On-line sorbent extraction, preconcentration and determination of lead by atomic absorption spectrometry

A method for the quantitative preconcentration of lead based on an existing batch process was developed for implementation in a flow system including a flame AAS detector. Lead can be quantitatively preconcentrated as pyrrolidinedithiocarbamate or dithizonate on an activated carbon minicolumn. The chelates are eluted in methyl isobutyl ketone and introduced directly into the nebuliser-burner. An enrichment factor of 50 is typically obtained for a preconcentration time of 2 min (lead can be determined at concentrations between 15 and 400 ng/ml), which results in a throughput of ca. 25 samples per hr. The sensitivity achieved with the two reagents is similar, but the selectivity provided by APDC exceeds that of dithizone. Based on the results obtained in the determination of lead in reference materials (minerals and skim milk), the proposed APDC method is applicable to real samples.     

Zur Kenntnis der thermischen Zersetzung von Ammoniumhexafluoroscandat,-titanat,-vanadat und-chromat

Thermal analysis supported by kinetic calculations was applied exhaustively to these compounds. Under dynamic conditions, tetrafluorometallates(III), which as intermediates, could not be isolated, for the first three compounds. In each case, the final step was the pure metal(III) fluoride. Ammonium hexafluorochromate(III) decomposed directly to the pure chromium(III) fluoride. The decomposition rate of all compounds slowed down towards the end, probably for kinetic reasons. Polymorphic transitions of ammonium hexafluorotitanate(III) were observed at 35 and 100°C. Ammoniumhexafluoroscandate(III) underwent polymorphic transition at 47°C. The decomposition patterns for all these compounds were similar. Conditions for the preparation of pure ammonium tetrafluorometallates(III) of Sc, Ti and V are described.     

Reconocimiento de nicotina en una hebrita de tabaco

Summary Adaption of theLuís method for the detection of nicotine to microscale, usingEmich's capillary technic proved successful, attaining identification limit of 0,03g.Applying a sub-micro steam distillation effect, the nicotine in a speck of tobacco (1 mm² and less) could still be detected by using the above reaction.Extension of the above procedure to mixtures of nicotine with substances not volatile with steam, inorganic (halides) as well as organic compounds (other alkaloids, acids, etc.) proved to be successful, even when the nicotine is present in proportions of only 1 part in 1000.

---

Zusammenfassung Die Anwendung der Kapillartechnik vonEmich zum Nachweis von Nikotin nachLuís war erfolgreich und zeigte eine Erfassungsgrenze von 0,03g.Bei Anwendung einer Ultramikrodampfdestillation kann das Nikotin nach obiger Methode noch in Spuren von Tabak (1 mm² und weniger) nachgewiesen werden.Die Reaktion ist auch positiv bei Gemischen von Nikotin mit anderen, mit Wasserdampf nicht flüchtigen sowohl anorganischen (Halogenide) als auch organischen Substanzen (andere Alkaloide, Säuren etc.), selbst dann noch, wenn das Nikotin bloß im Verhältnis von 11000 vorhanden ist.

---

Résumé La technique capillaire d'Emich a été utilisée avec succès pour identifier la nicotine suivant le procédé deLuís; la limite de sensibilité est alors de 0,03g. La mise en oeuvre d'un ultramicroentraînement à la vapeur permet en outre, par application de la précédente méthode, d'identifier la nicotine dans des traces de tabac (moins de 1 mm²). La réaction est également positive en présence d'autres substances non entraînables par la vapeur d'eau, qu'elles soient minérales (halogénures) ou organiques (autres alcaloïdes, acides, etc. ...) même si la proportion de nicotine n'est que de l'ordre de grandeur de 1/1000.

     

Excess molar enthalpy of binary mixtures of hexane+ethyl benzene, <Emphasis Type="Italic">o</Emphasis>-xylene, <Emphasis Type="Italic">m</Emphasis>-xylene and <Emphasis Type="Italic">p</Emphasis>-xylene at 298.15 K

Summary This paper reports excess molar enthalpies of the binary systems hexane+ethyl benzene, hexane+o-xylene, hexane+m-xylene and hexane+p-xylene at 298.15 K and atmospheric pressure, over the whole composition range. The data was measured directly using a Calvet microcalorimeter. The excess magnitude was correlated to a Redlich-Kister type equation for each mixture. Also, we will discuss the results for the four mixtures studied here and by comparison with the same binary systems but containing propyl propanoate as first component. Finally, we will correlate our results with the Nitta-Chao and the three UNIFAC theoretical approximations.     

Discontinuous-flow potentiometric determination of chloride in a large-volume wall-jet cell using an ion-selective electrode based on a silver chloride film chemically deposited on a silver iodide support

A robust and sensitive chloride ion-selective electrode can be prepared by modifying the surface of an iodide-selective electrode using the chemical reaction with mercuric chloride in an oxidizing medium containing excess chloride. A thin film of silver chloride is thus formed ensuring a rapid and reproducible response to chloride. The analytical parameters of this electrode are similar to those of commercial silver chloride ion-selective electrodes, but its electrical impedance and signal noise are substantially lower and the response somewhat faster. Its sensitivity toward surfactants is somewhat suppressed. The electrode was used for discontinuous flow potentiometric (DFP) determinations in a large-volume wall-jet cell in which the electrode surface can be continuously reactivated by a cleaning solution contained in the cell. The method was applied to determination of chloride in ground waters from an industrial waste dumping site. The limit of determination is low 9 mug Cl(-)/l (2.6 x 10(-7)M), the precision good (the relative standard deviation varies from 0.6 to 3.0% for chloride contents from 2.90 to 0.15 mg/l, respectively) and the method correlates satisfactorily with the results of an indirect AAS determination of chloride. The sample throughput is high-90 measurements can be carried out per hour, corresponding to 30-40 determinations per hour.     

