Swelling and contraction of ferrocyanide-containing polyelectrolyte multilayers upon application of an electric potential

We developed a new platform at the interface of polyelectrolyte multilayers (PEMs) and electroactive polymers (EAPs) by combining the easy buildup of PEM thin films and the deformation characteristics of the EAPs. The PEM films were made of poly(L-glutamic acid) (PGA) and poly(allylamine hydrochloride) (PAH). After [Fe(CN)6]4- ions (FCIV) were added, cyclic voltammetry (CV) was performed, resulting in a reversible expansion and contraction of the film. The shape change as well as the film buildup prior to the cycling were monitored in situ using the electrochemical quartz crystal microbalance with dissipation monitoring (EC-QCM-D). Electrochemical atomic force microscopy (EC-AFM) images confirmed the rapid shape deformation. The process takes place in an aqueous environment under mild conditions (maximum potential of 600 mV and no pH change), which makes it a promising tool for biomedical applications. In addition, the electrochemically active films are produced using the layer-by-layer (LbL) method that is already established in biotechnology and biomaterials science; therefore, the presented approach can be readily adapted in these areas, bringing about a new possibility for the nanoscale dynamic control of coating thickness in various applications.     

Toposelective electrochemical desorption of thiol SAMs from neighboring polycrystalline gold surfaces

We describe a method for the selective desorption of thiol self-assembled monolayers from gold surfaces having micrometer-scale separations on a substrate. In an electrolyte solution, the electrical resistance between the adjacent areas can be much lower than the resistance between a surface and the counter electrode. Also, both reductive and oxidative thiol desorption may occur. Therefore, the potentials of the surfaces must be independently controlled with a multichannel potentiostat and operating windows for a given thiol/electrolyte system must be established. In this study operating windows were established for 1-dodecanethiol-based SAMs in phosphate buffer, phosphate-buffered saline, and sodium hydroxide solution, and selective SAM removal was successfully performed in a four-electrode configuration.     

Embedded silver ions-containing liposomes in polyelectrolyte multilayers: cargos films for antibacterial agents

A new antibacterial coating made of poly(L-lysine)/hyaluronic acid (PLL/HA) multilayer films and liposome aggregates loaded with silver ions was designed. Liposomes filled with an AgNO 3 solution were first aggregated by the addition of PLL in solution. The obtained micrometer-sized aggregates were then deposited on a PLL/HA multilayer film, playing the role of a spacer with the support. Finally, HA/PLL/HA capping layers were deposited on top of the architecture to form a composite AgNO 3 coating. Release of encapsulated AgNO 3 from this composite coating was followed and triggered upon temperature increase over the transition temperature of vesicles, found to be equal to 34 degrees C. After determination of the minimal inhibitory concentration (MIC) of AgNO 3 in solution, the antibacterial activity of the AgNO 3 coating was investigated against Escherichia coli. A 4-log reduction in the number of viable E. coli cells was observed after contact for 120 min with a 120 ng/cm (2) AgNO 3 coating. In comparison, no bactericidal activity was found for PLL/HA films previously dipped in an AgNO 3 solution and for PLL/HA films with liposome aggregates containing no AgNO 3 solution. The strong bactericidal effect could be linked to the diffusion of silver ions out of the AgNO 3 coating, leading to an important bactericidal concentration close to the membrane of the bacteria. A simple method to prepare antibacterial coatings loaded with a high and controlled amount of AgNO 3 is therefore proposed. This procedure is far superior to that soaking AgNO 3 or Ag nanoparticles into a coating. In principle, other small bactericidal chemicals like antibiotics could be encapsulated by this method. This study opens a new route to modify surfaces with small solutes that are not permeating phospholipid membranes below the phase transition temperature.     

Further conventions for NMR shielding and chemical shifts (IUPAC Recommendations 2008)

IUPAC has published a number of recommendations regarding the reporting of nuclear magnetic resonance (NMR) data, especially chemical shifts. The most recent publication [Pure Appl. Chem. 73, 1795 (2001)] recommended that tetramethylsilane (TMS) serve as a universal reference for reporting the shifts of all nuclides, but it deferred recommendations for several aspects of this subject. This document first examines the extent to which the (1)H shielding in TMS itself is subject to change by variation in temperature, concentration, and solvent. On the basis of recently published results, it has been established that the shielding of TMS in solution [along with that of sodium-3-(trimethylsilyl)propanesulfonate, DSS, often used as a reference for aqueous solutions] varies only slightly with temperature but is subject to solvent perturbations of a few tenths of a part per million (ppm). Recommendations are given for reporting chemical shifts under most routine experimental conditions and for quantifying effects of temperature and solvent variation, including the use of magnetic susceptibility corrections and of magic-angle spinning (MAS). This document provides the first IUPAC recommendations for referencing and reporting chemical shifts in solids, based on high-resolution MAS studies. Procedures are given for relating (13)C NMR chemical shifts in solids to the scales used for high-resolution studies in the liquid phase. The notation and terminology used for describing chemical shift and shielding tensors in solids are reviewed in some detail, and recommendations are given for best practice.     

