in chitosan at 7°C gave the highest immobilized CGTase specific activity, 0.25 μmole of β-CD/(min·mg protein). Physical adsorption gave low specific enzyme activities, and, in general, a high load of enzyme leads to lower specific enzyme activity.     

Synthesis of D-erythro-dihydrosphingosine and D-xylo-phytosphingosine from a serine-derived 1,5-dioxaspiro[3.2]hexane template

[reaction: see text] A serine-derived 1,5-dioxaspiro[3.2]hexane template is shown to be a useful precursor for both aminodiol and aminotriol sphingoid bases by its conversion to D-erythro-dihydrosphingosine and D-xylo-phytoshingosine.     

Reaction of 5-aminopyrazoles with β-dimethylaminopropiophenones. Synthesis of new pyrazolo[3,4-b]pyridines

Several new pyrazolo[3,4-b]pyridines were obtained from the reaction of 5-amino-1-aryl-3-methylpyrazoles 1 with β-dimemylaminopropiophenones 2 in pyridine. The structure elucidation of 4,5-dihydropyrazolo[3,4-b]pyridines 3 is based on nmr measurements and X-ray diffraction. The treatment of compounds 3 with N-bromosuccinimide led to the formation of pyrazolo[3,4-b]pyridines 4 .     

Synthesis of resistant starches in plants

The increased incidence in many countries in lifestyle diseases such as colorectal cancer, cardiovascular disease, and diabetes has led to an enhanced interest in disease-prevention measures that can be delivered to target populations through diet. Resistant starch (RS) is emerging as an important dietary component that has the potential to reduce the incidence of bowel health disorders. However, the range of crop species that can serve as effective sources of RS is limited. In this paper the state of knowledge of the starch biosynthesis pathway is reviewed and opportunities to manipulate crop genetics in order to generate additional sources of RS are discussed. The need for a "whole of chain" approach to delivery of RS to the consumer is highlighted because of the impact that different food-processing technologies can have in maintaining, enhancing, or destroying the RS potential of a raw material or food.     

Spectroscopic study of the water-soluble organic matter isolated from atmospheric aerosols collected under different atmospheric conditions

The composition of the water-soluble organic matter from fine aerosols collected in a rural location during two different meteorological conditions (summer and autumn) was investigated by UV-vis, synchronous fluorescence (with Δλ = 20 nm), FT-IR and CPMAS-¹³C NMR spectroscopies. A seasonal variation in the concentration of total carbon, organic carbon and water-soluble organic carbon was confirmed, with higher values during the autumn and lower values during the summer season. The chemical characterisation of the water-soluble organic matter showed that both samples are dominated by a high content of aliphatic structures, carboxyl groups and aliphatic carbons single bonded to one oxygen or nitrogen atom. However, the autumn sample exhibits a higher aromatic content than the summer sample, plus signals due to carbons of phenol, ketones and methoxyl groups. These signals were attributed to lignin breakdown products which are likely to be released during wood combustion processes. The obtained results put into evidence the major contribution of biomass burning processes in domestic fireplaces during low temperature conditions into both the concentration and the bulk chemical properties of the WSOC from fine aerosols.     

A new phototransformation of methoxycarbonyl-substituted (E,Z,E)-1,3,5-hexatrienes: easy access to ring-annelated 8-oxabicyclo[3.2.1]octa-2,6-diene derivatives

