Effect of iron doping concentration on magnetic properties of ZnO nanoparticles

The ZnO:Fe nanoparticles of mean size 3-10 nm were synthesized at room temperature by simple co-precipitation method. The crystallite structure, morphology and size estimation were performed by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM). The wurtzite structure of ZnO gradually degrades with the increasing Fe doping concentration. The magnetic behavior of the nanoparticles of ZnO with varying Fe doping concentration was investigated using a vibrating sample magnetometer (VSM). Initially these nanoparticles showed strong ferromagnetic behavior, however at higher doping percentage of Fe, the ferromagnetic behavior was suppressed and paramagnetic nature was observed. The enhanced antiferromagnetic interaction between neighboring Fe-Fe ions suppressed the ferromagnetism at higher doping concentrations of Fe. Room-temperature Mössbauer spectroscopy investigation showed Fe³⁺ nature of the iron atom in ZnO matrix.     

Probing photochemical transformations at TiO2Pt and TiO2Ir interfaces using x-ray absorption spectroscopy

Structural transformations at the TiO2Pt and TiO2Ir interfaces during UV-irradiation have been probed by X-ray absorption spectroscopy. Oxidation by the photogenerated holes results in the intercalation of Pt and Ir into the Titania matrix. The structural transformations observed with Pt and Ir nanoparticles anchored on TiO2 is different than the clustering of gold atoms observed in the TiO2/Au system. Implications of such structural transformations on the photocatalytic activity of semiconductor photocatalyts are discussed.     

Single-wall carbon nanotubes supported platinum nanoparticles with improved electrocatalytic activity for oxygen reduction reaction

Significant enhancement in the electrocatalytic activity of Pt particles toward oxygen reduction reaction (ORR) has been achieved by depositing them on a single wall carbon nanotubes (SWCNT) support. Compared to a commercial Pt/carbon black catalyst, Pt/SWCNT films cast on a rotating disk electrode exhibit a lower onset potential and a higher electron-transfer rate constant for oxygen reduction. Improved stability of the SWCNT support is also confirmed from the minimal change in the oxygen reduction current during repeated cycling over a period of 36 h. These studies open up ways to utilize SWCNT/Pt electrocatalyst as a cathode in the proton-exchange-membrane-based hydrogen and methanol fuel cells.     

Screening of domperidone in wastewater by high performance liquid chromatography and solid phase extraction methods

Domperidone is a dopamine D₂ receptor antogonist, which has been used as antiemetic agent in human beings. It has been found in wastewater released by some pharmaceutical industries leading to the contamination of surface and ground water. Therefore, a sensitive, inexpensive and reproducible HPLC-SPE method was developed for the analysis of domperidone in the wastewater. The column used was Waters symmetry C₁₈ (15 cm × 0.46 mm, 5 μm). The mobile phase used was phosphate buffer (50 mM, pH 3.5) acetonitrile (80:20, v/v) at the flow rate 2.0 mL/min. The detection was achieved by using UV mode at 230 nm. The retention, separation and resolution factors were 2.63, 3.00 and 3.20, respectively. The percentage recovery of domperidone from wastewater was 95.0%. Celiprolol was used as the internal standard to access the percentage extraction of domperidone from wastewater.     

Optical Emission Spectroscopy of Carbon Clusters Produced in a Hollow Cathode Sputter Source

A hollow cathode sputter source is developed to trace the production of carbon clusters and study the influence of discharge current and argon gas pressure on cluster production using an optical emission spectroscopic technique. Optical emission spectra from the hollow cathode source reveal the production of the C₂ Swan band. The sputter source is optimized for the maximum carbon cluster yield. The vibrational temperature analysis of the C₂ cluster is carried out using the Boltzmann plot method. The dependence of vibrational temperature on argon gas pressure is discussed and the dominant method for C-C association in the glow discharge is suggested.     

Micro-structural Impact of Different Strut Shapes and Porosity on Hydraulic Properties of Kelvin-Like Metal Foams

Various ideal periodic isotropic structures of foams (tetrakaidecahedron) with constant ligament cross section are studied. Different strut shapes namely circular, square, diamond, hexagon, star, and their various orientations are modeled using CAD. We performed direct numerical simulations at pore scale, solving Navier–Stokes equation in the fluid space to obtain various flow properties namely permeability and inertia coefficient for all shapes in the porosity range, \(0.60<\varepsilon <0.95\) for wide range of Reynolds numbers, \(10^{-6} . We proposed an analytical model to obtain pressure drop in metallic foams in order to correlate the resulting macroscopic pressure and velocity gradients with the Ergun-like approach. The analytical results are fully compared with the available numerical data, and an excellent agreement is observed.     

