MEASUREMENTS OF CHAIN INTERPENETRATION OF POLYMER GLASSES

The concept of entanglement provides the basis of our current understanding of the flow behavior of polymer melts, Current techniques developed to investigate the degree of interpenetration of polymer chains only provide indirectly the information of the degree of entanglement in a relatively large scale （several to tens of nanometer）. In this article, we report ^1H-NMR spectroscopy with dipolar filters under fast magic angle spinning for probing chain interpenetration of polymer glasses at the molecular level.     

Comparison between ab Initio and Modified INDO-MO Calculations of N20

Both STO-3G ab initio and s-p separation-type-modified INDO semiempirical methods were applied to molecular-orbital calculation of the N₂₀ molecule. From these two methods, the optimized bond distances between the nearest N atoms (d_n-n) and the most calculated thermodynamic data are close to each other. The positive values of ΔH_a° and ΔG_a° for the atomization reaction in this work prove that N₂₀ is stable. In contrast to conventional INDO and MINDO/3, but similar to former AMI and MNDO calculations, both ΔH_r° and ΔG_r° are positive in the formation reaction, which indicates that N₂₀ belongs to the category of high-energy molecules.     

Chemically modified resins for solid-phase extraction

The packings most widely used for solid-phase extraction are hydrophobic and make poor surface contact with aqueous samples unless the resins are first treated with an activating organic solvent such as methanol. Insertion of an acetyl- or hydroxymethyl group into a porous polystyrene-divinylbenzene resin provides a more hydrophilic surface that is easily wetted by water alone. Small columns of the chemically modified resins were found to be very efficient for the solid-phase extraction of many types of organic solutes from aqueous samples. Comparative recovery studies showed that the modified resins are superior to both silica packings and unmodified organic resins for the solid-phase extraction of organic compounds, and especially for polar organics such as phenols.     

Oligomerization and Polymerization of Ethylene Initiated by a Novel Ni(Ⅱ)-Based Acetyliminopyridine Complexes as Single-Site Catalysts

Novel Ni(Ⅱ)-based acetyliminopyridine complexes 1b, 2b, 3b (1-3b), which are synthesized from ligands 1a, 2a, 3a (1-3a) and [NiCl2(DME)], are suitable precursors for the catalysts that are necessary for ethylene oligomerization and polymerization reactions, activated by methylaluminoxane (MAO). The MAO-treated 1-3b presents an active catalytic center, which may oligomerize and polymerize ethylene to produce linearα-olefins and polyethylene, respectively. The molecular weight distributions of oligomers that are obtained are in good agreement with the Schulz-Flory rules for oligomers>C4. The activity of 3b-MAO complex is 6.3×107 g/(molNi·h) at 50℃. The activities and molecular weight distributions of oligomers show significant reliance on the structures of catalyst precursors.     

Trace determination of arsenic species by capillary electrophoresis with direct UV detection using sensitivity enhancement by counter- or co-electroosmotic flow stacking and a high-sensitivity cell

Stacking techniques used independently and also with a high-sensitivity cell (HSC) were employed to optimise sensitivity and detection limits in the direct photometric detection of the following eight arsenic species by capillary zone electrophoresis (CZE): arsenite, arsenate, monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), 4-hydroxy-3-nitrophenylarsonic acid (Roxarsone), p-aminophenylarsonic acid (p-ASA), 4-nitrophenylarsonic acid (4-NPAA), and phenylarsonic acid (PAA) (target analytes). The stacking mechanisms, optimised stacking and separation conditions, and concentration sensitivity enhancement factors were discussed and compared for (i) normal stacking mode (NSM, sometimes also referred to as field-amplified stacking) in an uncoated fused-silica capillary in the counter-electroosmotic flow (EOF) mode, (ii) large-volume sample stacking (LVSS) with polarity switching, and (iii) the less often applied stacking method of co-EOF NSM stacking with EOF reversal using a poly(diallydimethylammonium chloride) (PDDAC)-coated capillary. The optimal injection volumes were 7.4, 60 and 17.2% of the total capillary volume, for the above three methods, respectively. LVSS with polarity switching gave the lowest limit of detection (LOD). The use of the HSC further reduced the LOD of each target analytes by a factor of 5-8 times. By combining LVSS and HSC, LODs of the target analytes could be reduced by a factor of 218-311, to 5.61, 9.15, 11.1, and 17.1 microg/L for As(III), DMA, MMA, and As(V), respectively. The method was demonstrated to be applicable to the determination of the target analytes in tap water and lake water, with recoveries in the range of 89.4-103.3%.     

