Thermal behavior of loratadine

Simultaneous thermogravimetry (TG) and differential thermal analysis (DTA) techniques were used for the characterization the thermal degradation of loratadine, ethyl-4-(8-chloro-5,6-dihydro-11H-benzo[5,6]cyclohepta[1,2-b]pyridin-11-ylidine)-1-piperidinecarboxylate. TG analysis revealed that the thermal decomposition occurs in one step in the 200–400°C range in nitrogen atmosphere. DTA and DSC curves showed that loratadine melts before the decomposition and the decomposition products are volatile in nitrogen. In air the decomposition follows very similar profile up to 300°C, but two exothermic events are observed in the 170–680°C temperature range. Flynn–Wall–Ozawa method was used for the solid-state kinetic analysis of loratadine thermal decomposition. The calculated activation energy (E _a) was 91±1 kJ mol^–1 for α between 0.02 and 0.2, where the mass loss is mainly due to the decomposition than to the evaporation of the decomposition products.     

Equilibrium and kinetic aspects of the uptake of poly(ethylene oxide) by copolymer microgel particles of N-isopropylacrylamide and acrylic acid

The use of microgels for controlled uptake and release has been an area of active research for many years. In this work copolymer microgels of N-isopropylacrylamide (NIPAM) and acrylic acid (AAc), containing different concentrations of AAc and also cross-linking monomer, have been prepared and characterized. These microgels are responsive to pH and temperature. As well as monitoring the equilibrium response to changes in these variables, the rates of swelling/de-swelling of the microgel particles, on changing either the pH or the temperature, have also been investigated. It is shown that the rate of de-swelling of the microgel particles containing AAc is much faster than the rate of swelling, on changing the pH appropriately. This is explained in terms of the relative mobilities of the H(+) and Na(+) ions, in and out of the particles. It was observed that the microgels containing AAc, at pH 8, de-swelled relatively slowly on heating to 50 degrees C from 20 degrees C. This is attributed to the resistance to collapse associated with the large increase in counterion concentration inside the microgel particles. The swelling and de-swelling properties of these copolymer microgels have also been investigated in aqueous poly(ethylene oxide) (PEO) solutions, of different MW (2000-300 000). The corresponding absorbed amounts of PEO from solution onto the microgels have also been determined using a depletion method. The results, as a function of AAc content, cross-linker concentration, PEO MW, pH, and temperature, have been rationalized in terms of the ease and depth of penetration of the PEO chains into the various microgel particles and also the H-bonding associations between PEO and either the -COOH of the AAc moeities and/or the H of the amide groups (much weaker). Finally, the adsorption and desorption of the PEO molecules in to and out of the microgel particles have been shown to be extremely slow compared to normal diffusion time scales for polymer adsorption onto rigid surfaces.     

Separation and quantitation of colour pigments of chili powder (Capsicum frutescens) by high-performance liquid chromatography-diode array detection

The performance of reversed-phase thin-layer (RP-TLC) and reversed-phase high-performance liquid chromatography (RP-HPLC) was compared for the separation and determination of the colour pigments of chili (Capsicum frutescens) powder using a wide variety of eluent systems. No separation of pigments was achieved in RP-TLC, however, it was established that tetrahydrofuran shows an unusually high solvent strength. RP-HPLC using water-methanol-acetonitrile gradient elution separated the chili pigments in many fractions. Diode array detection (DAD) indicated that yellow pigments are eluted earlier than the red ones and chili powder contains more yellow pigments than common paprika powders. It was established that the very different absorption spectra of pigments make the use of DAD necessary.     

The reaction of aromatic α,β-unsaturated ketones with 4,5-diamino-1,6-dihydropyrimidin-6-ones

The reaction of 4,5-diamino-1,6-dihydropyrimidin-6-ones 1 with one equivalent of the chalcones 2 leads in an acidic medium to the formation of the 2,4-diaryl-2,3,6,7-tetrahydro-1H-pyrimido[4,5-b][1,4]diazepin-6-ones 3a-m . The structure elucidation of the products is based on detailed nmr investigations including selective ¹³C[¹H] decoupling experiments.     

