Silver based mercury film electrode: Part IV. Comparison of theoretical and experimental voltammetric results obtained for cadmium

Using the silver based mercury film electrode (SBMFE) and cyclic and stripping voltammetric techniques the behaviour of cadmium has been compared with the behaviour of lead as well as with the predictions of the theory of de Vries and van Dalen. At the SBMFE with film thickness between 0.1 and 2 μm lead behaves with good agreement with theoretical predictions and only at thicknesses higher than 2 μm some deviations occur due to collecting of the excess mercury at the bottom of the wire electrode. On the other hand even at thin film electrodes the behaviour of cadmium deviates significantly from the predictions of the theory. The height of the anodic peak decreases and its width increases; also the displacement of the potentials of both cathodic and anodic peaks is smaller than the values predicted theoretically. The deviations are caused neither by the formation of intermetallic compounds in the bulk of mercury phase nor by the formation of heterogenous cadmium amalgam; they reflect the interaction between cadmium dissolved in mercury and the solid silver amalgam which is the substrate of the mercury film. Owing to the effect discussed the stripping determination of cadmium at SBMFE is characterized by a lower sensitivity and reproducibility.     

Dehydrogenation of ethylbenzene with nitrous oxide in the presence of mesoporous silica materials modified with transition metal oxides

The novel mesoporous templated silicas (MCM-48, SBA-15, MCF, and MSU) were used as supports for transition metal (Cu, Cr, or Fe) oxides. The catalysts were synthesized using the incipient wetness impregnation, and characterized by low-temperature N2 sorption, DRIFT, photoacoustic IR spectroscopy, UV-vis diffuse reflectance spectroscopy, and temperature-programmed desorption of ammonia. It was shown that the preparation method used results in different distributions and dimensions of the transition metal oxide clusters on the inert support surface. The prepared catalysts were tested in the reaction of oxidative dehydrogenation of ethylbenzene in the presence of nitrous oxide. The iron-containing catalysts showed the highest catalytic activity. The presence of isolated Fe3+ was found to be the most important factor influencing the ethylbenzene conversion. The undesirable effect of the increase in selectivity toward CO2 was observed for the samples with the highest concentrations of acidic surface sites.     

Thermal decomposition of surface compounds for the generation of small quantities of acetaldehyde: Calibration of a thermal desorption-gas chromatography-flame ionization detection

The paper presents a new method for the generation of acetaldehyde in the amounts that allow to calibrate the measuring system. The method is based on thermal decomposition of surface compounds at the range 130-190 °C, in which an acetaldehyde as the decomposition product is released. The synthetic pathway leading to the desired surface compounds is described. Investigations demonstrated that the synthesis of the compounds on the surface of the support material (silica gel) was carried out homogeneously. The technique proposed was used for the generation of gaseous standard mixtures containing acetaldehyde for the calibration of a thermal desorber-gas chromatograph-flame ionization detector system.     

Chemoenzymatic synthesis of phosphocarnitine enantiomers

Racemic phosphocarnitine 3 has been synthesized starting from diethyl 3-chloro-2-oxopropanephosphonate 4 in three steps involving reduction of 4 to the corresponding 2-hydroxyphosphonate 5, conversion of the latter to phosphonic acid 6, and final reaction with trimethylamine, affording the trimethylammonium salt of 3. Baker's yeast reduction of 4 and enzymatic kinetic resolution of (+/-)-5 afforded the enantiomerically pure precursors of phosphocarnitine, (R)-(+)-5 and (S)-(-)-5, which were converted to (S)-(-)- and (R)-(+)-phosphocarnitine 3, respectively.     

Enantioselective allylation of alkyl glyoxylates catalyzed by (salen)chromium(III) complexes

The enantioselective addition of allylstannanes and allylsilanes to alkyl glyoxylates of type 1, catalyzed by chiral (salen)Cr(III) complexes 3, has been studied. We have found that the reaction proceeded smoothly for low loading (1-2 mol %) of (1R,2R)-(salen)Cr(III)BF₄3a or (1R,2R)-(salen)Cr(III)ClO₄3c, and allyltributyltin under simple, undemanding conditions, affording (R)-2-hydroxypent-4-enoic acid esters 2 in good yield (61-90%) and enantioselectivity (58-76% ee).     

