Role of the spacer in the singlet-singlet energy transfer mechanism (Förster vs Dexter) in cofacial bisporphyrins

The cofacial bisporphyrins H4DPS (DPS = 4,6-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]dibenzothiophene), H4DPO (DPO = 4,6-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]dibenzofuran), H4DPX (DPX = 4,5-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]-9,9-dimethylxanthene), H4DPA (DPA = 1,8-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]anthracene), and H4DPB (DPB = 1,8-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]biphenylene) have been monometalated by Zn(OAc)2.2H2O and by GaCl3 to explore the singlet-singlet energy transfer from the photoexcited metal porphyrin center to the linked free base porphyrin. The spectroscopic (UV-vis and fluorescence) and photophysical properties (fluorescence lifetimes, tauF, and quantum yields, phiF) have been investigated at 298 and 77 K in degassed 2-MeTHF for the donor-acceptor systems, (Zn)H2DPS, (Zn)H2DPO, (Zn)H2DPA, (Zn)H2DPX, and (Zn)H2DPB, as well as for the bis-zinc complexes, (Zn)2DPS, (Zn)2DPO, (Zn)2DPX, and (Zn)2DPB, respectively, and the monoporphyrin derivatives, H2P, (Zn)P, and (Ga-OMe)P (P2- = 5-phenyl-2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrin-dianion). The singlet-singlet energy transfer rate constants (KET) were obtained using KET = (1/tauF -1/tauFo), where tauFo is the fluorescence lifetime of the corresponding bis-zinc(II) systems (or (Zn)P and (Ga-OMe)P) where no energy transfer occurs. The tauF value for three bis-zinc(II) compounds varies from 1.69 to 2.01 ns and is 1.84 (at 298 K) and 3.20 ns (at 77 K) for (Ga-OMe)P. In the donor-acceptor bismacrocycles, depending on the spacer and the temperature, the fluorescence lifetimes decrease down to 50-240 ps. The KET values range from approximately 4 to approximately 21 (ns(-1)) and have been analyzed considering both the F?rster and the Dexter mechanisms. Using the C(meso)-C(meso) distance parameters in the calculations, the F?rster and Dexter mechanisms operate for DPS and DPO, and for DPA, DPX, and DPB spacer systems, respectively. The limit distance where one mechanism dominates over the other is estimated to be around 5-6 A.     

Total synthesis of amaryllidaceae alkaloid buflavine

A concise synthesis of the amaryllidaceae alkaloid buflavine (1) and its regioisomer (2) involving sequential Meyers' biaryl coupling, enecarbamate formation, and hydrogenation followed by ultimate intramolecular reductive amination is presented.     

Electron impact induced fragmentation of β-allenic and γ-acetylenic alcohols

The main fragmentation pathway of ionized hydroxyallenes (1) consists of a methyl loss. Extensive deuterium-labelling experiments indicate that the terminal allenic carbon is implied in this fragmentation. Collisional activation spectra indicate a propenyl-acylium structure (a) for these [M – CH₃]⁺ ions which can originate from a 1,4-hydroxyl migration followed by hydrogen rearrangements. Isomeric hydroxyacetylenes (2) behave similarly, also giving rise, by methyl loss, to acylium ions a. It is proposed that 2^{+ ˙} is irreversibly isomerized into 1^{+ ˙} by a 1,3-hydrogen transfer ‘catalysed’ by the hydroxy group. The proposed internal proton-bound complex justifies also the easier loss of water from 2⁺˙. Ethyl loss is also a prominent fragmentation for the hydroxyallene and hydroxy-acetylene homologues.     

Crotomacrine, a new clerodane diterpene from the fruits of Croton macrostachyus

A new clerodane diterpene, crotomacrine 1, together with the known crotepoxide were isolated from the fruits of Croton macrostachyus. Their structures were elucidated on the basis of spectral evidence.     

Properties of block and graft copolymers of polybutadiene with small complexed poly(4-vinylpyridine) segments

Various diblocks, triblocks and a graft copolymer of butadiene with 4-vinylpyridine short blocks have been prepared. They were complexed with ZnCl₂ to give ionomer-like materials. For all copolymers, the T_g of the elastomeric block (?84°C to ?91°C) was unchanged by complexation. For all diblocks and triblocks with short blocks (DP _n ～ 3) the storage modulus was only slightly increased by comparison with uncomplexed materials. For the graft copolymer even with short blocks the material is less sensitive to temperature after complexation. For triblocks, when the DP _n of the vinylpyridine blocks was high enough (15 units), complexes were associated in multiplets of large size and the elastomeric properties were retained up to 200°C.     

