Reactivity studies,structural characterization,and thermolysis of cubic titanosiloxanes: precursors to titanosilicate materials which catalyze olefin epoxidation

The cubic titanosiloxane [RSiO(3)Ti(OPr(i))](4) (R = 2,6-Pr(2)(i)C(6)H(3)NSiMe(3)) (1) is found to be relatively inert in its attempted reactions with alcohols and other acidic hydrogen containing compounds. The reaction of 1 with silanol (Bu(t)O)(3)SiOH however proceeds over a period of approximately 3 months to result in the hydrolysis of (Bu(t)O)(3)SiOH and yield the transesterification product [RSiO(3)Ti(OBu(t))](4) (2) rather than the expected [RSiO(3)Ti(OSi(OBu(t))(3))](4). Products 1 and 2 have been characterized by elemental analysis, thermal analysis, and spectroscopic techniques (IR, EI-MS, and NMR). The solid-state structures of both 1 and 2 have been determined by single-crystal X-ray diffraction studies. Compounds 1 and 2 are isomorphous and crystallize in a cubic space group with a central cubic Ti(4)Si(4)O(12) core. Solid state thermolysis of 1 was carried at 450, 600, 800, 900, 1000, and 1200 degrees C in air, and the resulting titanosilicate materials 1a-f were characterized by spectroscopic (IR and DR UV), powder XRD, and electron microscopic methods. While, the presence of Ti-O-Si linkages appears to be dominant in the samples prepared at lower temperatures (450-800 degrees C), phase separation of anatase and rutile forms of TiO(2) occurs at temperatures above 900 degrees C as revealed by IR spectral and PXRD studies. The presence of octahedral titanium centers was observed by DR UV spectroscopy for the samples heated at higher temperatures. The use of new titanosilicate materials as catalysts for olefin epoxidation has been investigated. The titanosilicate materials produced at temperatures below 800 degrees C with a large number of Ti-O-Si linkages (or tetrahedral titanium centers) were found to be more active catalysts compared to the materials produced above 900 degrees C. The observed conversion in the epoxidation reactions was found to be somewhat low although the selectivity of the epoxide formation over the other possible oxidized products was found to be very good.     

Potential response in the uncatalyzed bromate oscillatory system

The potential response of the platinum indicator electrode in the uncatalyzed bromate oscillator (UBO) with three different substrates, namely gallic acid (GA), pyrogallol (PG) and veratraldehyde (VA) has been analyzed. The large amplitude oscillations obtained with a Pt electrode are due to the sequential response of the indicator electrode to the varying concentration ratios of the redox couples present in the reaction mixture.     

Thermochemical and kinetic studies on the effects of cobalt salicylate on the oxidative degradation of polystyrene

The effect of cobalt salicylate on the oxidative degradation and ignition of polystyrene has been studied. It was found that cobalt salicylate sensitizes both the degradation and ignition of polystyrene by facilitating electron-transfer processes in the propagation step. From thermochemical and kinetic studies it was found that the cobalt ion, owing to its ability to exist in variable valence states, promotes electron transfer in the propagation step of polymer degradation, increasing the rate of propagation and consequently the overall rate. Using solid-phase thermal ignition theory, an attempt has been made to explain the sensitization of ignition by the cobalt ion.

---

Zusammenfassung Die Wirkung von Kobaltsalicylat auf den oxydativen Abbau und die Entzündung von Polystyrol wurde untersucht. Es wurde festgestellt, daß Kobaltsalicylat sowohl den Abbau als auch die Entzündung des Polystyrols durch Erleichterung von Elektrontransferprozessen im Kettenfortpflanzungsschritt begünstigt. Thermochemische und kinetische Untersuchungen ergeben, daß das Kobaltion infolge seiner Fähigkeit, in mehreren Valenzstufen aufzutreten, den Elektronentransfer im Kettenfortpflanzungsschritt erleichtert wodurch die Geschwindigkeit der Kettenfortpflanzung und damit die Geschwindigkeit des Gesamtprozesses erhöht wird. Basierend auf der Theorie der thermischen Festphasenentzündung wird ein Versuch unternommen, Erleichterung der Entzündung durch Kobaltionen zu erklären.

---

. , , . , , , , . , .