On attempting photochemically induced electrocyclizations of the previously reported 1,6-bismethoxycarbonyl- or 1,6-bistrimethylsilyl-substituted ring-attached (E,Z,E)-1,3,5-hexatrienes 4 b, 4 c and 5 b, 5 c, equilibrium mixtures of the starting materials and their diastereomers, the corresponding (E,Z,Z)-hexatrienes 4 b, 4 c and 5 b, 5 c were obtained. The desired trans-disubstituted ring-annelated cyclohexadienes 9 b and 10 b were formed by subsequent thermal 6pi-electrocyclization of the (E,Z,Z)-hexatrienes 4 b and 5 b in good yields (77-83 %). Upon treating the bissilyl-substituted hexatrienes (E,Z,E)-5 c or (E,Z,Z)-5 c under the same conditions, 6pi-electrocyclizations did occur, but the primary products immediately isomerized to a large extent, and mixtures of the cyclohexane-annelated cyclohexadienes 10 c-12 c along with the dehydrogenation products 13, 14 c were formed. When the bismethoxycarbonyl-substituted hexatriene (E,Z,E)- 5 b was irradiated for an extended period of time (4.5 h), the gradual formation of the oxabicyclo[3.2.1]octa-2,6-diene 17 b by a formal intramolecular hetero-Diels-Alder reaction was observed and 17 b could be isolated in up to 69 % yield. To explore the scope of this new photochemical reaction, the new ring-attached (E,Z,E)-hexatrienes 4 a, 5 a and 6 b were synthesized by twofold Heck reactions from 1,2-dibromocycloalkenes 1-3 (59-66 %). While irridiation of the cyclopentene-attached 1,3,5-hexatrienes only led to decomposition, the cyclohexene- and cycloheptene-attached hexatrienes gave the hetero-Diels-Alder products or other photoproducts depending on the size of the cycloalkene moiety and the nature of the alkoxycarbonyl substituents at the vinyl termini. The photoreaction products 17 b and 18 b which are bicyclic acetals, underwent cleavage upon treatment with a Lewis acid such as Me(3)SiOTf to give the ring-annelated methoxycarbonyl-substituted troponecarboxylates 21 b and 22 b.     

Crystal structures of Sr4Sn2Se9 and Sr4Sn2Se10 and the oxidation state of tin in an unusual geometry

The new ternary selenostannates Sr(4)Sn(2)Se(9) and Sr(4)Sn(2)Se(10) have been synthesized by heating the elements at 1023 K in an argon atmosphere. Their structures were determined by single-crystal X-ray methods. Sr(4)Sn(2)Se(9) crystallizes in a new structure type (Pbam, a = 12.042(2) A, b = 16.252(3) A, c = 8.686(2) A, Z = 4) with Sn(2)Se(6)(4-), SnSe(4)(4-), and Se(2)(2-) subunits. Sr(4)Sn(2)Se(10) (P2(1)2(1)2, a = 12.028(2) A, b = 16.541(3) A, c = 8.611(2) A, Z = 4) has a similar structure with Se(3)(2-) triangles instead of Se(2)(2-) dumbbells. Strontium is 8-fold-coordinated by selenium in both cases. The opening angles between tin and the terminal selenium atoms in the Sn(2)Se(6) subunits are close to 160 degrees , which is nearer a typical Sn(2+) coordination geometry than classical SnSe(4) tetrahedra. This result suggests the tin oxidation state in the Sn(2)Se(6) units to be lower than the expected Sn(4+). This question is examined by self-consistent LMTO and LAPW band structure calculations expanded by the Bader analysis of the charge density to assign reliable atomic charges.     

Determination of hydrazine in polyvinylpyrrolidone by derivatization and square wave voltammetry

A rapid and precise method has been developed for the determination of hydrazine in polyvinylpyrrolidone (PVP). Hydrazine is converted to salicylaldazine by reaction with salicylaldehyde. After extraction, the azine is reduced at –1.56 V versus the SCE at the hanging drop electrode. Detection is accomplished using square wave voltammetry and comparison to an external salicylaldazine standard. The described procedure can detect as little as 70 ng/g hydrazine in PVP.     

Turbidimetric determination of sulphate in waters employing flow injection and lead sulphate formation

An analytical flow-injection procedure based on PbSO₄ colloidal formation is proposed as a turbidimetric determination of sulphate in natural waters. Ethanol-water was used as a medium in order to improve the sensibility of the method. Both chemical and flow variables as well as interfering species were studied. A detection limit of 0.3 μg SO²⁻₄ ml⁻¹ was found, and the analytical range (according to Beer's law) was 2–20 μg SO²⁻₄ ml⁻¹. The precision was better than 3% R.S.D. and the sample throughput was ca. 35 h⁻¹. The method, when compared with a standard methodology, gave good results when applied to water analysis.