Polyelectrolyte multilayers and degradable polymer layers as multicompartment films

Polyelectrolyte multilayers are now a well established concept with numerous potential applications in particular as biomaterial coatings. To timely control the biological activity of cells in contact with a substrate, multicompartment films made of different polyelectrolyte multilayers deposited sequentially on the solid substrate constitute a promising new approach. In a first paper (Langmuir 2004, 20, 7298) we showed that such multicompartment films can be designed by alternating exponentially growing polyelectrolyte multilayers acting as reservoirs and linearly growing ones acting as barriers. In the present study, we first demonstrate however that these barriers composed of synthetic polyelectrolytes are not degraded despite the presence of phagocytic cells. We propose an alternative approach where exponentially growing poly(L-lysine)/hyaluronic acid (PLL/HA) multilayers, used as reservoirs, are alternated with biodegradable polymer layers consisting in poly(lactic-co-glycolic acid) (PLGA) and acting as barriers for PLL chains that diffuse within the PLL/HA reservoirs. We first show that these PLGA layers can be deposited alternatively with PLL/HA multilayers leading to polyelectrolyte multilayer/hydrolyzable polymeric layer films and acting as a reservoirs/barriers system. Bone marrow cells seeded on these films ending by a PLL/HA reservoir rapidly degrade it and internalize the PLL chains confined in this reservoir. Then the cells degraded locally the PLGA barrier and internalize the PLL localized in a lower (PLL/HA) compartment after 5 days of seeding. By changing the thickness of the PLGA layer, we hope to be able to tune the time delay of degradation. Such mixed architectures made of polyelectrolyte multilayers and hydrolyzable polymeric layers could act as coatings allowing us to induce a time scheduled cascade of biological activities. We are currently working on the use of comparable films with compartments filled by proteins or peptides and in which the degradation of the barriers results from a hydrolysis over tunable time scales.     

Triplet state properties of the benzo[α]pyrene-DNA complex as determined by optically detected zero-field magnetic resonance

The zero-field transitions in the photoexcited triplet state of benzo[α]pyrene bound to DNA have been observed by optical detection of magnetic resonance of 2 K. The transition frequencies individual spin sublevel intersystem crossing rates were measured by monitoring the microwave-induced intensity changes of the triplettriplet absorption at 465.8 nm. The triplet state zero-field splitting and dynamics for the benzo[α]pyrene DNA complex are compared with these properties measured for benzo(α)pyrene in other solvent systems.     

Layer by layer buildup of polysaccharide films: physical chemistry and cellular adhesion aspects

The formation ofpolysaccharide films based on the alternate deposition of chitosan (CHI) and hyaluronan (HA) was investigated by several techniques. The multilayer buildup takes place in two stages: during the first stage, the surface is covered by isolated islets that grow and coalesce as the construction goes on. After several deposition steps, a continuous film is formed and the second stage of the buildup process takes place. The whole process is characterized by an exponential increase of the mass and thickness of the film with the number of deposition steps. This exponential growth mechanism is related to the ability of the polycation to diffuse "in" and "out" of the whole film at each deposition step. Using confocal laser microscopy and fluorescently labeled CHI, we show that such a diffusion behavior, already observed with poly(L-lysine) as a polycation, is also found with CHI, a polycation presenting a large persistence length. We also analyze the effect of the molecular weight (MW) of the diffusing polyelectrolyte (CHI) on the buildup process and observe a faster growth for low MW chitosan. The influence of the salt concentration during buildup is also investigated. Whereas the CHI/HA films grow rapidly at high salt concentration (0.15 M NaCl) with the formation of a uniform film after only a few deposition steps, it is very difficult to build the film at 10(-4) M NaCl. In this latter case, the deposited mass increases linearly with the number of deposition steps and the first deposition stage, where the surface is covered by islets, lasts at least up to 50 bilayer deposition steps. However, even at these low salt concentrations and in the islet configuration, CHI chains seem to diffuse in and out of the CHI/HA complexes. The linear mass increase of the film with the number of deposition steps despite the CHI diffusion is explained by a partial redissolution of the CHI/HA complexes forming the film during different steps of the buildup process. Finally, the uniform films built at high salt concentrations were also found to be chondrocyte resistant and, more interestingly, bacterial resistant. Therefore, the (CHI/HA) films may be used as an antimicrobial coating.     

Novel "Potentially antiaromatic", acidichromic quinonediimines with tunable delocalization of their 6 pi-electron subunits

We present a novel family of "potentially antiaromatic" alkyl-substituted p-benzoquinonediimine pH-dependent chromophores. It appears from the structural data that these overall 12 pi-electron molecules should be better considered as constituted by two chemically connected but electronically not conjugated 6 pi-electron subunits. Molecule 5 appears to be the first example of two separated, conjugated, and localized 6 pi-electron systems that can be tuned by reversible protonation to become delocalized. The mono- and diprotonated derivatives have been characterized by spectroscopic methods and X-ray diffraction. These systems develop supramolecular interactions in the solid state that clearly reflect the degree of protonation and depend on the nature of the counterion. These compounds constitute new chromophores for which the color can be tuned depending on the degree of protonation, going in solution from yellow for 5 to red for 5.HCl and blue for 5.2HCl. Theoretical calculations have provided a deeper insight into the electronic structure of these molecules and allowed an assignment of the experimental UV-vis spectra. The visible and near-UV spectrum of the neutral and protonated benzoquinonediimines can be classically assigned from the coupling of two 6 pi-electron polymethine units. TD-DFT calculations confirm the observed red shift of the two lowest pi --> pi* transitions of the benzoquinonediimines upon protonation and relate it to the moderate energy lowering of the HOMO --> LUMO transition induced by the delocalization of the polymethine pi system.     

Revised analysis of the structure of the v1 band of methane

The CARS spectrum of the v₁ band of ₁₂CH₄ at a pressure of 14 mbar was recorded using cw excitation in the cavity of a ring argon ion laser. The analysis of the intensity profile of the obarred spectrum led to the detection of inconsistencies with the hitherto proposed calculated positions of transitions with J = 7 to J = 10 and to a relocation of the corresponding lines.