Spherical coordinate representations of solvent composition for liquid chromatography method development using experimental design

One of the major techniques used for the method development of ternary and quaternary high performance liquid chromatography (HPLC) systems has been to use mixture designs, often referred to as "Glajch's Triangle". This technique does not allow for the systematic and simultaneous optimization of other factors such as gradient time, pH and temperature that affect the quality of separations. An alternative approach is to use experimental designs. The condition, however, that the composition of all components of the mobile phase must total 100% presents a problem when trying to mathematically represent ranges of each mobile phase constituent of a ternary or quaternary system. A method is described here, based on spherical coordinate representations, that adheres to the constraints of the mobile phase composition and allows experimental designs, such as central composite and factorial designs, to be applied to the simultaneous optimization of the mobile phase composition. Other factors, in particular temperature and gradient time, can then be included in the design. As a result of applying these designs to the HPLC separation of phenols and corticosteroids, it was found necessary to include three-way interactions between experimental factors in the model. The significance of these interactions shows that they need to be considered in HPLC method development.     

Synthesis and structural characterization of [PhE(BNMe2)2]2 (E = P or As): Six-Membered P2B4 and As2B4 Rings with Unusual Structures

The reaction of either Li₂PPh or Li₂AsPh with the diborane(4) derivative B₂(NMe₂)₂Br₂ affords the compounds [PhP(BNMe₂)₂]₂ ( 1 ) or [PhAs(BNMe₂)₂]₂ ( 2 ) in good yield. Both 1 and 2 have cyclic structures featuring non-planar P₂B₄ or As₂B₄ six-membered rings which have chair configurations. Although all four borons in each ring have planar coordination, the two phosphorus or arsenic centers have different degrees of pyramidalization. Bond distances within the rings indicate that the B? B, B? P or B? As bonds are single, whereas the exo-B? N bond lengths are consistent with significant π-bonding. The ring structures of 1 and 2 are in sharp contrast to the related boron-nitrogen species (t-BuN)₂N₄Me₄ which has a nido-N₂B₄ framework. The attempted synthesis of the nitrogen analogue of 1 or 2 by using a similar approach did not result in the isolation of [PhN(BNMe₂)₂]₂, instead the tetramino diborane(4) species [B(NMe₂)NHPh]₂ ( 3 ), which has a structure similar to other tetramine diborane(4) compounds, was isolated.     

The phase-dependent photochemical reaction dynamics of halooxides and nitrosyl halides

Recent progress in understanding the phase-dependent reactivity of halooxides and nitrosyl halides is outlined. Halooxide reactivity is represented by the photochemistry of chlorine dioxide (OClO) and dichlorine monoxide (ClOCl). The gas phase photochemical dynamics of OClO are contrasted with the dynamics in condensed environments. The role of excited-state symmetry in defining the reaction dynamics and the observation of photoisomerization resulting in the production of ClOO are discussed. The current understanding of the excited-state reaction dynamics of ClOCl and evidence for photoisomerization of this species resulting in the production of ClClO are outlined. Finally, the photochemical reaction dynamics of the nitrosyl halide ClNO are presented. The main difference between the gas and condensed phase reaction dynamics of this species is that whereas photodissociation to form Cl and NO dominates the gas phase reaction dynamics, photoisomerization resulting in ClON production occurs to an appreciable extent in condensed environments. The observation of photoisomerization for OClO, ClOCl and ClNO suggests that this process is a general feature of the condensed phase reaction dynamics for smaller halooxides and nitrosyl halides. Finally, future areas for study in both halooxide and nitrosyl halide photoreactivity are outlined.     

Amperometric biosensor for the rapid determination of salicylate in whole blood

A method for the determination of salicylate in whole blood is described. The assay uses salicylate hydroxylase to convert salicylate to catechol in the presence of NADH and molecular oxygen. The formation of catechol is monitored amperometrically by oxidation at +300 mV vs.Ag/AgCl and the size of the oxidation current is related to the concentration of salicylate in the sample. The reagents are incorporated into the working electrode of a disposable strip, allowing measurements to be made on a drop of blood within 1 min. The functional range of the assay can be extended to the equivalent of 7.2 mM plasma salicylate by incorporating benzoate as a component of the reaction system. The method has the advantages of simplicity and speed compared with standard procedures, and should prove especially useful in suspected overdose situations.     

