基因芯片荧光图象采集与分析

描述了基因芯片荧光图象的光学共聚焦成象,大范围高速扫描与控制,数据采集的原理和方法.并讨论了基因芯片荧光图象的分析算法,即模板定位与阈值分割相结合的半自动算法,并将其计算结果与完全采用人工分割算法的结果进行了比较.     

差分吸收光谱法测量大气痕量气体浓度误差分析及改善方法

差分吸收光谱技术(DOAS)中采用线性最小二乘拟合方法,用痕量气体标准差分吸收截面对测量得到的差分吸收光谱进行拟合,得出大气中痕量气体的浓度.计算结果的准确性不仅取决于光谱的测量精度,而且受标准差分吸收截面以及仪器函数和温度等诸多因素的影响.详细地分析了计算误差的产生原因,提出了用高浓度样品池得到标准吸收截面的方法,针对光谱固有结构,以及温度对标准吸收截面的影响,改进了浓度反演算法.大量的实验表明,综合运用上述方法,即便对低浓度的样气,相对测量误差也能降低到10%以下.     

稀土甘氨酸咪唑配合物[RE(Gly)4(Im)(H2O)](ClO4)3的热化学研究

采用溶解-反应量热法在具有恒温环境的溶解-反应热量计内,测定了[Gd(Gly)4(Im)(H2O)](ClO4)3和[Y(Gly)4(Im)(H2O)](ClO4)3两种稀土甘氨酸咪唑配合物的标准生成焓分别为(-3 461.46 ±0.22) kJ·mol-1 和(-3 926.6±0.90) kJ·mol-1.     

Laser-induced damage of Ta2O5/SiO2 narrow-band interference filters under different 1064 nm Nd:YAG laser modes

The laser-induced damage (LID) behavior of narrow-band interference filters was investigated with a Nd:YAG laser at 1064 nm under single-pulse mode and free-running mode. The absorption measurement of such coatings was performed with surface thermal lensing (STL) technique. The damage morphologies under the two different laser modes were also studied in detail. It was found that all the filters exhibited a pass-band-center-dependent absorption and laser-induced damage threshold (LIDT) behavior, but the damage morphologies were diverse. The explanation was given with the analysis of the electric field distribution and the operational behavior of the irradiation laser.     

Investigation of the Property Constants of Both Al and Cu Complexes with Picramine Ca and Using Competition Coordination for the Selective Determination of Trace Amounts of Cu

The reactions between Cu(II) and picramine CA (PCA) and Al(III) and PCA were both sensitive at pH 7. The competition coordination between Cu and the Al–PCA complex was applied to the selective determination of Cu (CCSD) by the spectral correction technique. Results have shown that the complexes formed at pH 7 are Al₂(PCA) and Cu(PCA)₃, their cumulative stability constants are 4.43 × 10⁵ and 2.08 × 10¹⁵, respectively, and their real molar absorptivities are 5.78 × 10³ at 650 nm and 3.19 × 10⁴at 530 nm. At the analysis of the samples, the relative standard deviation (RSD) was 5.0% and the recovery rate of Cu was between 94 and 108%.     

Deposition of Hydrogen-Free Silicon Nitride Thin Films by Microwave ECR plasma Enhanced Magnetron Sputtering at Room Temperature

Hydrogen-free silicon nitride （SiNx） films were deposited at room temperature by microwave electron cyclotron resonance （MW-ECR） plasma enhanced unbalance magnetron sputtering system. Both Fourier-transform infrared spectroscopy and x-ray photoelectron spectroscopy are used to study the bonding type and the change of bonding structures of the silicon nitride films. The results indicate that the chemical structure and composition of SiNx films deposited by this technique depend strongly on the N2 flow rates, the stoichiometric SiNx film, which has the highest hardness of 22.9 GPa, could be obtained at lower N2 flow rate of 4 sccm.     

Crystallographic report: Bis{[diacetyl‐bis(2,6‐isopropylphenylimine)]nickel(I)(µ‐chloro)}

The first α‐diimine nickel(I) complex having a chloro bridge is reported. The centrosymmetric dinuclear structure of {[ArN?C(Me)C(Me)?NAr]NiCl}₂[Ar?2,6?C₆H₃(i‐Pr)₂] features two chelating α‐diimine ligands and two bridged chlorine atoms, so that a distorted tetrahedral N₂Cl₂ coordination geometry for nickel results. Copyright © 2004 John Wiley & Sons, Ltd.     

安培

安培(1775-1836)，法国物理学家，对数学和化学也有贡献．1775年1月22日生于里昂一个富商家庭．少年时就显出数学才能．他的父亲信奉卢梭的教育思想，供给他大量图书，令其走自学道路，于是他博览群书，吸取营养．卢梭关于植物学的著作燃起他对科学的热情，1802年他在布尔让——布雷斯中央学校任物理学和化学教授；1814年被选为帝国学院教学部成员；1819年主持巴黎大学哲学讲座；1824年担任法兰西学院实验物理学教授．1836年6月10日在巡视法国各大学途经马赛时逝世．终年61岁．     

A New Cycloartane from Sphaerophysa salsula

A novel cycloartane,named sphaerophysone A,9,19-cycloart-7β,24β,25-triol-1-en-3-one,was isolated from the ethanol extract of Sphaerophysa salsula DC.The structure was elucidated on the basis of spectral evidences and confirmed by X-ray analysis,the stereochemistry of the compound was also defined by X-ray analysis.     

3,7-二硝基亚氨基-2,4-二氮杂双环[3,3,0]辛烷的放热分解反应动力学

在程序升温条件下 ,用DSC研究了标题化合物的放热分解反应动力学 .用线性最小二乘法、迭代法以及二分法与最小二乘法相结合的方法 ,以积分方程、微分方程和放热速率方程拟合DSC数据 .在逻辑选择建立了微分和积分机理函数的最可几一般表达式后 ,用放热速率方程得到相应的表观活化能 (Ea)、指前因子 (A)和反应级数 (n)的值 .结果表明 :该反应的微分形式的经验动力学模式函数、Ea 和A值分别为 (1-α) 0 .44、2 30 .4kJ/mol和 10 18.16s-1.借助加热速率和所得动力学参数值 ,提出了标题化合物放热分解反应的动力学方程 .该化合物的热爆炸临界温度为 30 2 .6℃ .上述动力学参数对分析、评价标题化合物的稳定性和热变化规律十分有用 .