Novel solid-phase extraction and preconcentration technique coupled with ICP-AES for the determination of Cr(III), Ni(II), and Zn(II) in various water samples

Newly synthesized 2-propylpiperidine-1-carbodithioate (2-PPC) was used for the extraction of Cr(III), Ni(II), and Zn(II) from various water samples. In the present investigation, the use of a syringe loaded with sorbent for the separation and enrichment of Cr(III), Ni(II), and Zn(II) prior to their determination by inductively coupled plasma-atomic emission spectrometry (ICP-AES) was proposed to substitute the batch and column techniques. The described method was compared with the column technique with respect to fastness, simplicity, recovery, and risk of contamination. The syringe was loaded with 1.0 g of sorbent in order to retain the analyte elements. Next, 7.0 mL of sample solution (pH 5.0 ± 0.2) was drawn into the syringe in 15 s and discharged over 15 s. Then, an eluent (3.0 M HCl) was drawn into the syringe and ejected back to desorb the analyte elements. At the optimum conditions, the percentage recoveries of Cr(III), Ni(II), and Zn(II) were in the range of 94.50 to 99.62% with a standard deviation (S.D.) of 0.03%. The elements could be concentrated by drawing and discharging several portions of sample successively and eluting only one time. The detailed study of various interferences proved the method to be highly selective. The risk of contamination is less than that with the column technique. The method was successfully applied to the determination of Cr(III), Ni(II), and Zn(II) in spiked and natural water samples. The results obtained are in good agreement with those obtained by the reported methods at the 95% confidence level. The text was submitted by the authors in English.     

Molecular constants of substituted ethylene-type molecules: IV. Inertia defects and rotational constants of vinyl halides and their deuterated derivatives

The inertia defects of some vinyl halides and their deuterated derivatives have been calculated on the basis of the general formulation developed by Oka and Morino. The initial sets of Urey-Bradley force constants, based on published data, were adjusted by a least squares procedure until they reproduced the fundamental vibrational frequencies satisfactorily. The Coriolis coupling constants which satisfy the sum rules derived were evaluated and used to calculate the inertia defect in the ground vibrational state. The theoretical values of the inertia defect are used to determine the rotational constant A which cannot otherwise be accurately determined from an “a” type transition.     

On a new partitioning of the Hamiltonian in many-body calculation of pair-correlation energies in closed-shell systems

We introduce here a new partitioning of the Hamiltonian in calculating pair-correlation energies using many-body perturbation theory, by which we are able to eliminate the off-diagonal particle–hole (p–h) ladders exactly to all orders in the perturbation expansion. In this formulation, the particle states turn out to be different for each distinct pair of hole states in the correlation energy calculation. We have also included the contributions of the diagonal particle–particle (p–p) and hole–hole ladders exactly to all orders. The effect of the off-diagonal p–p ladders has been estimated for each pair by computing the third-, foruth- and fifth-order energies. For highly symmetric systems the present partitioning yields in general symmetry-broken orbitals. Here one may use an average kind of partitioning for all the partners of the degenerate sets, which restores the symmetry and at the same time ensures cancellation of the p–h ladders exactly at the lowest order and approximately at the higher orders. Results are presented for a selection of 6π-electron conjugated systems. The correlation energy for each pair is in excellent agreement with that obtained from a partial CI calculation involving all double excitations from this pair. The advantages of implementing the present scheme in larger systems has been discussed.     

Synthetische Versuche in der Gruppe hypotensiv wirksamer Alkaloide, 13. Mitt.: Synthese vondl-10-Methyldeserpidin,dl-10-Äthoxydeserpidin unddl-10-Methylmercapto-deserpidin

Zusammenfassung Die durch Umsetzung von 5-Methyltryptamin, 5-Äthoxytryptamin und 5-Methylmercapto-tryptamin (I, R=CH₃, OC₂H₅ bzw. SCH₃) mit dem racemischen Aldehyd-Ester II entstandenenSchiffschen Basen wurden durch Natriumborhydrid-Reduktion in Methanol unter gleichzeitiger Cyclisierung und Desacetylierung in die entsprechenden 10-substituiertendl-Methyl-2,3-seco-3-oxodeserpidate (IV) übergeführt. Die bei der Einwirkung von 3,4,5-Trimethoxybenzoylchlorid in Pyridin erhaltenen Ester V wurden weiter mit Phosphoroxychlorid cyclisiert und die Produkte als Perchlorate (VI) mit Zink in sauerer Lösung zu den entsprechenden 10-substituiertendl-Deserpidinen (VII, R=CH₃, OC₂H₅ bzw. SCH₃) reduziert. Mit Hilfe der Chromatographie gelang es in zwei Fällen, aus den Rohprodukten auch die entsprechendendl-3-Isodeserpidine (VIII, R=CH₃ bzw. OC₂H₅) zu isolieren. Zum Unterscheiden der Produkte der normalen Reihe (VII) und der 3-Iso-Reihe (VIII) wurden IR-Spektren und die Papierchromatographie angewendet.Mit 2 Abbildungen     

Analysis of the nonisothermal crystallization kinetics in three linear aromatic polyester systems

Melt or cold crystallization kinetics has a strong bearing on morphology and the extent of crystallization, which significantly affects the physical properties of polymeric materials. Nonisothermal crystallization kinetics are often analyzed by the classical Johnson–Mehl–Avrami–Kolmogorov (JMAK) model or one of its variants, even though they are based on an isothermal assumption. As a result, during the nonisothermal (e.g. constant heating or cooling rate) crystallization of polymeric material, different sets of model parameters are required to describe crystallization at different rates, thereby increasing the total number of model parameters. In addition, due to the uncorrelated nature of these model parameters with the cooling or heating rate, accurate modeling at any intermediate condition is not possible. In the present work, these two limitations of the conventional approach have been eliminated by exhibiting the existence of a functional relationship between cooling or heating rate and effective activation energy during nonisothermal melt or cold crystallization in three linear aromatic polyesters. Furthermore, it has been shown that when the JMAK model is used in conjunction with this functional relationship, it is possible to precisely predict the experimental nonisothermal melt or cold crystallization kinetics at any linear cooling or heating rate with a single set of model parameters.     