     

Enrichment of ligands for the serotonin receptor using the Shape Signatures approach

Shape Signatures, a new 3-dimensional molecular comparison method, has been adapted to rank ligands of the serotonin receptors. A set of 825 agonists and 400 antagonists together with approximately 10,000 randomly chosen compounds from the NCI database were used in this study. Both 1D and 2D Shape Signature databases were created, and enrichment studies were carried out. Results from these studies reveal that the 1D Shape Signature approach is highly efficient in separating agonists from a mixture of molecules which includes compounds randomly selected from the NCI database taken as inactives. It is also equally effective at separating agonists and antagonists from a pool of active ligands for the serotonin receptor. Parallel enrichment studies using 2D shape signatures showed high selectivity with more restricted coverage due to the high specificity of 2D signatures. The influence of conformational variation of the shape signature on enrichment was explored by docking a subset of ligands into the crystal structure of serotonin N-acetyltransferase. Enrichment studies on the resulting "docked" conformations produced only slightly improved results compared with the CORINA-generated conformations.     

Structures of Addition Products of Acetylenedicarboxylic Acid Esters with Various Dinucleophiles. An application of C,H-spin-coupling constants

Heterocyclic compounds obtained by addition of acetylenedicarboxylic acid esters to thioureas, cyclic amidines and o-difunctionalized aromatic systems have been studied by ¹³C-NMR. In particular, C, H-spin-coupling constants over two and three bonds were used to differentiate between the various constitutional isomers and to establish the configuration of trisubstituted exocyclic C, C-double bonds. The configurational significance and diagnostic value of vicinal cis and trans C,H-spin coupling is again demonstrated in the present series.     

Block copolymerization initiated by Mn(III)-poly(ethylene glycol) redox system — general features and kinetics

The kinetics and mechanism of thermal polymerization of acrylonitrile initiated by Mn(III) pyrophosphate — poly(ethylene glycol) (PEG, molecular weight 6000) redox system in aqueous sulfuric acid medium was studied in the temperature range 30–60°C. The overall rates of polymerization and the disappearance of Mn³⁺ were determined. The polymerization was initiated by the organic free radical produced from the Mn³⁺-PEG reaction and the termination was by the metal ions. The rate of polymerization of acrylonitrile was found to be directly proportional to the square of the monomer concentration and first power of PEG concentration, and inversely proportional to the concentration of Mn³⁺. The rate of manganic ion disappearance was found to be directly proportional to manganic ion concentration and PEG concentration, and independent of the monomer concentration. Based on these observations, a plausible reaction scheme was suggested and suitable kinetic expressions were evaluated.     

Diglycidyl ether of bisphenol-A epoxy resin–polyether sulfone/polyether sulfone ether ketone blends: phase morphology, fracture toughness and thermo-mechanical properties

The properties of diglycidyl ether of bisphenol-A epoxy resin toughened with poly(ether sulfone ether ketone) (PESEK) and poly(ether sulfone) (PES) polymers were investigated. PESEK was synthesised by the nucleophilic substitution reaction of 4,4’-difluorobenzophenone with dihydroxydiphenylsulfone using sulfolane as solvent and potassium carbonate as catalyst at 230 °C. The T _g–composition behaviour of the homogeneous epoxy resin/PESEK blend was modelled using Fox, Gordon–Taylor and Kelley–Bueche equations. A single relaxation near the glass transition of epoxy resin was observed in all the blend systems. From dynamic mechanical analysis, the crosslink density of the blends was found to decrease with increase in the thermoplastic concentration. The storage modulus of the epoxy/PESEK blends was lower than that of neat resin, whilst it is higher for epoxy/PES blends up to glass transition temperature, thereafter it decreases. Scanning electron microscopic studies of the blends revealed a homogeneous morphology. The homogeneity of the blends was attributed to the similarity in chemical structure of the modifier and the cured epoxy network and due to the H-bonding interactions between the blend components. The fracture toughness of epoxy resin increased on blending with PESEK and PES. The increase in fracture toughness was due to the increase in ductility of the matrix. The thermal stability of the blends was comparable to that of neat epoxy resin.     

Quantenmechanische Untersuchungen von Atom-, Bindungs-und Molekülpolarisierbarkeiten,spektroskopische Untersuchungen der Schwingungskonstanten und statistische Thermodynamik: Perchloryl- und Perbromylfluorid