Extensive generalization of renormalized coupled-cluster methods

The recently developed completely renormalized (CR) coupled-cluster (CC) methods with singles, doubles, and noniterative triples or triples and quadruples [CR-CCSD(T) or CR-CCSD(TQ), respectively], which are based on the method of moments of CC equations (MMCC) [K. Kowalski and P. Piecuch, J. Chem. Phys. 113, 18 (2000)], eliminate the failures of the standard CCSD(T) and CCSD(TQ) methods at larger internuclear separations, but they are not rigorously size extensive. Although the departure from strict size extensivity of the CR-CCSD(T) and CR-CCSD(TQ) methods is small, it is important to examine the possibility of formulating the improved CR-CC methods, which are as effective in breaking chemical bonds as the existing CR-CCSD(T) and CR-CCSD(TQ) approaches, which are as easy to use as the CR-CCSD(T) and CR-CCSD(TQ) methods, and which can be made rigorously size extensive. This may be particularly useful for the applications of CR-CC methods and other MMCC approaches in calculations of potential energy surfaces of large many-electron systems and van der Waals molecules, where the additive separability of energies in the noninteracting limit is very important. In this paper, we propose different types of CR-CC approximations, termed the locally renormalized (LR) CCSD(T) and CCSD(TQ) methods, which become rigorously size extensive if the orbitals are localized on nointeracting fragments. The LR-CCSD(T) and LR-CCSD(TQ) methods rely on the form of the energy expression in terms of the generalized moments of CC equations, derived in this work, termed the numerator-denominator-connected MMCC expansion. The size extensivity and excellent performance of the LR-CCSD(T) and LR-CCSD(TQ) methods are illustrated numerically by showing the results for the dimers of stretched HF and LiH molecules and bond breaking in HF and H2O.     

A new strategy for the synthesis of pendant benzodiazacoronands and their use as components of chromatographic stationary phases

The synthesis of a novel class of functionalized benzophanes in which a (2′-hydroxy)ethoxy pendant arm is attached to the phenyl ring is reported. The reported approach, utilizes simple starting materials, and skillful organization of the synthetic steps allows for simultaneous transforms of the macrocyclic ring and the pendant arm. Binding studies of these systems with Pd²⁺ and Cd²⁺ cations is described. A chromatographic stationary phase containing the benzodiazacoronand moiety was also synthesized, and found to interact specifically with isomeric nitrobenzene derivatives.     

Development of a flexible approach to Nuphar alkaloids via two enantiospecific piperidine-forming reactions

In this paper we describe the stereoselective synthesis of functionalized lactam 7 via two enantiospecific piperidine-forming techniques and its employment in a general synthetic approach to Nuphar alkaloids. Specifically, the formation of piperidine 18 by formal [3 + 3] cycloaddition and stepwise annelation processes is described; the latter technique was found to be significantly more efficient than the Pd-catalyzed TMM addition process. Finally, exploitation of the exocyclic alkene installed in the piperidine-forming reaction in the transformation of 18 to (-)-deoxynupharidine ((-)-2), (-)-castoramine ((-)-3), and (-)-nupharolutine ((-)-4) via intermediate lactam 7 is delineated.     

Ultrathin-layer sodium dodecyl sulfate disc electrophoresis of proteins in the range from 10 to 220 kDa in homogeneous,low-concentrated polyacrylamide gels

This study describes an ultrathin-layer sodium dodecyl sulfate (SDS) disc electrophoresis in polyacrylamide gels of a thickness of only 150 microm. By use of 2-amino-2-methyl-1,3-propanediol/glycine instead of traditional Tris/HCl buffer in the resolving phase of the gel, proteins with a wide range of molecular sizes (10 kDa to over 220 kDa) are separated in unusually low-concentrated gels (4%T, 3.3%C). 2-Amino-2-methyl-1,3-propanediol in the resolving part of the gel contributes to stabilization of the pH value at 8.8, while glycine improves destacking as well as separation of small proteins from the bulk of stacked SDS. This method combines both the advantages of conventional slab-gel electrophoresis and capillary gel electrophoresis. It is easy to apply and well suited for all further miniaturization attempts.