Untersuchungen zur 3-Phononenabsorption in partiell kristallinen Polymeren

Zusammenfassung In dieser Arbeit wird die Dreiphononenabsorption in Polymeren, die den Hauptanteil an den dielektrischen Verlusten im Millimeterwellengebiet stellt, theoretisch und experimentell untersucht. Aus der Störungsrechnung bis zur 2. Ordnung wird die Temperaturabhängigkeit der Absorption abgeschätzt. Damit ist eine befriedigende Deutung des gesamten Temperaturverlaufs der dielektrischen Verlust-Kurven möglich. Im Hochtemperaturbereich läßt sich die Mehrphononenabsorption eindeutig gegenüber restlichen Relaxationsprozessen abgrenzen. Im Tieftemperaturgebiet konnte erstmals auch für das Millimeterwellengebiet ein temperaturunabhängiger Bestandteil fehlordnungsinduzierter Einphononenabsorption nachgewiesen werden. Im Übergangsbereich durchlaufen die Absorptionskurven einen Wendepunkt bei einer charakteristischen TemperaturT ₀, die dem Schwerpunkt der am Absorptionsprozeß beteiligten Phononenfrequenzen entspricht. Daraus konnten in Übereinstimmung mit dem Experiment die Frequenzen der niedrigsten optisch aktiven Phononen für die verschiedenen Polymeren abgeschätzt werden.

---

Summary The 3-phonon absorption in polymers, which gives the main contribution to their dielectric loss in the microwave region, is theoretically and experimentally investigated. Perturbation theory up to the second order is used for the evaluation of its temperature dependence. The theoretical results allow an interpretation of the total absorption-temperature-curves: In the high temperature region 3-phonon absorption can be distinguished from residual relaxation losses (above the glass temperature). In the low temperature region the existence of a low frequency tail of temperature independent disorderinduced one-phonon absorption became evident. At intermediate temperatures (50–150°K) the curves show an inflexion point or plateau at a characteristic temperatureT ₀, which according toT ₀= ⁰, corresponds to the frequencies of those phonons, that mainly contribute to the multiphonon absorption. The plateau gives, in good agreement with the experiment, the frequencies of the lowest optically active phonons in the various polymers.

---

---

Mit 6 Abbildungen in 8 Einzeldarstellungen

---

Vorgetragen auf der Arbeitssitzung des Fachausschusses Physik der Hochpolymeren in der Frühjahrstagung 1970 des Regionalverbandes Hessen-Mittelrhein-Saar der Deutschen Physikalischen Gesellschaft in Darmstadt, 10.–13. März 1970.     

Structure des savons alcalins

Summary This is a systematic X-ray diffraction study of the structure of the mesomorphic phases occurring with potassium soaps ranging from C₈ to C₂₂.Four types of structure have been identified. The first is lamellar with both polar groups and paraffin chains in the crystalline state. The second is also lamellar, but with both polar groups and paraffin chains in the liquid state. The third corresponds to the localization of indefinitely long ribbons on a two-dimensional oblique lattice; polar groups are crystalline and paraffin chains desorganized. The fourth corresponds to the localization of discs on a three-dimensionnalB-faces centered orthorhombic lattice; polar groups are crystalline and paraffin chains disorganized.The structural parameters and the polymorphism of the polar groups have been discussed.

---

Zusammenfassung Wir beschreiben hier eine systematische Röntgenstrahlendiffraktionsforschung der Struktur der mesomorphen Phasen von Kalium Seifen von C₈ bis C₂₂.Vier Strukturtypen wurden gefunden. Die erste Struktur ist lamellar; beides, die polaren Gruppen und die Paraffinketten sind kristallisiert. Die zweite Struktur ist auch lamellar; aber in diesem Falle sind beides, die polaren Gruppen und Paraffinketten geschmolzen. Die dritte Struktur entspricht einer Lokalisation von Seifenbändern in einem zweidimensionalen monoklinen Gitter; die polaren Gruppen sind kristallisiert und die Paraffinketten geschmolzen. Die vierte Struktur entspricht einer Lokalisation von Seifenscheiben in einemB-flächenzentrierten orthorhombischen Raumgitter; die Polargruppen sind kristallisiert und die Paraffinketten geschmolzen.Wir haben aus den experimentellen Resultaten einige Schlußfolgerungen gezogen.

     

Dampfdruck- und Leitfähigkeitsuntersuchungen der Ionensolvatation in Amiden

The solvating properties of formamide, N-methylformamide, dimethylformamide, N-ethylformamide and diethylformamide have been investigated by means of vapour pressure and conductivity measurements. For the salts and ions, resp. average solvation numbers have been calculated from vapour pressure data and limiting ionic conductances. The solvation numbers are used for a discussion of the influence of N-substituents on the solvating properties of the amides.

---

---

Mit 2 Abbildungen     

Qualitative and quantitative sensitivity in flame photometry

Concepts of sensitivity in flame photometry are discussed. A distinction is made between sensitivity itself, concentration limits and dilution limits applied to qualitative and quantitative analysis by flame photometry. Sensitivity values, as well as the concentration limits, are considered from two different aspects: as a function of the slope of calibration curves-percentual values-and as a function of fluctutions-fluctuational values. The concepts are applied to the two main branches of flame photometry, emission and absorption.