Low‐Temperature Facile Template Synthesis of Crystalline Inorganic Composite Hollow Spheres

This report presents a facile approach for the low‐temperature synthesis of crystalline inorganic‐oxide composite hollow spheres by employing the bulk controlled synthesis of inorganic‐oxide nanocrystals with polymer spheres as templates. The sulfonated polystyrene gel layer can adsorb the target precursor and induce inorganic nanocrystals to grow on the template in situ. The crystalline phase and morphology of the composite shell is tunable. By simply adjusting the acidity of the titania sol, crystalline titania composite hollow spheres with tunable crystalline phases of anatase, rutile, or a mixture of both were achieved. The approach is general and has been extended to synthesize the representative perovskite oxide (barium and strontium titanate) composite hollow spheres. The traditional thermal treatment for crystallite transformation is not required, thus intact shells can be guaranteed. The combination of oxide properties such as high refractive index, high dielectric constant, and catalytic ability with the cavity of the hollow spheres is promising for applications such as opacifiers, photonic crystals, high‐κ‐gate dielectrics, and photocatalysis.     

A chelating resin containing S, N and O atoms: Synthesis and adsorption properties for Hg(II)

A novel chelating resin containing S, N and O atoms (PSME-EDA) was synthesized by using poly(2-hydroxyethylmercaptomethylstyrene) (PSME) and diethanolamine (EDA) as materials. Its structure was characterized by elemental analysis, Fourier transform-infrared spectra (FTIR), scanning electron microscopy (SEM) and X-ray diffraction (XRD). The adsorption of the resin for Hg²⁺ was investigated. The saturated adsorption capacity of PSME-EDA for Hg²⁺ could reach to about 1.1 mmol/g at 25 °C when the initial Hg²⁺ concentration was 0.02 mol/l. Some factors affecting the adsorption such as temperature, reaction time and ion concentration were also studied. The results showed that adsorption was controlled by liquid film diffusion. The increasing of temperature was beneficial to adsorption. The Langmuir model was better than the Freundlich model to describe the isothermal process. The values of ΔG, ΔH, and ΔS calculated at 25 °C were −7.99 kJ mol⁻¹, 22.5 kJ mol⁻¹ and 34.4 J mol⁻¹ K⁻¹, respectively. The adsorption mechanism of PSME-EDA resin for Hg(II) was confirmed by X-ray photoelectron spectroscopy (XPS).     

Packing capilllary electrochromatography columns using vacuum--a preliminary study

This paper introducesa novel method for packing Capillary Electrochromatography Columns (CEC). Using vacuum packing methodology, silica particles as small as 1 microm were successfully packed into the capillary columns with 75 microm inner diameter. The columns are verystable and show no noticeable loss in efficiency after 200 sample injections. The performance of these vacuum packed capillary columns was evaluated with a mixture of aromatic and non-aromatic compounds. A 24 cm long capillary column can produce peak efficiencies of around 45,000 plates for benzene.     

Electrochemical studies of NiTMpyP and interaction with DNA

In this paper, cyclic voltammetry, linear sweep voltammetry and chronocoulometry in connection with the hang mercury drop electrode were used to study NiTMpyP and its mixture with DNA. The reduction of NiTMpyP in our experimental conditions involves in 4e reduction of TMpyP. NiTMpyP interacting with DNA forms electrochemically non-active complex DNA-2NiTMpyP, which can not be reduced on the Hg electrode. The peak potential of NiTMpyP does not shift and its electrochemical kinetic parameters indicate no significant change in the presence of DNA. However, the reduction current of NiTMpyP decreases obviously due to the formation of DNA-2NiTMpyP, which implies its equilibrium concentration decreases when DNA was mixed. The decrease of peak current is proportional to DNA concentration, which can be applied to estimate DNA concentration.     