Statistical quantification of the influence of material properties on the oxidation and ignition of activated carbons

The influence of material properties on the reactivities of activated carbon materials have been studied on a laboratory scale. Carbon samples having diversified origin and properties were characterized using a thermogravimetry (TG) coupled with a differential scanning calorimetry (DSC). Reactivity parameters like the Point of Initial Oxidation (PIO) representing the beginning of the oxidation reactions and the Spontaneous Ignition Temperature (SIT) where the bed combustion takes place in a self sustaining manner were experimentally determined. The intrinsic properties of the activated carbons influencing oxidation and ignition were examined qualitatively followed by quantitative statistical correlations. Results from both qualitative and statistical correlations showed that increase in the oxygen content in the form of surface oxygenated groups increased the reactivity of activated carbons. It was by far the single most influential property discriminated from the analysis. The porosity characteristics like the specific surface area and pore volume did show some vague trends but could not be validated like that of the oxygen content. The effects of these individual properties on the oxidation and ignition reactivity are discussed.     

Sensing the chirality of Dawson lanthanide polyoxometalates [alpha1-LnP2W17O61]7- by multinuclear NMR spectroscopy

Lanthanide complexes of the chiral Dawson phosphotungstate [alpha(1)-P(2)W(17)O(61)](10-) were used to study the formation of diastereomers with optically pure organic ligands. The present work started with the full assignment of the (183)W NMR spectra of [alpha(1)-Yb(H(2)O)(4)P(2)W(17)O(61)](7-) at different temperatures and concentrations, which allowed the structure of the dimerized form in aqueous solution to be established. Different enantiopure amino acids and phosphonic acids were screened as ligands. Both types allowed chiral differentiation by multinuclear NMR spectroscopy under fast-exchange conditions. Functional groups with a good affinity for the oxo framework of the polyoxometalate were identified, and maps of the interactions between L-serine and N-phosphonomethyl-L-proline with [alpha(1)-Yb(H(2)O)(4)P(2)W(17)O(61)](7-) were established. This demonstrates the power of (183)W NMR spectroscopy to elucidate the molecular recognition of inorganic molecules by organic compounds. N-Phosphonomethyl-L-proline appears to be a convenient ligand to promote separation of the diastereomers and ultimately resolution of the enantiomers of [alpha(1)-Yb(H(2)O)(4)P(2)W(17)O(61)](7-).     

Total synthesis of (+)-cassaine via transannular Diels-Alder reaction

A full account of the total synthesis of (+)-cassaine ( 1) using the transannular Diels-Alder (TADA) reaction as the pivotal construction is described. The strategy began from Evans' oxazolidine 8, the only chiral source used for the total stereochemical outcome of the target molecule. The key intermediate 3 was obtained from 8 in 10 steps in 40% overall yield. Following extensive optimization, the coupling of 3 on both ends with another densely functional partner 2 followed by TADA reaction on macrocycle 4 cleanly furnished the tricycle 5. The stereochemical outcome in 5 was expected via a least-energetic transition state T4. A stereoselective reduction, hydroboration, and methyl cuprate 1,4-addition along with a few other functional interconversions transformed 5 into the key intermediate 37. Final tethering of dimethylaminoethyloxycarbonyl along with epimerization at C8 and alcohol deprotection at C3 yielded the natural product 1.     

Pore-filling-dependent selectivity effects in the vapor-phase separation of xylene isomers on the metal-organic framework MIL-47

Vapor-phase adsorption and separation of the C8 alkylaromatic components p-xylene, m-xylene, o-xylene, and ethylbenzene on the metal-organic framework MIL-47 have been studied. Low coverage Henry adsorption constants and adsorption enthalpies were determined using the pulse chromatographic technique at temperatures between 230 and 290 degrees C. The four C8 alkylaromatic components have comparable Henry constants and adsorption enthalpies. Adsorption isotherms of the pure components were determined using the gravimetric technique at 70, 110, and 150 degrees C. The adsorption capacity and steepness of the isotherms differs among the components and are strongly temperature dependent. Breakthrough experiments with several binary mixtures were performed at 70-150 degrees C and varying total hydrocarbon pressure from 0.0004 to 0.05 bar. Separation of the different isomers could be achieved. In general, it was found that the adsorption selectivity increases with increasing partial pressure or degree of pore filling. The separation at a high degree of pore filling in the vapor phase is a result of differences in packing modes of the C8 alkylaromatic components in the pores of MIL-47.     

G-quadruplex DNA assemblies: loop length, cation identity, and multimer formation

G-rich DNA sequences are able to fold into structures called G-quadruplexes. To obtain general trends in the influence of loop length on the structure and stability of G-quadruplex structures, we studied oligodeoxynucleotides with random bases in the loops. Sequences studied are dGGGW(i)GGGW(j)GGGW(k)GGG, with W = thymine or adenine with equal probability, and i, j, and k comprised between 1 and 4. All were studied by circular dichroism, native gel electrophoresis, UV-monitored thermal denaturation, and electrospray mass spectrometry, in the presence of 150 mM potassium, sodium, or ammonium cations. Parallel conformations are favored by sequences with short loops, but we also found that sequences with short loops form very stable multimeric quadruplexes, even at low strand concentration. Mass spectrometry reveals the formation of dimers and trimers. When the loop length increases, preferred quadruplex conformations tend to be more intramolecular and antiparallel. The nature of the cation also has an influence on the adopted structures, with K(+) inducing more parallel multimers than NH4(+) and Na(+). Structural possibilities are discussed for the new quadruplex higher-order assemblies.