Transport and kinetics at microheterogeneous electrodes: Part V. The methylviologen/platinum system

Results are reported for the reaction of methylviologen radical cation, MV⁺ with platinum colloidal particles, studied by stopped flow spectrophotometry. The rate of the reaction depends on the gaseous pretreatment of the particles. For particles reduced by hydrogen, the kinetics are usually first order with respect to MV⁺. The reaction is also first order in the concentration of platinum, and is inhibited in a first order manner by the product MV²⁺. This inhibition suggests that MV²⁺ is adsorbed on the particle surfaces, and this has been confirmed by ac, ring—disc electrode studies on macroscopic platinum electrodes. At high concentrations of MV⁺ some deviation from first order kinetics is observed. These results are all explained by a kinetic model in which either the desorption of MV²⁺ or the adsorption of MV⁺ is the rate limiting process. The rate of consumption of MV⁺ on an oxidised surface is an order of magnitude faster than that on the reduced surface. Ring—disc studies show that this is because the MV⁺ is not producing H₂ but is reducing the surface oxide. The results are shown to fit a simple model which takes into account this titration of the oxide layer. The model also explains why the rate on partially oxidised surfaces will appear to have an order greater than one in [Pt].     

Solvent-induced supramolecular isomerism in [Pt(S=C(NH2)2)4]2+ croconate salts

The role of solvent (and other species) in the formation of networks from tetrakis(thiourea)platinum(II) cations and croconate anions is examined, with crystallisations from DMSO giving rise to a structure containing solvent filled channels.     

Adiabatic potentials for a bridged three-site electron-transfer system

Born—Oppenheimer potential surfaces for a bridged three-site electron-transfer system are calculated. The adiabatic potentials depend upon both the vibrational sum and difference coordinates. Along the vibrational difference coordinate, the ground-state surface has single-minimun form when the through-bridge electronic coupling is strong, and double-minimum form for weak through-bridge coupling. The results are compared to those previously reported for two-site models.     

Ultra-fast essential oil characterization by capillary GC on a 50 microm ID column

A 5 m x 50 microm capillary column with 0.05 microm stationary phase film thickness, with a calculated efficiency of almost 20,000 plates per metre (under optimum conditions), was used for very fasthigh resolution GC analysis of lime essential oil. The total analysis time of this volatile essential oil was less than 90 s. Fast GC is shown to be appropriate for essential oil quality assurance analysis, and quantitative results of key components are comparable with those obtained by using conventional GC analysis. The fast GC analysis is approximately 33 times faster than the conventional GC method.     

Separation of positional isomers by the use of coupled shape-selective stationary phase columns

The successful separation of 2- and 3-methyl-substituted positional isomers of butanol, butyl acetate, and butanoic acid and its ethyl ester, is reported. These compounds are of interest in the study of wine flavour, however the separation of the 2- and 3-methyl isomers may present problems, and more so in the presence of the wine matrix components, when single capillary column gas chromatography (GC) is used. The strategy to achieve separation was based on the use of shape-selective cyclodextrin derivative (CDD) capillary columns (commonly referred to as chiral columns). These columns provide simultaneous resolution of the enantiomeric pairs of the 2-methyl isomers, and at the same time the ability to separate the 3-methyl isomer from the 2-methyl is achieved in all but the case of the ( S)-2- and 3-methylbutanol. The advantages of using shape-selective columns to perform this study is demonstrated, with coupling of two CDD columns giving improved separations of these compounds. Although these compounds are relatively volatile, cryogenic modulated comprehensive two-dimensional GC was shown to provide good pulsed peak profiles with chiral separation in the first dimension when a thicker film trapping column segment was employed. The components of interest were well separated from other wine matrix components.