Thermochemistry of rare earth complexes [Ln(Ala)2(Im)(H2O)](ClO4)3 (Ln=Pr, Gd)

The two complexes, [Ln(Ala)₂(Im)(H₂O)](ClO₄)₃ (Ln=Pr, Gd), were synthesized and characterized. Using a solution-reaction isoperibol calorimeter, standard enthalpies of reaction of two reactions: LnCl₃⋅6H₂O(s)+2Ala(s)+Im(s)+3NaClO₄(s)=[Ln(Ala)₂(Im)(H₂O)](ClO₄)₃(s)+3NaCl(s)+5H₂O(l) (Ln=Pr, Gd), at T=298.15 K, were determined to be (39.26±0.10) and (5.33±0.12) kJ mol^–1 , respectively. Standard enthalpies of formation of the two complexes at T=298.15 K, Δ_fH^Θ_m {[Ln(Ala)₂(Im)(H₂O)](ClO₄)₃(s)} (Ln=Pr, Gd), were calculated as –(2424.2±3.3) and –(2443.4±3.3) kJ mol^–1 , respectively.     

四苯硼酸盐的热化学研究——Ⅱ.一价四苯硼酸盐的标准生成焓

本文用自行建立的精密溶解层热装(?)测定了298.15K时,NH_4BPh_4、KBPH_4、RbBPh_4、CsBPh_4、TlBPh_4、AgBPh_4和HgPh_2七种沉淀反应的反应焓,由此计算了一价四苯硼酸盐的标准生成焓、熵及吉布斯自由能.     

铁电体爆-电换能的实验研究

使用掺铌PZT97.5/2.5铁电陶瓷样品在垂直工作模式下,进行了爆-电换能的实验研究。在电感-电容并联负载上获得了1360安的峰值电流;在电阻负载上获得了145×10³伏的峰值电压。实验结果与理论预计符合得比较好。 关键词：     

细胞呼吸爆发的微量量热学研究

The heat production of Wistar rat polymorphonuclear leukocytes (PMN) was measured by an LKB 2277 Thermal Activity Monitor. When PMN were activited with phorbol-12-myristate13-acetate (PMA), the respiratory burst was recorded by greatly incr eased heat production. Experiment was also carred out in the present of the inhibitor, Total Flavonoids of Lycium Barbarum L. (TFL). The respiratory burst heat production peak was disappeared, but the heat production curve was higher than that of PMA because TFL increased the metabolic activities of PMN.     

Synthesis and modification of terrylenediimides as high-performance fluorescent dyes

Two new synthetic approaches to terrylenediimides, highly photostable fluorescent dyes, are described. For the first time terrylenediimide has been synthesised in a straightforward procedure that makes large quantities available. The second route includes an efficient cross-coupling reaction followed by a cyclodehydrogenation. Monofunctionalisation of the imide structure allows terrylenediimides now to be coupled with a variety of compounds, for example, by Suzuki cross-coupling, which can lead to an array of terrylenediimides with new functional groups such as hydroxy, amino, or carboxy groups needed to link up with other molecules. The functionalisation in the bay region is used to tune the properties of terrylenediimides and extend the range of applications, for example, by introducing water solubility. These tetrasubstituted terrylenediimides offer, depending on the substituents used, exciting features such as good solubility in common organic solvents, water solubility, or NIR absorption.     

纤维素乙醇产业化

由于能发挥缓解能源紧张、减少环境污染、促进农村发展等重要作用,利用年产量巨大的植物纤维资源,生产可再生性液体替代燃料乙醇的技术受到了巨大的关注,成为工业生物技术的研究热点.酶法生产纤维素乙醇面临多种困难:纤维素原料比重轻,收集运输不便;原料结构复杂,需要深度预处理;纤维素酶系的酶解效率有待提高;半纤维素中的木糖难以发酵转化为乙醇等.经过多年研究,新技术已经取得重大进展,开始接近实用化.紧迫的社会需求正在迫使国内外政府和企业界大量投资,开展纤维素乙醇的中试研究和试生产,力求在短时期内克服上述难点,尽快实现产业化.充分利用植物纤维资源中的多种组分,联合生产乙醇和部分高值产品的生物精练技术,是实现纤维素乙醇产业化的重要突破口和必然途径.玉米芯生物精练生产乙醇和木糖相关产品的技术正在进行产业化.本文综述了纤维素乙醇产业化的研究进展并做了展望.