The effect of the thickness of the porous material on the parallel plate channel flow when the walls are provided with non-erodible porous lining

Flow through a channel whose walls are lined with non-erodible porous material is investigated using Beavers and Joseph slip boundary condition. It is shown that the effect of porous lining is to increase the mass flow rate and to decrease the friction factor.     

Experimental investigation on the flow instability behavior of a multi-channel boiling natural circulation loop at low-pressures

Natural circulation as a mode of heat removal is being considered as a prominent passive feature in the innovative nuclear reactor designs, particularly in boiling-water-reactors, due to its simplicity and economy. However, boiling natural circulation system poses many challenges to designer due to occurrence of various kinds of instabilities such as excursive instability, density wave oscillations, flow pattern transition instability, geysering and metastable states in parallel channels. This problem assumes greater significance particularly at low-pressures i.e. during startup, where there is great difference in the properties of two phases. In light of this, a parallel channel loop has been designed and installed that has a geometrical resemblance to the pressure-tube-type boiling-water-reactor, to investigate into the behavior of boiling natural circulation. The loop comprises of four identical parallel channels connected between two common plenums i.e. steam drum and header. The recirculation path is provided by a single downcomer connected between steam drum and header. Experiments have been conducted over a wide range of power and pressures (1–10 bar). Two distinct unstable zones are observed with respect to power i.e. corresponding to low power (Type-I) and high power (Type-II) with a stable zone at intermediate powers. The nature of oscillations in terms of their amplitude and frequency and their evolution for Type-I and Type-II instabilities are studied with respect to the effect of heater power and pressure. This paper discusses the evolution of unstable and stable behavior along with the nature of flow oscillation in the channels and the effect of pressure on it.     

Dynamical signatures of ‘phase transitions’: Chaos in finite clusters

Finite clusters of atoms or molecules, typically composed of about 50 particles (and often as few as 13 or even less) have proved to be useful prototypes of systems undergoing phase transitions. Analogues of the solid-liquid melting transition, surface melting, structural phase transitions and the glass transition have been observed in cluster systems. The methods of nonlinear dynamics can be applied to systems of this size, and these have helped elucidate the nature of the microscopic dynamics, which, as a function of internal energy (or ‘temperature’) can be in a solidlike, liquidlike, or even gaseous state. The Lyapunov exponents show a characteristic behaviour as a function of energy, and provide a reliable signature of the solid-liquid melting phase transition. The behaviour of such indices at other phase transitions has only partially been explored. These and related applications are reviewed in the present article.     

Einstein-Maxwell theory in 2+1 dimensions

Einstein-Maxwell theory in 2+1 dimensions is considered as a toy model for the 3+1 theory and as a means for understanding field theories without a background space-time geometry. Two possible approaches to the quantization of this theory are presented, one based on a Schwinger-Tomonaga time evolution equation and the other on a loop space construction, and the problems arising in both of these are discussed.     

Quantum computation using vortices and majorana zero modes of a px + ipy superfluid of fermionic cold atoms

We propose to use the recently predicted two-dimensional "weak-pairing" px + ipy superfluid state of fermionic cold atoms as a platform for topological quantum computation. In the core of a vortex, this state supports a zero-energy Majorana mode, which moves to finite energy in the corresponding topologically trivial "strong-pairing" state. By braiding vortices in the "weak-pairing" state, unitary quantum gates can be applied to the Hilbert space of Majorana zero modes. For readout of the topological qubits, we propose realistic schemes suitable for atomic superfluids.     

Preparation and Characterization of Chitosan Thin Films on Mixed-Matrix Membranes for Complete Removal of Chromium

Herein we present a new approach for the complete removal of Cr^VI species, through reduction of Cr^VI to Cr^III, followed by adsorption of Cr^III. Reduction of chromium from water is an important challenge, as Cr^IV is one of the most toxic substances emitted from industrial processes. Chitosan (CS) thin films were developed on plain polysulfone (PSf) and PSf/TiO₂ membrane substrates by a temperature-induced technique using polyvinyl alcohol as a binder. Structure property elucidation was carried out by X-ray diffraction, microscopy, spectroscopy, contact angle measurement, and water uptake studies. The increase in hydrophilicity followed the order: PSf < PSf/TiO₂ < PSf/TiO₂/CS membranes. Use of this thin-film composite membrane for chromium removal was investigated with regards to the effects of light and pH. The observations reveal 100 % reduction of Cr^VI to Cr^III through electrons and protons donated from OH and NH₂ groups of the CS layer; the reduced Cr^III species are adsorbed onto the CS layer via complexation to give chromium-free water.     

Serendipitous discovery of light-induced (<Emphasis Type="Italic">In Situ</Emphasis>) formation of an Azo-bridged dimeric sulfonated naphthol as a potent PTP1B inhibitor

Background

Protein tyrosine phosphatases (PTPs) like dual specificity phosphatase 5 (DUSP5) and protein tyrosine phosphatase 1B (PTP1B) are drug targets for diseases that include cancer, diabetes, and vascular disorders such as hemangiomas. The PTPs are also known to be notoriously difficult targets for designing inihibitors that become viable drug leads. Therefore, the pipeline for approved drugs in this class is minimal. Furthermore, drug screening for targets like PTPs often produce false positive and false negative results.

Results

Studies presented herein provide important insights into: (a) how to detect such artifacts, (b) the importance of compound re-synthesis and verification, and (c) how in situ chemical reactivity of compounds, when diagnosed and characterized, can actually lead to serendipitous discovery of valuable new lead molecules. Initial docking of compounds from the National Cancer Institute (NCI), followed by experimental testing in enzyme inhibition assays, identified an inhibitor of DUSP5. Subsequent control experiments revealed that this compound demonstrated time-dependent inhibition, and also a time-dependent change in color of the inhibitor that correlated with potency of inhibition. In addition, the compound activity varied depending on vendor source. We hypothesized, and then confirmed by synthesis of the compound, that the actual inhibitor of DUSP5 was a dimeric form of the original inhibitor compound, formed upon exposure to light and oxygen. This compound has an IC₅₀ of 36 μM for DUSP5, and is a competitive inhibitor. Testing against PTP1B, for selectivity, demonstrated the dimeric compound was actually a more potent inhibitor of PTP1B, with an IC₅₀ of 2.1 μM. The compound, an azo-bridged dimer of sulfonated naphthol rings, resembles previously reported PTP inhibitors, but with 18-fold selectivity for PTP1B versus DUSP5.

Conclusion

We report the identification of a potent PTP1B inhibitor that was initially identified in a screen for DUSP5, implying common mechanism of inhibitory action for these scaffolds.

     

A new chemical access for 3′-acetyl-4′-hydroxychalcones using borontrifluoride-etherate via a regioselective Claisen-Schmidt condensation and its application in the synthesis of chalcone hybrids

A new chemical access has been developed for the synthesis of 3′-acetyl-4′-hydroxychalcones from 1-(5-acetyl-2-hydroxy-phenyl)-ethanone and various substituted benzaldehydes via a regioselective Claisen-Schmidt condensation using borontrifluoride-etherate (BF₃·OEt₂) at room temperature, in good to excellent yields within 12-24 h. Application of this methodology has also been demonstrated in the synthesis of chalcone hybrids.