Origin of the stereo- and regioselectivities in the Diels-Alder reactions of azaphospholes: a DFT investigation

Computations of the Diels-Alder (DA) reactions of azaphosphole representative namely, thiazolo[3,2-d][1,4,2]diazaphosphole with 1,3-butadiene and isoprene at the density functional theory level reveal concerted mechanisms via asynchronous transition states. The activation energies (B3LYP/6-311++G**// B3LYP/6-311G**), 16-19 kcal mol⁻¹, are much smaller than the value (32.57 kcal mol⁻¹) calculated for the DA reaction of the non-phosphorus analogue, imidazo[2,1-b]thiazole with 1,3-butadiene. An electron-withdrawing group at the 3-position of the dienophile enhances both stereo- and regioselectivities, which agree nicely with the experimental values. Inclusion of solvent effect (PCM model) reveals that the stereo- and regioselectivities are not affected appreciably. The relative stabilities of the transition structures corresponding to the endo/exo stereoisomers and meta (P/Me, 1:3)/para (P/Me, 1:4) regioisomers have been rationalized on the basis of the secondary molecular orbital interactions.     

Synthesis of some new fluorine containing 3-dialkylaminomethyl indoles, 3-indolylglyoxamides and tryptamines

Several new 2-(fluoroaryl)-3-dialkylaminomethylindoles, 3-acetyl-2-(fluoroaryl)-indoles, 2-(fluoroaryl)-3-indolylglyoxamides and corresponding tryptamines have been prepared as possible psychopharmacological agents. 2-(Fluoroaryl)-indoles have been synthesized by theFischer indole synthesis. 2-(Fluoroaryl)-indoles on treatment with oxalyl chloride and subsequent reaction with amines, gave 2-(fluoroaryl)-3-indolylglyoxamides. Some of these indolylglyoxamides were reducted with lithium aluminium hydride, to the corresponding tryptamines. 2-(Fluoroaryl)-indoles when subjected toMannich reaction afforded 3-dialkylaminomethyl-2-(fluoroaryl)-indoles. All these new compounds have been characterized by IR spectral studies.Possible Psychopharmacological Agents, Part XII, Part XI, J. Indian. Chem. Soc.57, 423 (1980).     

Synthesis and anti-tumor activity of β-C-glycoside analogs of the immunostimulant KRN7000

A ring-closing metathesis approach was employed for the synthesis of a β-C-glycoside analog of the immunostimulant KRN7000. The protected C-glycosyl amino acid derivative 18 was converted to amino-olefin 20, and osmylation served to install the diol unit as a mixture of separable syn and anti isomers. Deprotection to the hydroxy-amine 21 was followed by N-acylation and debenzylation to deliver the target compound 5.     

Synthesis and electronic,magnetic and E.s.r. studies of some bimetallic alkoxides of copper(II) with niobium(V) and Tantalum(V)

Summary Novel bimetallic alkoxides of copper(II) of the type Cu[M(OPr-i)₆]₂ (M = Nb or Ta) have been synthesised by the interaction of CuCl₂ (1 mol) with K[M(OPr-i)₆] (2 mol). These bimetallic isopropoxides undergo facile alcohol interchange with primary alcohols such as MeOH, EtOH,n-PrOH andn-BuOH. However, witht-BuOH, the reaction cannot be driven to completion even under prolonged continuous azeotropic fractionation of the liberatedi-PrOH and the final product corresponded in analysis to Cu[Ta(OPr-i)₂(OBu-t)₄]₂.I.r., electronic and electron spin resonance spectral and magnetic susceptibility measurements indicate a distorted octahedralD _4h geometry for copper(II) in these bimetallic alkoxides.     

Kinetics of thermal degradation of poly(-caprolactone)

The thermal degradation/modification dynamics of poly(-caprolactone) (PCL) was investigated in a thermogravimetric analyzer under non-isothermal and isothermal conditions. The time evolution of the molecular weight distribution during degradation was studied using gel permeation chromatography. Experimental molecular weight evolution and weight loss profile were modeled using continuous distribution kinetics. The degradation exhibited distinctly different behavior under non-isothermal and isothermal heating. Under non-isothermal heating, the mass of the polymer remained constant at initial stages with rapid degradation at longer times. The Friedman and Chang methods of analysis showed a 3-fold change (from 18 to 55–62 kcal mol⁻¹) in the activation energy from low temperatures to high temperatures during degradation. This suggested the governing mechanism changes during degradation and was explained using two parallel mechanisms (random chain scission and specific chain end scission) without invoking the sequential reaction mechanisms. Under isothermal heating, the polymer degraded by pure unzipping of specific products from the chain end.