Ionic liquid catalyzed synthesis of 7-phenyl-1,4,6,7-tetrahydro-thiazolo[5,4-d]pyrimidine-2,5-diones

A simple, green and catalyst free one pot synthesis of 7-phenyl-1,4,6,7-tetrahydro-thiazolo[5,4-d]pyrimidine-2,5-diones via a multicomponent reaction between thiazolidine-2, 4-dione (TZD), aromatic aldehyde and urea analogues is described. The ionic liquid has been used as a solvent as well as catalyst for this reaction. This reaction proceeded smoothly in good to excellent yields and offered several other advantages including short reaction time, simple experimental workup procedure and no by-products.     

Fortification of CdSe quantum dots with graphene oxide. Excited state interactions and light energy conversion

Graphene based 2-D carbon nanostructures provide new opportunities to fortify semiconductor based light harvesting assemblies. Electron and energy transfer rates from photoexcited CdSe colloidal quantum dots (QDs) to graphene oxide (GO) and reduced graphene oxide (RGO) were isolated by analysis of excited state deactivation lifetimes as a function of degree of oxidation and charging in (R)GO. Apparent rate constants for energy and electron transfer determined for CdSe-GO composites were 5.5 × 10(8) and 6.7 × 10(8) s(-1), respectively. Additionally, incorporation of GO in colloidal CdSe QD films deposited on conducting glass electrodes was found to enhance the charge separation and electron conduction through the QD film, thus allowing three-dimensional sensitization. Photoanodes assembled from CdSe-graphene composites in quantum dot sensitized solar cells display improved photocurrent response (~150%) over those prepared without GO.     

On the role of the three-phase contact line in surface deformation

Viscoelastic braking theories developed by Shanahan and de Gennes and by others predict deformation of a solid surface at the solid-liquid-air contact line. This phenomenon has only been observed for soft smooth surfaces and results in a protrusion of the solid surface at the three-phase contact line, in agreement with the theoretical predictions. Despite the large (enough to break chemical bonds) forces associated with it, this deformation was not confirmed experimentally for hard surfaces, especially for hydrophobic ones. In this study we use superhydrophobic surfaces composed of an array of silicon nanostructures whose Young modulus is 4 orders of magnitude higher than that of surfaces in earlier recorded viscoelastic braking experiments. We distinguish between two cases: when a water drop forms an adhesive contact, albeit small, with the apparent contact angle θ < 180° and when the drop-surface adhesion is such that the conditions for placing a resting drop on the surface cannot be reached (i.e., θ = 180°). In the first case we show that there is a surface deformation at the three-phase contact line which is associated with a reduction in the hydrophobicity of the surface. For the second case, however, there cannot be a three-phase contact line associated with a drop in contact with the surface, and indeed, if we force-place a drop on the surface by holding it with a needle, no deformation is detected, nor is there a reduction in the hydrophobic properties of the surface. Yet, if we create a long horizontal three-phase contact line by partially immersing the superhydrophobic substrate in a water bath, we see a localized reduction in the hydrophobic properties of the surface in the region where the three-phase contact line used to be. The SEM scan of that region shows a narrow horizontal stripe where the nanorods are no longer there, and instead there is only a shallow structure that is lower than the nanorods height and resembles fused or removed nanorods. Away from that region, either on the part of the surface which was exposed to bulk water or the part which was exposed to air, no change in the hydrophobic properties of the surface is observed, and the SEM scan confirms that the nanorods seem intact in both regions.     

Influence of dipole-dipole interactions on coverage-dependent adsorption: CO and NO on Pt(111)

Density functional theory (DFT) calculations of energetic, geometric, vibrational, and electrostatic properties of different arrangements of CO and NO at quarter and half monolayer coverage on Pt(111) are presented. Differences in the extents of electron back-donation from the Pt surface to these molecules cause the low-coverage adsorbate dipoles to have opposite signs at atop and more highly coordinated bridge or fcc sites. These dipoles of opposite sign occupy adjacent positions in the experimentally observed atop-bridge or atop-fcc high -coverage arrangements, leading to attractive electrostatic interactions and concomitant changes in dipole moments, bond lengths, and vibrational frequencies. The interaction energies are estimated by charge partitioning to extract individual dipoles from the mixed arrangement and by calculations of field-dipole interactions. These estimated dipole interactions contribute significantly (20-60%) to the DFT-calculated relative stability of mixed arrangements over atop-, bridge-, or fcc-only arrangements and thus play an important role in coverage-dependent adsorption. We further extend these analyses to a range of molecules with varying dipole moments and show that the general nature of these interactions is not limited to CO and NO.