Multivariate monitoring of soybean oil ethanolysis by FTIR

In this work, an analytical procedure was developed to monitor the ethanolysis of degummed soybean oil (DSO) using Fourier-transformed mid-infrared spectroscopy (FTIR) and methods of multivariate analysis such as principal component analysis (PCA) and partial least squares regression (PLS). The triglycerides (reagents) and ethyl esters (products) involved in ethanolysis were shown to have similar FTIR spectra. However, when the FTIR spectra derived from seven standard mixtures of triolein and ethyl oleate were treated by PCA at the region that represents the CO stretching vibration of ester groups (1700-1800 cm⁻¹), only two principal components (PC) were shown to capture 99.95% of the total spectral variance (92.37% for the former and 7.58% for the latter PC). This observation supported the development of a multivariate calibration model that was based on the PLS regression of the FTIR data. The prevision capability of this model was measured against 40 reaction aliquots whose ester content was previously determined by size exclusion chromatography. Only small discrepancies were observed when the two experimental data sets were treated by linear regression (R²=0.9837) and these deviations were attributed to the occurrence of non-modeled transient species in the reaction mixture (reaction intermediates), particularly at short reaction times. Therefore, the FTIR/PLS model was shown to be a fast and accurate method to predict reaction yields and to follow the in situ kinetics of soybean oil ethanolysis.     

Density-functional study of mechanisms for the cofactor-free decarboxylation performed by uroporphyrinogen III decarboxylase

Uroporphyrinogen III decarboxylase catalyzes the fifth step in heme biosynthesis: the elimination of carboxyl groups from the four acetate side chains of uroporphyrinogen III to yield coproporphyrinogen III. The enzyme acts by successively protonating each of the four pyrrole rings present in the substrate, thereby allowing decarboxylation of their side chains, but the identity of the proton donors has not been established yet. Tyr164 has been suggested as a proton donor, and Asp86 has been proposed to act either as a proton donor or as an intermediate-stabilizing residue. We have performed density-functional calculations to study this reaction mechanism, and found that the rate-limiting step is substrate protonation, rather than decarboxylation. Surprisingly, whereas Tyr164 is unable to protonate the substrate, this protonation can be effected by a nearby arginine residue (Arg37), with a free energy barrier of 21.4 kcal.mol(-1), in remarkable agreement with the experimental value of 19.5 kcal.mol(-1). The central positioning of this residue in close proximity to all four pyrrole rings in the substrate may play a key role in the sequential activation of each of these moieties.     

Separation of fluorescent 1,N6 ethenoderivatives of diadenosine polyphosphates and their enzymatic degradation products by reversed-phase high-performance liquid chromatography

Summary The retention, selectivity and elution order of fluorescent 1,N⁶-etheno derivatives of diadenosine polyphosphates and their enzymatic degradation products on octadecyl and phenyl-bonded silica columns have been studied as a function of mobile phase pH, ionic strength and organic modifier content. Good separations of the compounds of interest were achieved using mobile phases of around 0.1M potassium phosphate buffers at neutral pH containing approximately 10% methanol or 4% acetonitrile for C₁₈ columns and 5% methanol or 1.5% acetonitrile for phenyl columns. The data obtained were used to establish isocratic assays for diadenosine polyphosphate cleaving activities from chromaffin cells using Di(1,N⁶-ethenoadenosine) polyphosphates as fluorogenic substrate analogues followed by fluorescence detection.     

(Z)-3-p-tolylsulfinylacrylonitrile as a chiral dienophile: diels-alder reactions with furan and acyclic dienes

The behavior of (Z)-3-p-tolylsulfinylacrylonitrile (1) as a chiral dienophile has been evaluated from its reactions with furan and acyclic dienes. Electrostatic interactions of the cyano group with the sulfinyl one restrict the conformational mobility around the C-S bond, thus controlling the pi-facial selectivity, which is almost complete in all cases, the approach of the diene from the less-hindered face of the dienophile (that bearing the lone electron pair) in the predominant rotamer being the favored one. The regioselectivity is also completely controlled by the cyano group. Additionally, the reactivity of compound 1 as well as its endo-selectivity are both higher than those observed for the corresponding (Z)-3-sulfinylacrylates, thus proving the potential of sulfinylnitriles as chiral dienophiles.     

Studies on diastereoselective reduction of cyclic β-ketoesters with boron hydrides. Part 4: The reductive profile of functionalized cyclohexanone derivatives

Reduction of 2-allyl-2-carboalkoxycyclohexanones (3d-f), 2-propyl-2-carboethoxycyclohexanone (3g) and 2-benzyl-2-carboethoxycyclohexanone (3h) with boron hydrides in the presence and absence of several chelating agents were studied. Molecular modeling studies using semiempirical PM3 method were performed in order to find a suitable explanation of the diastereoselection of ketone carbonyl faces during the reductive process, which yielded trans-2-allyl-2-carboethoxycyclohexanol (6e) and cis-2-allyl-2-carboethoxycyclohexanol (7e) in good diastereomeric excess by using inexpensive sodium and tetrabutylammonium borohydrides.