Characterization of the solvation environment provided by dilute aqueous solutions of novel siloxane polysoaps using the fluorescence probe pyrene

Solubilization environment afforded by several of the novel allyl glycidyl ether-modified methylhydrosiloxane polymers are investigated using a common polycyclic aromatic hydrocarbon fluorescence probe, pyrene. The backbone of the polymer has been modified by the addition of an alkyl chain of varying length (either C8, C12, or C18) and to differing degrees of substitution. The nomenclature adopted for the purposes of these studies is as follows: "AGENT" represents the backbone polymer with no alkyl substitution, and "OAGENT", "DAGENT", and "SAGENT" are substituted with n-octyl, n-dodecyl, and n-octadecyl, respectively. The percentage of alkyl substitution is designated as 10, 15, and 20%. The pyrene polarity scale (defined as the ratio of the intensity of peak I to peak III) was used to determine the relative dipolarity of the cybotactic region provided by approximately 1 w/w% aqueous polymer solutions compared to 10 mM sodium dodecylsulfate (SDS) micellar solution. Results indicate that 10-15% DAGENT afforded the most hydrophobic solubilization site, followed by 15% OAGENT and 15% SAGENT. In addition, as the degree of alkyl substitution of DAGENT increased from 10 to 20%, the cybotactic region appeared to become more hydrophobic. Furthermore, a deeper investigation into the relative size of the solubilization site revealed that all alkyl-substituted polymers promoted excimer formation at relatively low pyrene concentrations, indicating the possibility of localized concentration enhancement within the solvation pockets and/or compartmentalization of the solute molecules. The pyrene fluorescence excitation data strongly indicates ground-state heterogeneity that is most prominent in AGENT and decreases as the alkyl chain length is increased. This provides a relative sense of the size and shape of the solvation pockets afforded by each polymer solution. An overall analysis of the collected data indicated that these alkyl-substituted polymers may provide a more selective and efficient pseudostationary phase in electrokinetic chromatography with better solvation capacity for hydrophobic compounds compared to SDS.     

Asymmetric total synthesis of rollicosin

[structure: see text] The first total synthesis of rollicosin, a member of a rare subgroup of Annonaceous acetogenins containing two terminal gamma-lactones, is reported. The approach features a highly regio- and stereoselective tandem ring-closing/cross-metathesis reaction for construction of the east-wing lactone and incorporation of the alkyl spacer. Establishment of the C4 stereocenter and addition of the west-wing lactone were achieved by Sharpless asymmetric dihydroxylation and enolate alkylation.     

Probing the glycosidic linkage: UV and IR ion-dip spectroscopy of a lactoside

The beta(1-->4) glycosidic linkage found in lactose is a prevalent structural motif in many carbohydrates and glycoconjugates. Using UV and IR ion-dip spectroscopies to probe benzyl lactoside isolated in the gas phase, we find that the disaccharide unit adopts only a single, rigid structure. Its fully resolved infrared ion-dip spectrum is in excellent agreement with that of the global minimum structure computed ab initio. This has glycosidic torsion angles of phi(H) (H1-C1-O-C4') approximately 180 degrees and psi(H) (C1-O-C4'-H4') approximately 0 degrees which correspond to a rotation of approximately 150 degrees about the glycosidic bond compared to the accepted solution-phase conformation. We discuss the biological implications of this discovery and the generality of the strategies employed in making it.     

Stereoselective synthesis of the cyclic ether core of (+)-laurenyne

A concise enantioselective synthesis of the cyclic ether core of the marine natural product (+)-laurenyne has been accomplished using ring-closing metathesis for medium-ring construction.     

A new approach to predict the biological activity of molecules based on similarity of their interaction fields and the logP and logD values: application to auxins

The activity of a biological compound is dependent both on specific binding to a target receptor and its ADME (Absorption, Distribution, Metabolism, Excretion) properties. A challenge to predict biological activity is to consider both contributions simultaneously in deriving quantitative models. We present a novel approach to derive QSAR models combining similarity analysis of molecular interaction fields (MIFs) with prediction of logP and/or logD. This new classification method is applied to a set of about 100 compounds related to the auxin plant hormone. The classification based on similarity of their interaction fields is more successful for the indole than the phenoxy compounds. The classification of the phenoxy compounds is however improved by taking into account the influence of the logP and/or the logD values on biological activity. With the new combined method, the majority (8 out of 10) of the previously misclassified derivatives of phenoxy acetic acid are classified in accord with their bioassays. The recently determined crystal structure of the auxin-binding protein 1 (ABP1) enabled validation of our approach. The results of docking a few auxin related compounds with different biological activity to ABP1 correlate well with the classification based on similarity of MIFs only. Biological activity is, however, better predicted by a combined similarity of MIFs + logP/logD approach.     