Zusammenfassung Perchloryl- und Perbromylfluorid haben dreizählige Symmetrie. Ihre IR- und Ramanspektren sowie die Ergebnisse von Untersuchungen der Molekülstruktur und andere spektroskopische Untersuchungen werden kurz besprochen. Aus den verschiedenen quantenmechanischen Modellen wird das Deltafunktion-Potentialmodell, das aus der Variationsmethode und den Deltafunktions-Elektronenwellenfunktionen beruht, ausgewählt, um die Atompolarisierbarkeiten, die zur Bindungsachse parallelen und auf sie senkrecht stehenden Beiträge der bindenden und der nichtbindenden Elektronen zur Polarisierbarkeit und die mittlere molekulare Polarisierbarkeit der beiden Moleküle zu berechnen. Mit Hilfe gruppentheoretischer Überlegungen werden die Konstanten der potentiellen Energie berechnet. Hierzu wird ein Bindungskraftfeld mit sechs Konstanten angenommen. Für das erhaltene Kraftfeld werden für 298 und 500 °K die Wurzeln der mittleren Amplitudenquadrate der gebundenen und der nichtgebundenen Atompaare berechnet. Unter der Annahme des Modells eines starren Rotators und harmonischen Oszillators werden für den Temperaturbereich 200 bis 2000 °K die Enthalpiefunktion, die freie Energiefunktion, die Entropie und die Molwärme der beiden Moleküle berechnet. Die Ergebnisse werden hinsichtlich der Natur der beiden in den Molekülen vorliegenden charakteristischen Bindungen besprochen.

---

Quantum mechanical studies of atomic, bond, and molecular polarizabilities, spectroscopic studies of vibrational constants, and statistical thermodynamics: Perchloryl and perbromyl fluorides

Perchloryl and perbromyl fluorides possessing a three-fold symmetry have been briefly analyzed for the infrared asorption and Raman spectra, molecular structural studies, and other spectroscopic investigations. Among the various quantum mechanical models, the delta-function potential model based on the variational method and delta-function electronic wave functions has been employed here to evaluate the atomic polarizabilities, the contributions by the bonding and nonbonding electrons to the bond parallel component of the polarizability, the bond perpendicular component of the polarizability, and the mean molecular polarizability for these two molecules. On the basis of group theoretical considerations, the potential energy constants have been evaluated by employing a six-constant valence force field. The root-mean-square amplitudes for both bonded an nonbonded atom pairs have been computed at the temperatures 298 °K and 500 °K from the developed force field. On the basis of a rigid rotator and harmonic oscillator model, enthalpy function, free energy function, entropy, and heat capacity have also been computed for the temperatures from 200 °K to 2000 °K for these two molecules. The results have been discussed in relation to the nature of the two characteristic bonds involved in both the molecular systems.

---

---

Mit 7 Abbildungen     

Monomeric, tetrameric, and polymeric copper di-tert-butyl phosphate complexes containing pyridine ancillary ligands

The reaction of di-tert-butyl phosphate (((t)BuO)(2)P(O)(OH), dtbp-H) with copper acetate in the presence of pyridine (py) and 2,4,6-trimethylpyridine (collidine) has been investigated. Copper acetate reacts with dtbp-H in a reaction medium containing pyridine, DMSO, THF, and CH(3)OH to yield a one-dimensional polymeric complex [Cu(dtbp)(2)(py)(2)(mu-OH(2))](n) (1) as blue hollow crystalline tubes. The copper atoms in 1 are octahedral and are surrounded by two terminal phosphate ligands, two pyridine molecules, and two bridging water molecules. The mu-OH(2) ligands that are present along the elongated Jahn-Teller axis are responsible for the formation of the one-dimensional polymeric structure. Recrystallization of 1 in a DMSO/THF/CH(3)OH mixture results in the reorganization of the polymer and its conversion to a more stable tetranuclear copper cluster [Cu(4)(mu(3)-OH)(2)(dtbp)(6)(py)(2)] (2) in about 60% yield. The molecular structure of 2 is made up of a tetranuclear core [Cu(4)(mu(3)-OH)(2)] which is surrounded by six bidentate bridging dtbp ligands. While two of the copper atoms are pentacoordinate with a tbp geometry, the other two copper atoms exhibit a pseudooctahedral geometry with five normal Cu-O bonds and an elongated Cu-O linkage. The pentacoordinate copper centers bear an axial pyridine ligand. The short Cu.Cu nonbonded distances in the tetranuclear core of 2 lead to magnetic ordering at low temperature with an antiferromagnetic coupling at approximately 20 K (J(P) = -44 cm(-1), J(c) = -66 cm(-1), g = 2.25, and rho = 0.8%). When the reaction between di-tert-butyl phosphate (dtbp-H) and copper acetate was carried out in the presence of collidine, large dark-blue crystals of monomeric copper complex [Cu(dtbp)(2)(collidine)(2)] (3) formed as the only product. A single-crystal X-ray diffraction study of 3 reveals a slightly distorted square-planar geometry around the copper atom. Thermogravimetric analysis of 1-3 revealed a facile decomposition of the coordinated ligands and dtbp to produce a copper phosphate material around 500 degrees C. An independent solid-state thermolysis of all the three complexes in bulk at 500-510 degrees C for 2 days produced copper pyrophosphate Cu(2)P(2)O(7) along with small quantities of Cu(PO(3))(2) as revealed by DR-UV spectroscopic and PXRD studies.