Determination of bisphenol A in human breast milk by HPLC with column-switching and fluorescence detection

A highly sensitive HPLC method was developed for the determination of xenoestrogenic compound, bisphenol A (BPA) in human breast milk samples. After a two-step liquid-liquid extraction, BPA was derivatized with fluorescent labeling reagent, 4-(4,5-diphenyl-1H-imidazol-2-yl)benzoyl chloride (DIB-Cl). The excess fluorescent reagent could be removed effectively using a column-switching system. The separation of DIB-BPA from endogenous materials in milk was carried out on two C(18) columns and fluorescence intensity was monitored at 475 nm with the excitation of 350 nm. A good linearity (r = 0.994) was observed of BPA in the concentration range of 0.2-5.0 ng mL(-1) in breast milk, and the detection limit was 0.11 ng mL(-1) at a signal-to-noise ratio of 3. Intra- and inter-day precision (RSD, %) were less than 8.7 and 10.4, respectively. Twenty-three breast milk samples of healthy lactating women were analyzed for the BPA concentration; the mean value was 0.61 +/- 0.20 ng mL(-1), with no correlation to the lipid content of milk samples.     

利用流变仪测定聚苯乙烯的分子量和分子量分布的研究

用先进流变扩展系统ARES（Advanced Rheology Expanded System）对聚苯乙烯的分子量和分子量分布进行了测定，并且将所得的结果与GPC的结果进行了比较，发现误差非常小．因此认为用ARES进行特定聚合物的分子量及分子量分布测定，是一种快速、准确的测定方法，对生产的质量控制有一定的帮助．     

N-烷基壳聚糖玻璃化转变温度的研究

采用差示扫描量热(DSC)法和热释电流(TSC)法研究了N-烷基壳聚糖的玻璃化转变行为. DSC法中采用二次扫描以消除溶剂和热历史的影响, 并利用物理老化方法来增强N-烷基壳聚糖在DSC曲线上的玻璃化转变区域的热焓吸热峰, 以克服DSC法的不灵敏性. 两种研究方法的结果一致表明, 三种N-烷基壳聚糖的玻璃化转变均发生在110～150 ℃温区内；取代的柔性烷基越大, 玻璃化转变温度(Tg)越低；但N-甲基壳聚糖例外, 其Tg略高于壳聚糖, 空间阻碍在这里起决定的作用.     

ATISINE型二萜生物碱的圆二色谱(CD)

C_(20)-二萜生物碱结构复杂,环上大多有含氧的基团。利用NMR、MS等确定羟基、羰基在分子中的位置往往不够有力。特別是对于C_1~3或C_(11)位上羰基,没有可靠而简便的光谱鉴別方法。我们通过对几个Atisine型含羰基化合物的圆二色谱研究发现,由CD谱确定羰基在C_6位、C_(11)位及C_(13)位是一种简便有效的方法。     

Co-C bond dissociation energy and reaction volume change of 2',5'-dideoxyadenosylcobalamin studied by laser-induced time-resolved photoacoustic calorimetry

Time resolved photoacoustic calorimetry (PAC) was applied to a study of the photolysis of a coenzyme B(12) analog 2',5'-dideoxyadenosylcobalamin, which lacks an -OH group at the 2' position of ribofuranose ring. In aqueous solution, we report for the first time the quantum yield Phi(d) (0.25+/-0.02), Co-C bond dissociation energy (BDE; 31.8+/-2.5 kcal mol(-1)) and reaction volume change deltaV(R) (6.5+/-0.5 ml mol(-1)) due to conformation changes of the corrin ring and its side chains accompanying the cleavage of the Co-C bond. These values for the analog are very similar to those for the natural cofactor. Based our results and previous studies, a possible explanation for the similarity in their structure and properties versus the large difference in their enzymatic activity is discussed.