Spatial profiling invertebrate ganglia using MALDI MS

The ability of MALDI TOF MS to spatially map peptides and proteins directly from a tissue is an exciting advance to imaging mass spectrometry. Recent advances in instrumentation for MS have resulted in instruments capable of achieving several micron spatial resolution while acquiring high-resolution mass spectra. Currently, the ability to obtain high quality mass spectrometric images depends on sample preparation protocols that often result in limited spatial resolution. A number of sample preparation and matrix deposition protocols are evaluated for spatial profiling of Aplysia californica exocrine gland and neuronal tissues. Such samples are different from mammalian tissues, but make good targets for method optimization because of the wealth of biochemical information available on neuropeptide processing and distribution. Electrospray matrix deposition and a variety of freezing methods have been found to be optimum for these invertebrate tissues, with the exact protocols being tissue dependent.     

Influence of synthesis route on the properties of doped lanthanum cobaltite and its performance as an electrochemical reactor for the partial oxidation of natural gas

La(0.6)Sr(0.4)Co(0.2)Fe(0.8)O(3-delta)(LSCF) perovskite powders have been synthesised by solid-state reaction, co-precipitation, drip pyrolysis and citrate gel routes, and characterised using XRF, XRD, SEM and BET. Co-precipitation using oxalic acid or aqueous ammonia as precipitant failed to achieve the correct chemical composition. Perovskite structures were achieved in all other cases. Surface areas ranging from 0.6 to 17.4 m(2) g(-1) were obtained, which was reflected in the different microstructures observed. The citrate gel product exhibited a convoluted network morphology resulting in its large surface area. Thin-walled (approximately 200 microm) tubular membranes have been manufactured from the LSCF powders using viscous plastic processing. The tubes have been characterised using a custom-built gas analysis rig with on-line mass spectrometry. Porosity levels of the membranes were found to be very low (<0.1%). The spontaneous oxygen flux across the tubular membranes was determined as a function of temperature. Oxygen permeation rates ranged from 0.1 to 0.3 micromol cm(-2) s(-1) at 1273 K. The catalytic behaviour of the LSCF tubes towards methane oxidation has been studied using temperature programmed reaction and conventional catalytic measurements. The tubes favoured combustion reactions, with smaller amounts of partial oxidation and oxidative coupling products observed. Powder coatings have been incorporated to establish the effect of increasing surface area.     

Picosecond acoustic transmission measurements. II. Probing high frequency structural relaxation in supercooled glycerol

The high frequency acoustic response of liquids is measured in a manner directly analogous to conventional ultrasonic measurements. Two thin metal films act as acoustic transducer and receiver for a liquid layer between them. Pulsed optical excitation generates high bandwidth wave packets in the transducer, and these are detected in the receiver after damping and dispersion by the liquid. This initial measurement probes structural relaxation dynamics of glycerol in the frequency range 2-20 GHz, for temperatures between 235 and 291 K. The analysis presented here demonstrates the presence of excess relaxation, not accounted for by either the alpha or beta relaxation of the mode-coupling theory, and suggests the presence of constant loss in the susceptibility spectrum of supercooled glycerol.     

The Catalytic Oxidative Coupling of Methane

One of the great challenges in the field of heterogeneous catalysis is the conversion of methane to more useful chemicals and fuels. A chemical of particular importance is ethene, which can be obtained by the oxidative coupling of methane. In this reaction CH₄ is first oxidatively converted into C₂H₆, and then into C₂H₄. The fundamental aspects of the problem involve both a heterogeneous component, which includes the activation of CH₄ on a metal oxide surface, and a homogeneous gas-phase component, which includes free-radical chemistry. Ethane is produced mainly by the coupling of the surface-generated CH radicals in the gas phase. The yield of C₂H₄ and C₂H₆ is limited by secondary reactions of CH radicals with the surface and by the further oxidation of C₂H₄, both on the catalyst surface and in the gas phase. Currently, the best catalysts provide 20% CH₄ conversion with 80% combined C₂H₄ and C₂H₆ selectivity in a single pass through the reactor. Less is known about the nature of the active centers than about the reaction mechanism; however, reactive oxygen ions are apparently required for the activation of CH₄ on certain catalysts. There is spectroscopic evidence for surface O^? or O ions. In addition to the oxidative coupling of CH₄, cross-coupling reactions, such as between methane and toluene to produce styrene, have been investigated. Many of the same catalysts are effective, and the cross-coupling reaction also appears to involve surface-generated radicals. Although a technological process has not been developed, extensive research has resulted in a reasonable understanding of the elementary reactions that occur during the oxidative coupling of methane.